
Sökresultat:
2298 Uppsatser om Cost-benefit - Sida 11 av 154
En ekonomisk utvärdering av framtida biobränslebaserade processkoncept inom energisektorn
The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.
Studie till uppstartande av annonskatalog
Sten Jonsson wants to start a production of an advertising catalogue for small companies in Sweden. Acatalogue where the advertisingcost is so low that most of the companies can afford to participate. Thecompanies who will advertise should be manufacturing companies in trades of carpentry, sheet metalworkshops, forging workshops and engineering workshops.The catalogue will facilitate for the manufacturer to reach the costumer without any middleman.Without a middleman creates a possibility for an opinion about the product at the same time as theprice can be held low. A catalogue of this type would benefit the marketing of the companies at the sametime as it would generate an occasion for innovations.The possible target groups are property companies, construct companies and farmers.A market research has been carried out contained a postal interview and a phone interview. Themarket research carried out to get an understanding in what the companies think about the idea butalso to see if the companies are in interest of advertise in the catalogue.
The Future of ABC at Sandvik Tooling
Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.
Kyla i Nyköping och Motala : Kartläggning av kylapotential för Vattenfall Värm
The Swedish energy company Vattenfall is currently the owner of the district heatingsystems in Nyköping and Motala. To be able to also offer cooling solutions tocustomers are becoming more and more important. This report describes the resultsof an investigation of the cooling market in the two cities and the potential needs forcooling today and in the coming 20 years. The total potential for the coming 20 yearsis estimated to be roughly 17 MW for Nyköping and 9 MW for Motala.Two possible district cooling systems for each of the two city centers was modeledand a comparison was made between different cooling techniques namely absorptionand compressor chillers.Absorption chillers driven with district heating during the summer is one way ofincreasing the load in a combined heat and power plant and thereby the possibleelectricity generation. The cost of heat production must be low for absorption chillerto be able to compete as an alternative.
Trähägn en tänkbar metod för viltskydd i Svenskt skogsbruk?
This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.
Avvägning mellan ordersärkostnad och lagerhållningskostnad i processindustrin
Lean Production is used by many manufacturing companies. Companies in process industries do not use Lean Production to the same extent today. This is part of the report's issue to explore how Lean Production can be applied to a company in the process industries.The investigated company is a processing company that manufactures various types of foil. The company wishes to streamline its production and has therefore asked the authors to examine if Lean Production can offer the company improvements in their production. Lean Production value stream mapping tool has been selected to identify and analyze the current state of two of its products in production.
Göta älvbron, övervakning med optisk fiber : Ekonomisk analys
The Göta älv-bridge is a welded steelbridge which is located in Gothenburg,it connects the inner city of Gothenburgwith the island Hisingen. Cracks wasdiscovered in the steel in 1999-2000which started an investigation of thebridge to clearify the condition of thebridge. The conclusion was a monitoringsystem based on laser light sent throughan optical fiber.This report describes the bridge, thedamages, the monitoring system and thetraffic on the bridge.Stefan Pup, at Vectura Borlänge was mysupervisor during this work. In myinvestigation the costs of themonitoring system and the costs ofclosing the bridge is compared andevaluated. The biggest investigatingpart is the costs of closing the bridge.The results of my investigations is thatclosing the Göta älv-bridge would cost 1107 300 SEK / day.
Beslutsmodell för inköp och lagerhållning av motorer i ett produktionssystem : En fallstudie på Sandvik
AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated. It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.
Outsourcing - Ett alternativ att nå kostnadseffektiva lösningar
Background: outsourcing is one of the most obvious and continuous trends that has been able to study during the past ten years and also has had a strong development in the industry. What consequences will follow from an extended outsourcing? Purpose: the study?s overall purpose is to investigate what possibilities and risks that can be connected to an outsourcing decision and how the order of the service will handle the risks. The study will also investigate what management philosophy that will be used and regulate the outsourcing relation and how the company?s strategy will affect the decision and how the process of outsourcing will look like.
Lönsamheten vid nystart av slaktsvinsproduktion : en fallstudie
I have done a case-study about building a new stable for slaughter pigs at a farm close to Kalmar. The farm is able to supply the breeding with cereals and it has enough area to
spread the manure on. The most important factors to gain profit, is the cost for building
the stable, the price of the feeding-stuff and the growth of the pigs. The discount from
the slaughter-house was less important than I thought from the beginning, and it?s a
factor that is hard to influence.
With the new production of slaughter-pig and cattle that already exist on the farm, the
farm will get a well-functioned rotation of crops with lye and autumn rape as
interruption-crop.
Produktkalkylering vid bearbetande småföretag
Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.
Stubbskörd : från modell till verklighet
In the near future we need to reduce the greenhouse gas emissions significantly for the benefit of the environment around us. The European Union has de-manded a variety of climate and energy goals to be achieved by year 2020, the ?20-20-20? targets. With these aims, The European Union means that we must reduce our emissions from fossil fuels and instead increase our renewable fuels.
With stump harvest in the forest it?s possible to increase the use of renewable fuels and reduce our emissions from fossil fuels.
Aktieindexobligationer : Småspararens Livbåt på Vägen mot Djupt Vatten?
The main purpose of the essay was to evaluate whether investments in index-linked bonds were suitable investments for smaller investors on the international finance market. To determine whether the index-linked bonds are good investments, the variables yield, cost and risk were used to measure the index-linked bonds against investments in stocks and funds. The reason for the interest in this subject is that investments in index-linked bonds have grown furiously the last few years. With the growth of the investments the criticism of index-linked bonds has also grown stronger. The critics? main point is the cost of the product, and they imply that investors can create their own index-linked bond and thereby avoid the bank fees.This study used a quantitative approach, because all the data of yield, cost and risk consist of numbers.
Verksamhetsstyrning: Utrikesdepartementets personalbostäder
The purpose of this thesis is to find means of control that secure cost efficiency regarding the accommodation for the employees on missions abroad of the Swedish Ministry for Foreign Affairs. Today the ministry?s cost for the employees? rented housing is 100 million SEK and there is a need of improvement in the control of these costs. A work method for organizational development will be used in order to reach the findings presented in the thesis. First we study the strengths and weaknesses in today?s control system.
Undersökning av avfallshantering i Stockholms innerstad
According to the European Union waste hierarchy, waste should first of all be minimized. Reuse and material and energy recycling come next. Lastly the waste should be thrown at the refuse tip. In the inner city of Stockholm waste handling can be done in various types of ways. The solutions vary as a result of the type of architecture of the building and its condition.