Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

Logistics planning for a construction site is usually limited by traffic flow to and from the workplace. The geographical location of the construction site is determined by roads around the workplace and opportunities for well-functioning logistics. Inventory of material is often impossible because of the frequently small workspaces. As a result, a concern relating material handling remains . Even before the establishment of a construction site, it is required in the construction industry to eliminate errors that might arise in the planning stage.

During the transportation of logging residues (LR) the material´s low density is a problem that results in low use of pay-load capacity. Comminution or compression of LR are possible methods to increase pay-loads. In the present thesis studied a bundling machine which was mounted on a truck chassis, and the subsequent transport and crushing. The truck bundler created bundles that were larger and longer than other bundling equipment on the market. The objectives were to determine the total time consumption and its allocation over work element and machinery, to measure dry matter (DM) content of green and brown LR-bundles.

The aim of this study is to describe the market for Digital Signage in Sweden and give the reader an increased insight and understanding of the problems that suppliers and buyers of Digital Signage may encounter. The study is abductive and based on a number of qualitative interviews with representatives from potential buyers, an existing user, a supplier and a number of companies with insight into Digital Signage. Our findings show that the companies in this study have not yet reached the stage of being ready to invest in a system for Digital Signage, since the effects on for instance increased sales and potential savings on marketing communication have not yet been clearly proven. Furthermore the study shows that it is important that a supplier has a fundamental understanding of the business model of the buyer. In addition to this, service, support and IT-related issues are of great importance for the potential buyers.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

The last decades the populations of wild boar (Sus scrofa) has increased rapidly over the species? entire European range, including Sweden. This is followed by increasing human-wildlife conflicts as a result of the wild boar foraging behavior, causing damage to agricultural crop fields due to trampling and feeding. To be able to minimize damage we need more knowledge of where in the fields the risk of damage is high and what features in the landscape that affect this risk. I analyzed damage distribution in relation to the distance to six different landscape features; forest, road, ditch, building, game field and bait station, in the study area, the Island Mörkö in eastern central Sweden.

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

Background: The construction industry is Sweden?s single most important industry branch with a significant influence on Sweden?s wealth. The political restrictions that once controlled the industry are today almost gone. This combined with an unbalanced supply and demand situation on the Swedish constructions market, caused by urbanisation, has led to increased pressure on the Swedish construction companies who now are forced to find new methods in their struggle to contain or increase their competitive advantage. Purpose: The purpose of this thesis is to survey: which strategic variables are of great importance in today?s Swedish construction industry with focus on the four main actors, JM, NCC, PEAB and Skanska.

Background: The value of stock recommendations have been debated for a century andthe debate has escalated since Alfred Cowles (1933) published his research in ?Can StockMarket Forecasters Forecast?? As of late, savings in stocks has increased and the householdsare managing their savings more actively. The consequence of the increased interestin stocks has resulted in a growing market for stock recommendations. Not just financialmedia but daily newspapers have embraced this new found interest, hence stock recom-mendations can be found in almost all large newspapers in Sweden. Furthermore, this phe-nomenon has also lead to intensified research within stock recommendations.

The aim of this two year master thesis is to analyze how digital preservation is presented as a problem in the Swedish national strategy for the digitization and digital preservation of the Swedish cultural heritage. In order to study which assumptions about digital preservation exists within the strategy I apply the discourse oriented methodological tools presented by Carol Lee Bacchi, which focuses on discerning what problem or, rather, representation of a problem exists within a specific policy. This study is a post-structuralist discourse analysis. The main focus of the study is on what assumptions and prerequisites the dominating representation of the problem is based upon and how the representation has evolved. The main material of the study consists of public investigations conducted by the Swedish state, governmental propositions and replies as well as other public documents upon which Bacci's methodological tools are applied.Results show that digital preservation is primarily interpreted as a financial problem as the national strategy and its surrounding documents stress the need of cost-efficient solutions.