The technology used in the development of web-applications is evolving at such rate that it has become more and more important to keep web-applications modern. If an application is based on a technical platform that is not renewed, the platform may over time develop into an obstacle in further development of the application. There may be compatibility issues and some of the code may be unnecessary due to abstraction, and therefore more time consuming to work with. Sometimes the reason may be that an application has been built to run, and is running on an application server that is no longer being maintained. The system can be large and modernization can cost a lot.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

The relatively poor economy in European dairy farming might be improved from efficient feeding systems and dietary management. Increasing herd sizes and transition to loose housing systems in Sweden, increases the possibilities for other feeding systems than separate feeding that is the traditional feeding system in Sweden. Other possible feeding systems are partial mixed ration (PMR) and total mixed ration (TMR), where the TMR system sometimes is associated with overfeeding and thereby increased environmental impact and high feed cost. Diets providing nutrients above or below animal requirements are considered as unbalanced, which in turn are associated with reductions in health, fertility and milk production. On the other hand, a balanced feed ration improves feed efficiency, nitrogen utilization and profitability.

In this project, we are studying the material flow and the information flow of sample materials and the appurtenant report of deviation for the purpose to be able to suggest better solutions. The sample material, which is to be analysed, is to be continuously taken from the production flow. The purpose is to navigate the process by the results found by the analysis. Because of this, it's very important that both methods of analysis are ensured and that the sample material is representative for the production flow. However, even more importantly, is that activities and transportations, combined with both flows, must perform in a quick and correct way in order to maintain or improve Höganäs AB's competitive strength.According to reports are about 20 products per day not available, for loading, at the time of delivery.

The purpose of this study was to analyze two local tourism related organizations in Umeå and how they used the marketing method Storytelling. The aim of this study was to examine what kind of stories the tourism related organizations were using, what these stories said in a direct, or in-direct way and how the reception was of the stories and the destinations. A qualitative study in the form of a discourse analysis based on Laclau and Mouffe's view on discourse analysis was conducted. The results of this study shows that storytelling is more effective when it is incorporated in the whole destination/organization when it comes to tourism related organizations and destinations. It also shows that storytelling in itself isn't only an innocent and positive tool and can cause negative feelings if used wrongly for an organization/destination.

Sten Jonsson wants to start a production of an advertising catalogue for small companies in Sweden. Acatalogue where the advertisingcost is so low that most of the companies can afford to participate. Thecompanies who will advertise should be manufacturing companies in trades of carpentry, sheet metalworkshops, forging workshops and engineering workshops.The catalogue will facilitate for the manufacturer to reach the costumer without any middleman.Without a middleman creates a possibility for an opinion about the product at the same time as theprice can be held low. A catalogue of this type would benefit the marketing of the companies at the sametime as it would generate an occasion for innovations.The possible target groups are property companies, construct companies and farmers.A market research has been carried out contained a postal interview and a phone interview. Themarket research carried out to get an understanding in what the companies think about the idea butalso to see if the companies are in interest of advertise in the catalogue.

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

During the early 1990´s, the Swedish commercial air traffic was de-regulated and the new market-condition made it possible for low-budget airlines to enter the Swedish market. The former monopolistic airline company, Scandinavian Airline Systems (SAS), was facing a new type of competition which had the advantage of offering much cheaper air trips than SAS. Adding the decrease of profitability that struck SAS as well as other airline companies after the terrorist attacks on the 11th of September, forced them to carry out a mayor reorganization programme. The programme, called ?Turn Around 2005?, was a direct economical measure that begun in 2002 and lasted until 2005 and resulted in a cost saving of 14,5 billion SEK as well as a notice or a transfer of 6000 employees.The purpose of this essay is to investigate if the opinion of the consumer, the image, corresponds with the profile that SAS wishes to mediate today.

The Swedish energy company Vattenfall is currently the owner of the district heatingsystems in Nyköping and Motala. To be able to also offer cooling solutions tocustomers are becoming more and more important. This report describes the resultsof an investigation of the cooling market in the two cities and the potential needs forcooling today and in the coming 20 years. The total potential for the coming 20 yearsis estimated to be roughly 17 MW for Nyköping and 9 MW for Motala.Two possible district cooling systems for each of the two city centers was modeledand a comparison was made between different cooling techniques namely absorptionand compressor chillers.Absorption chillers driven with district heating during the summer is one way ofincreasing the load in a combined heat and power plant and thereby the possibleelectricity generation. The cost of heat production must be low for absorption chillerto be able to compete as an alternative.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

Lean Production is used by many manufacturing companies. Companies in process industries do not use Lean Production to the same extent today. This is part of the report's issue to explore how Lean Production can be applied to a company in the process industries.The investigated company is a processing company that manufactures various types of foil. The company wishes to streamline its production and has therefore asked the authors to examine if Lean Production can offer the company improvements in their production. Lean Production value stream mapping tool has been selected to identify and analyze the current state of two of its products in production.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

The Göta älv-bridge is a welded steelbridge which is located in Gothenburg,it connects the inner city of Gothenburgwith the island Hisingen. Cracks wasdiscovered in the steel in 1999-2000which started an investigation of thebridge to clearify the condition of thebridge. The conclusion was a monitoringsystem based on laser light sent throughan optical fiber.This report describes the bridge, thedamages, the monitoring system and thetraffic on the bridge.Stefan Pup, at Vectura Borlänge was mysupervisor during this work. In myinvestigation the costs of themonitoring system and the costs ofclosing the bridge is compared andevaluated. The biggest investigatingpart is the costs of closing the bridge.The results of my investigations is thatclosing the Göta älv-bridge would cost 1107 300 SEK / day.

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.