This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

Tryckeribranschen är en ekonomiskt pressad bransch som söker nya besparingsmetoder. En av metoderna är att minska insatsvaran tryckfärg med färgreduceringsprogramvara.Rapporten undersöker möjligheterna med färgreduceringssystem. Detta genom att studera hur man använder sig av färgreducering och hur det påverkar trycket.Studien avser besvara:? Hur stor färgminskning kan man använda sig av utan negativa konsekvenser på bildkvalitén?? Hur går man tillväga för att skapa den färgminskningen?? Överensstämmer total färgförändring och visuell bedömning av tryck?För att få svar på dessa frågor togs en testform fram med nödvändiga bilder och färgfält som sedan genomgick en rad färgreduktioner. Testformen utvärderades digitalt med avseende på TAC och total färgförändring.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.

Storm water is defined as runoff from precipitation such as rain or snow. It is collected in sewage disposal systems and since it mainly originates from urban areas it can contain high levels of heavy metals, nutrients and oil etc. Polluted storm water is currently treated by different methods such as wet ponds, constructed wetlands and filter strips. This study investigates these methods, which in earlier studies have shown to give varying results regarding their treatment efficiency.This thesis has been written on commission of SWECO VIAK and was aimed at studying those parameters that may affect the treatment efficiency of nutrients and heavy metals in storm water treatment facilities (STF:s). Through literature studies the dominating treatment processes in ponds and wetlands were examined.

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of heavy metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.

A Biogas plant in SLU?s (Swedish University of Agricultural Sciences) management sustains to behave in con-nection with the new animal stables at Lövsta. There will primarily manure from stables that rot to biogas. The biogas plant will also have the capacity that rot others substrates that can arise in the farm operation. The aim with the biogas plant is to produce non fossil electrical and gas heat for own customs, to reduce smell impact from stables and to make possible different types of research investments within the area.This study has implemented multiple cases study of different investment scenarios.

Pharmaceuticals that are found in marine ecosystems are a threatening environmental concern, which is known to harm both animal and plant life. One of the reasons for this problem is that the waste water treatment techniques are not optimized to clear waste water from its pharmaceuticals contain. In this master thesis four Swedish treatment wetlands were studied, and their ability to reduce numerous pharmaceuticals in waste water. The four treatment wetlands that were studied were those in Oxelösund, Trosa, Nynäshamn and Eskilstuna. Two ecotoxicological tests and chemical analysis were used.

In the year of 2005 the international standard IAS 40 came in to use in Sweden, this lead to an opportunity for the corporations to choose either to evaluate their investment properties according to the historical cost accounting principal. The model contains the obtaining price with reduction for the planned writing off. The alternative that IAS40 offers is the fairvalue principal, which evaluate the investment properties by consideration of the income versus outcome and surrounding factors for every accounting periodSince the fairvalue is buildt on numbers the corporations them self choose what to publish and for how long the value depreciation should be lasting before it should be taken up as an unrealized value change in the reporting material. This means that there is a big chance that the evaluation can be distortedSince we just recently have had strong cyclical variation and are on our way from an excess boom into a weak economic climate, this will be the first study performed about fair value in a weak economic climate since the adoption of IAS40.The purpose of the essay is to find out how well the booked value of investment properties owned by corporations listed on the Swedish stock market accord with the fairvalue that the market and the Swedish property index indicates on. To be able to test this connection we gathered information from the corporation?s annual reports which we compiled to see how the market comprehends.

Antalet flygresor har ökat markant i världen de senaste decennierna. Detta har medfört en ökning av flygets koldioxidutsläpp som därmed har gett en ökad påverkan på klimatet. Forskning angående människors syn på och uppfattning om flyget är relativt ny och forskning rörande ämnet är mer förekommande idag än för ett decennium sedan. Tidigare undersökningar är dock i stort sett eniga om att människor, både miljömedvetna och icke-miljömedvetna personer, inte tänker ändra på sina flygvanor och flyga mindre på grund av flygets klimatpåverkan. Denna studie undersöker klimatengagerade personers flygvanor och vad de har för syn på flyget och flygets påverkan på klimatet.

Within the field of welfare research, few people take into account both the aspect of gender and class. Thetraditional class-oriented research has a one-dimensional perspective on gender and the feminist welfare researchrarely carry out large comparative studies. A multi-dimensional perspective on the construction ofgender and class would benefit from both the feminist and class welfare-oriented research, and contribute toincreasing the knowledge about the individual's experience and attitudes to work and work time. The aim ofthis paper is to examine the correlation of the intersectional relationship between sex / gender position andclass position with the attitudes and motives for working time reduction. Especially in, (1) the value in work,and (2) the attitude to a high number of working hours, as well as (3) its combined effect on the conflict betweenwork and family.

The increase of complexity in embedded programming is forcing the development of higher level programminglanguages. These languages not only consist of traditional text based programming but also with graphical programminglanguages such as the programming language G from LabVIEW which is developed by National Instruments and havebeen around since the mid eighties. However since 2004 this language has also been able to program embeddedhardware, using the modules LabVIEW SDK and LabVIEW for ARM. This thesis shows how LabVIEW for ARM converts itsgraphical language G to C and then how C is flashed into the microprocessor. The thesis also takes up the pros and consof using G for embedded development.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.