A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The study presented here is about how to make the special needs user who has a profound intellectual disability and additional disabilities more involved in their implementation plan. Based on a life story interview the study aims at analyzing perceptions of procedures to enhance special needs users? influence. The method used in this study was a qualitative research approach as an overall approach in order to use a narrative method where life history is the method. The focus has been to study a part of an individual life history - a specific domain in the life of the interviewee?s working career.

Denna slutreflektion kommer att beskriva planeringen och utvecklingen av en alternativ sorts arbetsmetod kallad Cloudmetoden, vilken lämpar sig för mindre arbetsgrupper som utvecklar digitala medier (i vårt fall spelproduktion). Slutreflektionen kommer att innehålla beskrivningar om vilket typ av problematik som gjorde att vi valde att skapa ett eget sätt att arbeta. Vi diskuterar och jämför vår arbetsmetod med redan existerande projektmetoder inom digitala spel. Vi kommer nämna de produkter som har skapats med hjälp av vårt arbetssätt och hur vi arbetade med dessa. Nyckelord: Cloudmetoden, spelproduktion, projektmetod, alternativ, digitala medier.

Background: Health economic evaluations are becoming an increasingly important means of analysing which care alternative resource utilisation is the most cost effective. It is a new topic in the medical device industry that causes much uncertainty and unstructured use of the actors involved.Study questions: Why is it difficult to develop, implement and disseminate this standardized health economic evaluation models in medical technology? Is there a possibility to standardize health economic evaluations within the medical device industry?Purpose: The purpose of this study is to investigate the standardization issues for health economic evaluations within the medical device industry.Method: A qualitative approach was used in the form of interviews with five actors that are active or have a connection to the medical device industry. The data collection consists of journals, reports, Internet searches and literature among other things.Conclusion: It is possible to standardize, but with certain restrictions such as the county council's budget, influence of industry-specific factors, lack of knowledge and the important interaction between actors..

This thesis is an investigation of Iranian immigrants and their use of libraries in Sweden. It isbased on a combination of a qualitative and a·quantitative method.Using a qualitative method, I give an outline of the history of lran from ancient times up to the present, as well as the different ethnological groups in Iran and their cultures. The main objective of this part is to clarify the contrasts between Iranian and Swedish cultural, social, linguistic and family structures, and also the characteristics of the crisis that most immigrants go through on their arrival in the new country. The qualitative method also involves structured telephone interviews with eight highly educated Iranians.This method was supplemented by a quantitative study through questionnaires of the attitudes· of lranian immigrants to libraries and reading. Iranians in Sweden turned out to be frequent Iibrary users.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of heavy metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.

This thesis is a product development project that was performed at Alfa Laval Tumba AB. In the past Alfa Laval have manufactured gas separators for engines where gas flows were cleaned from oil. A new business area for this kind of technology has shown to be the manufacturing industry where oil mist has to be separated from the vented air. Therefore a new and bigger design is needed to be able to handle the greater gas flows. A product like that would be a strong competitor on the market when the maintenance would be low in comparison to today?s equipment.During the project several concept suggestions were developed using customer interviews and research as input.

The door and its surrounding, is an important part of all buildings. It often amount to a significant part of buildings total costs. The more demands of functions the largerdoes the costs grow.The purpose of this report is to analyze those demands and how to fulfill them.Another purpose is to examine of which reasons the cost grow and how to avoid it inthe best possible way. The study will be performed in collaboration with Bjerking AB. To define the demands a literature study will also be performed.

Bakgrund: Fetma är ett folkhälsoproblem som har ökat dramatiskt de senaste två decennierna. För att behandla extrem fetma har magsäcksoperationer blivit en allt mer vanlig metod. De hälsoekonomiska aspekterna av operation har ännu inte studerats i Sverige. Syfte: Studiens syfte var att belysa hälsoekonomiska aspekter av magsäcksoperationer som intervention mot fetma. Metod: Metoden var en litteraturstudie.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

Introduction: Taxes result in a big cost for corporations which create an incentive for tax planning. Previous studies have demonstrated that it's the management team and the board of directors that influences to what extent the corporation is going to tax plan. We want to study underlying factors for how the composition of the groups affect the tax planning in a corporation based on four demographic traits; sex, nationality, age and duration.Purpose: The purpose with the study is to explain how the composition of the management team and the board of directors affect the corporations tax planning.Method: The study has a deductive approach where theories about the composition of the board of directors and the management team have been used to derive hypothesis. The empirical material has been collected from Nasdaq OMX Stockholm. Two different measures have been used to calculate the corporations tax planning.Results and Conclusions: The result of the study demonstrates that the composition of both the board of directors and the management team has an effect on corporations tax planning.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

Background: Theoretical, it?s been questioned why dividends exists in companies based upon the fact that there is a separation between ownership and control. According to the agency theoretical perception, dividends is used as a manner to unify the interest of this separation, which in turn lower the agency cost, and increase the efficiency of companies.Purpose: The aim of this master thesis is to scrutinize and analyse the association between Swedish firms? owner structure and owner types and their inclination to dividend.Method: We attack the problem with a hypothetical-deductive research method by using the existence of a universal theory, the agency theory. From our theoretical framework we propose a set of hypotheses.