A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

A large proportion of businesses around the world is today ISO 9001 certified and is consequently conducting internal audits on a regular basis. It has however not been possible to conclude that internal audits always add value to the organisation, despite the large utilisation of this tool. Some authors, e.g. Alic & Rusjan (2010) and Wealleans (2000), mean that there are possibilities that internal audits may be used as a value-adding improvement tool. This has led to the emergence of this master?s thesis.The purpose of the case study was therefore formulated to examine how internal quality audits can be made more effective and used as an improvement tool.

Göteborg Energi has a surplus of district heating during spring, summer and fall. The heat surplus is due to a constant production of waste heat from oil refineries and heat from waste incineration over the year. It would be desirable to increase the demand for heat and the uptime for the newly built combined heat and power generation plant, Rya Kraftvärmeverk. One alternative could be to integrate Rya Kraftvärmeverk with a pellet production facility. By producing heat, electricity and pellet in a joint process the energy use can be decreased.

As a consequence of a turbulent financial market with recurring recessions, the Basel regime was developed, an institutional change with the purpose to create enhanced financial stability through increased capital requirements and increased scrutiny of internal procedures. The Basel regime is an often recurring element in social debates where various aspects are discussed, one of which is whether it maintains its purpose to secure financial stability or whether it is cost effective, and if not, who gets affected by these potential costs.The majority of previously conducted research within this area agrees with the opinion that changes in the regulatory framework within the financial markets, such as the Basel regime, has led to reduced risk of bankruptcy for the banks which has contributed to increased global financial stability. However, research illustrates that these types of changes in the regulatory framework impose a financial burden leading to contradictions in the division of these costs between costumers and shareholders. This dissertation has been conducted from a shareholders perspective, out of which the study ?s three hypothesis has been created from.The data in this study is built upon the stock price from the three largest available banks? shares (based on total assets), in the 26 countries which are represented in the Basel committee from (2007) to (2013).

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Competition in the market of interior design during the last several years has drastically increased. The consumers of today are very conscious about what the market can offer and therefore they have high demands on the products. It is not only the function of the product that matters but also the design that makes a difference. Companies are becoming more aware of this and as a result they have to find a way to set themselves apart in order to attract customers. This realization has led designers and economists to cooperate in a different way than before.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.

The purpose of this paper is to describe and analyze two factors contributing to child labor in Ghana, one of the world's largest producers of cocoa. These two factors are: poor countries economic and political dependency on the rich countries, political leader?s ambitions and decisions. We will also describe and analyze the UN's efforts and measures to combat child labor. The method we used was a case study of child labor in Ghana?s cocoa industry together with interviews.

The purpose of this study has been to examine a few Swedish advertisment producers opinions on the subject of viral advertising and especially the ethical aspects of hidden viral advertising. The specified purpose of this paper is to:To clarify the underlying reasons for the use of viral advertising.To clarify the advertising producers ethical views on hidden viral advertising.The essay is based on a qualitive research metod of an abductive nature where the empirical data is derived from interviews with three advertisment producers. Through a stratified selection method we contacted agencies that in one way or another uses digital solutions as an advertisment method. All interviews were conducted via the digital chat room Skype, one of the interviews were conducted with both picture and sound and the other two with audio-only.The following points are the essential conclusions of our study:Hidden viral advertising is seen as a rare promotional method in Sweden today, however, the viral-spread effect is more commonly used.The economic factors together with the spreading capacity of the viral advertising is contributing to one of the biggest reasons behind the use of viral advertising. In addition to these, viral advertising is seen as an effective way to stand out from traditional advertising.Viral advertising where the sender is hidden or unclear is always seen as unethical.

An effective Integration policy is important in Sweden while our government has decided and committed to be a country where everybody will be given the same opportunities. There is a greater awareness in today?s society of integration policy goals such as equal rights, responsibilities and opportunities for all. In a number of areas, however, the disparities between immigrants and Swedish-born citizens are still too large.The Swedish Riksdag decided on integration policy in 1997. The main task for this thesis will be to examine the motive behind the Government's decision to revoke immigrations policy and introduce integration policy.

The purpose of my task was to map the pallet flows at Findus and put together as well as analyze the problems. My work has also included finding out what alternatives there are to the present pallet exchange system and suggest measures to reduce the problems.The problems can be divided into poor quality and hygiene issues. The poor quality, for instance poor strength is due to arbitrary judgements and the fact that there are companies that make a system of manufacturing forged pallets of an inferior quality compared to the EUR-pallets. These pallets are marked with stamps more or less similar to the EUR-mark and taken into the exchange system. Of course there are rules how to judge a pallet but these rules are many and sometimes indistinct and there are a lot of marks to keep track of.The most dangerous part is when the pallets lack the prescribed carrying capacity.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.