This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.

Ericsson AB in Katrineholm is a part of the Section Business Unit Network in the Ericsson Group. The plant's main task is to produce printed circuit boards in small volumes with a high product mix and focus on delivery and cost effectiveness. At the factory they produce printed circuit boards in the Module department.The Module department has for a long time had a high output of non-approved circuit boards in their production. This has led to a growing stock of non-approved circuit boards on the company?s repair department.The purpose of this thesis is to investigate how Ericsson in Katrineholm can increase the outflow of approved articles in their test process in the Module department.

In 2010, Airwatergreen AB started testing their new technology, the Airwaterwell, an atmospherical water generator of their own design that is running on solar heat, with a production capacity of three litres of water per day and m2. The purpose was to focus on foreign aid organizations as main purchasers for project investments towards rural communities in developing countries that suffer from lack of, or compromised quality of drinking water. In order to further understand if this technology would bring a positive impact in the developing countries, the company contacted the Swedish University of Agriculture for a socio-economic study of the Airwaterwells? potential. The authors elected Cost benefit analysis as the appropriate method for conducting the study and India became the study region because of its many problems with water related issues such as diseases as well as insufficient water supply for households. The regions that this study is based on are Gujarat, Haryana and Uttar Pradesh given their differences in income, health situation and poverty rate.

Prescribed burning was commonly used for site preparation in Sweden to establish new forests until the 1960?s, when mechanical scarification was introduced. During recent decades the interest in prescribed burnings has increased again, mainly due to certifications of forestry stating that 5% of the regeneration areas should be burned on dry and mesic soils. The objective of the study was to evaluate actual influence of prescribed burning compared to other site preparation on stand stem density, growth parameters and tree damages for Scots pine (Pinus sylvestris L.) after direct seeding and planting. The study also attempts to simulate growth until first thinning.

The competition for Norway spruce pulp wood in Central Sweden increases, forcing the supply-structure of Holmen to face two important challenges. Firstly, it is of the outmost strategically importance to secure the long-term supply of Norway spruce pulp wood to the industries. Secondly, Holmen desires to increase the obtainable volume of Norway spruce pulp wood. This would enable the company to choose volumes in the lower price-segments and thereby decrease the dependency of costly marginal volumes. As this work shows, one part in managing these challenges could be to lower the quality standards concerning root rot (Heterobasidium annosum). Facts presented in the work shows that: 1. Technically, the TMP-industry of Braviken can handle a much more rotted pulp wood than that used today, although the cost of refinement increases.

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

The municipality of Enköping is presently working out a new layout plan for the town of Enköping and new residences are planned in the harbour area. Because of these plans, the municipal energy company ENA Energi may have to move its location from the harbour to another part of the city.The aim of this degree project is to investigate the possibility of building a new CHP plant in another area of Enköping. The future demand on district heating and infrastructure at the new location have been projected. A new CHP plant has been dimensioned and economic analyses concerning the project have been made.Results show that the future demand of district heating in Enköping will differ a little from the present needs. In 2030, the district heating production is expected to be c.

Yahtzee is a popular dice game around the world. The complexity makes the game interesting to play and analyze. This report compares the effectiveness of the mathematically optimal strategy with a strategy that can be used for casual play. The rules used are those of the Nordic variant Yatzy, in which a few but important rules are different from the American Yahtzee. To evaluate the everyday strategy 100,000 games was simulated in a java program written specifically for this purpose.

During the 1970?s the interest for quality management and the concept of quality costs increased considerably. Business leaders noticed that there was a great potential for reducing costs of poor quality. Since up to 10-30% of a company?s total turnover may consist of poor quality costs some consider them as an unexploited goldmine.

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

Title: Besparingar inom Barn- och utbildningsnämnden.Seminar date: 29th of May 2009Course: Degree thesis in Business Administration, bachelor thesisAuthors: Amela Smajlovic and Sten SundfeltAdvisor: Leif HolmbergPurpose: Our purpose is to explain the cost-saving process that many municipality organisations face because of the global financial crisis.Limitations: We have limited our study to the municipality of Landskrona and Kristianstad.Method: Our study has a qualitative approach. By using open interviews we have been able to get an open dialog with our respondents.Theory: We have compared with different theories, such as Rombach?s budget-theory and Wildavsky?s role theory.Empirics: The material is based on interviews and conversations with key figures in different levels of the organisations in Landskrona and Kristianstad.Conclusions: The success of a cost-saving process depends on the engagement, awareness and how inclined to changes the persons in the organisations are. Has everybody the willingness to take responsibility fore the organisation and the changes that the surrounding world claims?.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

This study concerns how organizations manage various problematic areaswhen implementeing Business Intelligence and experiences from BusinessIntelligence project failures on management level. In order to highlightthese questions, we have carried out interviews with four organizationswhich have great experience in working with Business Intelligence on adaily basis.The result of the study shows that all organizations deal with difficultiesregarding cost-benefit issues and justification concerning BusinessIntelligence investments. The result also showed that the organizationsfaced difficulties with integration concerning time and cost. Documentingand securing support systems presented different attitudes between theorganizations, primary in the question about sub complements to BusinessIntelligence and in the way that they were documented. In the discourse oflegal issues and privacy the majority of the organizations chose not to storepersonal information relative to legal security demands.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..