This investigation?s task was to map manufacturing of special qualities at Stora Enso Packaging under a certain period, analyze if rules concerning special qualities is followed, which consequences this results in concerning use of paper, waste and costs and to give suggestions on alternative solutions. The goal was to give sugges-tions that help the company to reach its business ratio that the production de-partment uses within use of paper and productivity in the corrugated cardboard machine.Stora Enso Packaging is a part of the forest group Stora Enso and is one of Swe-den?s leading producers of corrugated cardboard. Stora Enso Packaging acts pri-mary on the Swedish market, where they have a market share of 25 %.To be able to analyze orders with special qualities we did a data collection during two months, where we mapped incoming orders.

This thesis explores some issues regarding estimations of the cost of capital on the Stockholm Stock Exchange through reverse engineering of the Residual Income Valuation model and through usage of the Capital Asset Pricing Model. Previous studies are in conflict of whether the risk premium changes considerably over time or not. Furthermore, the risk premium estimated by CAPM tends to be fairly stable. In this study, reverse engineering of the cost of capital implied by analysts? forecasts shows a significant difference in the risk premium over time.

In Sweden the real estate sector accounts for 33 % of energy consumption and just below 10 % of the emission of carbon dioxide. As a consequence of the external pressure from climate change it?s in everybody?s interest to reduce the energy consumption and thus reduce the emission of carbon dioxide. An additional incentive to reduce the energy consumption is the substantial increase of the energy price since the deregulation of the electricity market in 1996.In this study the techniques that exist to build multi-storey residential buildings with high energy performance will be investigated. Further the study intends to investigate the optimal energy performance from a real estate economic perspective.In order to investigate the optimal energy performance a model has been created with the parameters investment cost, rental revenues, operation and maintenance cost, discount rate and investment horizon.The result shows a relationship between a high investment cost and a high energy performance for newly constructed multi-storey residential buildings.

The purpose of this thesis is to analyze and propose improvements to the current procedure for cost estimations of purchased maintenance work at Banverket, the Swedish rail administration. This governmental institution is responsible for the procurement of maintenance services for the country?s railroad network through open tenders. Due to the generally low number of contractors, it is particularly necessary to establish accurate cost estimates in order to assess the offers and ensure that a fair price is being paid to the suppliers. Several flaws associated with the current practice are identified and analyzed according to cost accounting theories.

In our everyday life we are faced with many choices that have consequences on the environment. One of these is the food we choose to eat since food production has a big impact on the environment. In organic production the aim is to have a natural production process, where environmental impacts are minimized. By choosing organic food it is therefore possible to contribute to a better environment. A large number of meals are served every day in the public sector, which makes it an important player in the consumer sector that could make a major difference for the environment..

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

The Armed Forces is looking to improve control of where articles are and the monitoring of their condition within its clothing supply. That is why Försvarets Materielverk is working on a motion to tag the Armed Forces clothing with passive RFID-tags. A cost/benefit analysis has been made in this report in order to find out whether the investment is economical justifiable and what costs and benefits arose. The analysis tool that was used is based on the PENG-model. The analysis had three scenarios with the difference that each scenario included various amounts of clothing to tag.  There has also been made an analysis where only the benefits regarding decreasing amount of lost clothes and simplified inventory were included.The result of the first analysis was that none of the scenarios was profitable during the first year.

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

At a manufacturing company, due to the competition the price is reducedtowards the manufacturing cost. Therefore it is important to maintain control ofones costs and keep calculations up-to-date.This thesis deals with cost accounting at a aluminium-processing company. The report focuses on calculating machine cost per hour since the manufacturing costs are the major part of the total product cost.Managers on the company believe that the costs they use in calculations todayneither is up-to-date nor advantageous in a market aspect and due to that their calculations need to be revised. The machines cost per hour is a major part in the manufacturing calculation. The company wants to provide a competitive price that also covers their costs.

Abstract Title: Total Cost of Ownership ? Revealing the true cost of owning and operating equipment. Authors: Anna Bladh Anna Ström Tutors: Michaela Boye, Parts and Service, PTD, Alfa Laval Göran Berg, Parts and Service, PTD, Alfa LavalCharlotta Johnsson, Department of Automatic Control, LTH, Lund UniversityBertil I. Nilsson, Department of Industrial Management and Logistics, LTH, Lund UniversityCarl-Henric Nilsson, Department of Business Administration, Lund University Core issue: ?Which costs should be included in a general Total Cost of Ownership model regarding centrifuges, and what input variables are needed in order to calculate those costs in a user-friendly way and with a maintained level of accuracy?? Purpose: The theoretical purpose of the thesis is to identify the cost items that have the greatest impact on a TCO calculation for a centrifuge.

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.