Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

This paper studies the research foundations created in 1994 from the former wage earners? funds out of a portfolio management point of view. Firstly it describes the seven largest foundations and their different portfolio management structures. Secondly it analyses the performance of these foundations measured as the intercept, Jensen?s a, in a linear regression of the excess returns of a portfolio versus a proxy for the market, as well as the Sharpe-ratio.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

This thesis is an investigation of Iranian immigrants and their use of libraries in Sweden. It isbased on a combination of a qualitative and a·quantitative method.Using a qualitative method, I give an outline of the history of lran from ancient times up to the present, as well as the different ethnological groups in Iran and their cultures. The main objective of this part is to clarify the contrasts between Iranian and Swedish cultural, social, linguistic and family structures, and also the characteristics of the crisis that most immigrants go through on their arrival in the new country. The qualitative method also involves structured telephone interviews with eight highly educated Iranians.This method was supplemented by a quantitative study through questionnaires of the attitudes· of lranian immigrants to libraries and reading. Iranians in Sweden turned out to be frequent Iibrary users.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

Servera R&S AB is Sweden?s largest wholesale company within the restaurant and food service industry. Servera R&S AB is the daughter company to Axel Johnson AB, which in turn is a part of the Axel Johnson Group with Antonia Ax:son Johnson as the owner. Servera is a nation wide company with a business concept of offering a complete selection of merchandise and services to the professional food service market. The company is split into for different regions: the north region, the middle region, the southwest region, and the southeast region and has its headquarter in Stockholm.

IKEA is probably one of the most well known Swedish companies in the world. During thepast decades millions of people all across the globe have decorated their homes according tothe style of IKEA. But just exactly how big and influential are they? Many, if not to say all,municipalities in Sweden wants IKEA to establish and build their famous stores in one oftheir towns. But at what cost? When deciding on a municipality to establish in, IKEAnormally tends to have an advantage when it comes to controlling the conditions and terms ofthe establishment.To undertake this dissertation I use a theory based upon the inter-organizational theoriescalled resource dependency theory.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Proteins are vital to all cells in the body. They consist of long chains of amino acids. To be able to study the amino acid composition of a protein it is necessary to hydrolyse it, followed by separation and quantification. When the protein is hydrolysed, in this case ß-lactoglobulin, the protein is divided into individual amino acids. The method that traditionally has been used to hydrolyse proteins takes 24-72 hours to complete.

This thesis approaches the problem of estimating the arm angles of an industrial robot with flexibilities in joints and links. Due to cost-cutting efforts in the industrial robots industry, weaker components and more cost-effective structures have been introduced which in turn has led to problems with flexibilities, nonlinearities and friction. In order to handle these challenging dynamic problems and achieve high accuracy this study introduces state observers to estimate the tool position.The observers use measurements of the motor angles and an accelerometer and the different evaluated observers are based on an Extended Kalman Filter and a deterministic variant. They have been evaluated in experiments on an industrial robot with two degrees of freedom. The experimental verification shows that the state estimates can be highly accurate for medium frequency motions, ranging from 3-30Hz.

I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.

The overall purpose of this essay was to provide a better understanding of the importance of discretion for social workers in direct social services. To answer the purpose three questions were formulated: (1) How do social workers define and describe their discretion and their ability to independently accomplish their work? (2) How do social workers experience that workplace organization, policies and economic conditions interact with their discretion and (3) How do social workers experience that the interaction with the client can affect how they use their discretion in the individual case? The method used was qualitative interviews. The theoretical framework was Michael Lipskys (1980) Street-level bureaucracy and the four themes organization, professional role, skills and interaction.The results showed that the respondents, although they did not consider themselves to be affected by the economy still adapted to budget restrictions when they said that they were cost conscious in their work. This adjustment to budget framework could possibly be what made them not feel limited in their work.

The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.