Purpose/Aim: The aim of this study is to (1) analyze the amount of exposure disability sports get in Swedens biggest newspaper (Aftonbladet), (2) look at how Aftonbladet portraits disability sports and it?s athletes, and finally (3)  to see if there has occurred any change over time (during the last eight years). Material/Method: The first method used is a quantitative analysis to measure exposure.The second method is a quantitative content analysis which is used to analyze how disability sports are portrait.The third method is rhetorical and is also used to analyze how disability sports are portrayed. Main results: The study has shown that disability sports get very little exposure in Aftonbladet. The articles in the newspaper that cover disability sports are portrayed from a personal point of view without much focus on the athletes achievements regarding his or her sport.

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

The last decades the populations of wild boar (Sus scrofa) has increased rapidly over the species? entire European range, including Sweden. This is followed by increasing human-wildlife conflicts as a result of the wild boar foraging behavior, causing damage to agricultural crop fields due to trampling and feeding. To be able to minimize damage we need more knowledge of where in the fields the risk of damage is high and what features in the landscape that affect this risk. I analyzed damage distribution in relation to the distance to six different landscape features; forest, road, ditch, building, game field and bait station, in the study area, the Island Mörkö in eastern central Sweden.

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

This study was conducted in the Master program at The Music Pedagogical Center (MPC) at The Royal College of Music in Stockholm. Korta musikresor (Short Music Journeys) is the Swedish term used for a receptive method of music therapy adapted from the tradition of The Bonny Method of Guided Imagery and Music (BMGIM) and the theory and practice of Expressive Arts Therapy. The KMR method uses carefully selected short pieces of music, lasting between 2 and 5 minutes, to work on various psychological problems and life- crises. The music session is conducted in a slightly altered state of consciousness with a clear focus being established beforehand in a verbal dialogue with the psychotherapist. There is also the possibility of using artwork to process and explore the imagery after the music listening.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

This study was conducted in the Master program at The Music Pedagogical Center (MPC) at The Royal College of Music in Stockholm. Korta musikresor (Short Music Journeys) is the Swedish term used for a receptive method of music therapy adapted from the tradition of The Bonny Method of Guided Imagery and Music (BMGIM) and the theory and practice of Expressive Arts Therapy. The KMR method uses carefully selected short pieces of music, lasting between 2 and 5 minutes, to work on various psychological problems and life- crises. The music session is conducted in a slightly altered state of consciousness with a clear focus being established beforehand in a verbal dialogue with the psychotherapist. There is also the possibility of using artwork to process and explore the imagery after the music listening.

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.

This thesis takes on a broader perspective of the modern age phenomenon we call spam. One of the aims of this thesis is to present and to compare the variety of methods used in the day-to-day fight against spam, as far they have evolved today, but also to present and discuss some alternative methods for suggested future use. The properties of a common e-mail spam are analyzed to show how the components that make up the structure in an e-mail can be used to classify spam. Furthermore I explain the naïve Bayesian classification methods, the signature-based method, the commonly used rule-based method and the challenge and response method and discuss these. The widespread use of blacklists is also explained and a close new variant to blacklisting, Turntide is presented and discussed.

 AbstractSystem methodology is in the very heart of system development, it is a crucial part of how you define your work, how you choose to approach the actual problem at hand and how to solve it. Researchers in the system development field has shown that not all methods in theory are in compliance with how it is practiced by the companies who use them. In our thesis we have studied a larger international IT- company and one of their local offices in Sweden, who some years back changed their system development method from a more traditional to an agile one. Our aim of this study has been to establish whether both of these methods has differed between theory and in actual use, and if so, why this has occurred and what the underlying rationality might have been to promote this change. Our questions that we sought to answer were; 1.

The Swedish government have a goal that wind turbines shall produce 30 TWh by the year 2020, compared to about 3,5 TWh produced in Sweden during 2010. To minimize the disturbance that wind turbines create the Swedish Environmental Protection Agency has stated a guideline value that noise from wind turbines at nearby residents shouldn?t exceed 40 dBA, at 8 m/s wind speed. With advanced calculation models, like Nord 2000, the emitted sound from future wind turbines can be calculated at an early stage to optimize the power production without exceeding the 40 dBA. When the turbines have been built there is a need to verify that they really are within the guideline.

The aim of this two year master thesis is to analyze how digital preservation is presented as a problem in the Swedish national strategy for the digitization and digital preservation of the Swedish cultural heritage. In order to study which assumptions about digital preservation exists within the strategy I apply the discourse oriented methodological tools presented by Carol Lee Bacchi, which focuses on discerning what problem or, rather, representation of a problem exists within a specific policy. This study is a post-structuralist discourse analysis. The main focus of the study is on what assumptions and prerequisites the dominating representation of the problem is based upon and how the representation has evolved. The main material of the study consists of public investigations conducted by the Swedish state, governmental propositions and replies as well as other public documents upon which Bacci's methodological tools are applied.Results show that digital preservation is primarily interpreted as a financial problem as the national strategy and its surrounding documents stress the need of cost-efficient solutions.

Abstract This research is about outdoor education as a pedagogical method, and its purpose is to find out six teachers thoughts about outdoor learning, and their experiences about this method.Many philosophers and advocates for the outdoor education claims that learning is best acquired when children uses all their senses and that school subjects that are thought in the classrooms also can be thought outdoors.  Studies have shown that children´s health and learning ability increase when they are thought outdoors.Interviews and observations have been done.My questions are: How do the teachers practice outdoor education in their classes and what is the result? Which subjects do they use in outdoor education? Do the teachers see any obstacles using the outdoor method and why do the not use it to a greater extent? Keywords: Outdoor education, outdoor mathematics, learning and effects, children, thoughts and expiriences. .