AbstractThe purpose of this study is to analyse the reading- and writing-approaches: the LTG-method and the whole language-theory. The attention is to perform a comparative literate-study to distinguish their similarities and differences, and examine which one of the approaches that is most clearly anchored in the syllabus of the subject Swedish. The starting-point of the study is the questions: Which similarities respectively differences have the LTG-method and the whole language-theory? Which one of these theories is most clearly anchored in the syllabus of the subject Swedish? The study has shown that both the whole language-theory and the LTG-method can anchor in the syllabus for Swedish. However the whole language-theory has stronger hold in the syllabus, as the whole language emphasises the meaning of literature for reading- and writing-learning, and considers the pupils reflection during their learning-process and conquered knowledge-goal.

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

Type 2 diabetes is a growing disease in the population which includes that older people are a risk group. With the disease grows even cost?s. A lifestyle change is a major part of the treatment for type 2 diabetes. There are several factors that suggest positive effects on prevention among the elderly where, among other things, economic and health benefits are presented.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

Traditionally, rolling mills use emulsions based on a mixture of oil and water for lubrication. Since two years ago SAPA has been using (instead of oil) a synthetic lubricant so called conditional emulsion for hot-rolling of aluminum. This lubricant is water based and homogenous at ambient temperature, but switches to a two-phase system at heating above the cloud point.This project aims to validate and if necessary modify an existing HPLC method for quantifying two out of three key components (A, B and C) in the conditional emulsion. Attempts to develop a method to quantify the pH adjusting components, X and Y were also made. These two methods are required to optimize the lubricant.Due to the complexity of the components, it has been difficult to present a method for quantification, and HPLC with ELS detection was chosen after a long series of trials.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

The purpose of this study was to build a database for point-bearing piles in dense noncohesive soil, predominantly moraine. Further, the database was analysed and areas with difficult geotechnical conditions was identified.The database includes for point-bearing piles driven to refusal in moraine. Piles with mainly shaft friction have been excluded. Only concrete piles have been included. Geographically the database covers almost all geotechnical conditions of Sweden.

Background: Long-term stress can lead to reduced health among nurses which can result in impaired quality of care. Stress in nurses' work needs to be studied in order to prevent stress and impaired quality of care. Aim: The aim of this study was to describe nurses' experience of occupational stress and factors that contribute to occupational stress. Method: The method used was a literature review. Results: The analysis resulted in five themes which describe nurses' experiences of occupational stress and factors that contribute to occupational stress.

This essay aims to investigate a rare method of marking up timber before hewing it. The method for marking up timber is by eyesight, where visual judgment and the use of a broad axe are the tools employed. The broad axe is driven through the bark and exposes the inner bark in a straight line. The method is described by a craftsperson dating back to the 1930s. There is a lack of information regarding the method.

Bachelor thesis, Controller, Program of Master of Science in Business and Economics, School of Business and Economics at Linneaus University in Växjö, Sweden, Course Code: 2FE13E:3, Spring 2012 Authors: Jacob Cedergren, Adam Pettersson, Hampus SkelterwijkSupervisor: Anders JerrelingTitle: The ERP-systems impact of the management control - a case study of VIDA AB Original Title: Affärssystemens påverkan på ekonomistyrningen - en fallstudie på VIDA ABBackground: New technology has given businesses new opportunities to use and store information and the current information systems has changed the way of working in more or less all sectors and operations. ERP-systems have been one of the most important IT innovations in the past decade. The potential of a properly implemented ERP-system is great because it has got the ability to link the company?s different areas together. Despite its many advantages, there are several examples of cases where the acquisition and implementation has been a total failure.

This thesis aims on adding another piece to the puzzle that is the supplier relationship research. Taking its base in a series of articles regarding the transformations of global supply chains into more long-term profitable ones. Two research questions are presented, one regarding long-term supplier relationships and one regarding the main criteria?s while evaluating new suppliers. With an emphasis on the long-term relationship and profitability are five medium sized Swedish manu-facturers examined through semi-structured interviews.

The purpose with our study is to investigate in which way a public field of action has succeeded to make the economic management more effective and also find out which factors/activities that have contributed to get the result of the budget in balance. We also want to find out in which degree the balanced scorecard (BSC) has contributed to the positive result of the budget. Method: We had started out from the qualitative method theory which is based on the hermeneutic theory, because we will interpret and understand. With this starting point we have chosen to use a case study with semi-standardised interviews supplemented with information from different documents, and to get the theoretic connection we have studied literature in the subject field. The analyse and even the theoretic connection have then started from, for this study, a special analyse model.