An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.

Sweden has a natural gas grid extending along the west coast, from Trelleborg to Stenungsund. There are also several smaller local networks where a planned natural gas pipeline from Skutskär to Hofors prompted the need for a comprehensive study. This study examines the linkages that exist in terms of technology and market of natural gas and biogas in Sweden. Sweden has set high targets for the future with ambition to become independent of coal and oil as energy sources. Since 1985, a part of the solution has been import of Danish natural gas.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.

Background: The reasons why this study is conducted is because of the latest recession in the global economy. The current recession has made a lot of companies more aware of its cost, and in order to fit the new harsher economic climate the companies has to be more cost efficient. In order to do so many companies choose to reduce their amount of employees. When this happens in a recession, most of the layoffs are an effect of reactive causes, such as lower incoming orders, and fewer customers. This leads to a problem for the companies that don?t know how these kinds of layoffs will affect the value of the company?s stock.

Bakgrund: Sedan introduktionen i början av 1990-talet har utvecklingen av volymen nyemitterade aktieindexobligationerna totalt sett varit positiv vilket tyder på att produkten blivit en populär sparform hos svenskar. Detta tillsammans med det faktum att det finns få studier gjorda kring aktieindexobligationer som sparform där ett större perspektiv tas i beaktande gör ämnet intressant att studera.Syfte: Uppsatsens syfte är att kartlägga och analysera för vilka privata investerare aktieindexobligationer passar som sparform ur ett livscykelperspektiv med utgångspunkt i (i) bransch- och rådgivningspraxis, (ii) finansiell riskhanteringsteori med fokus på portföljvalsteori och (iii) historisk data avseende risk och avkastning.Genomförande: Studien har genomförts med hjälp av att intervjua privatrådgivare, kapitalrådgivare och personer som arbetar med strukturerade produkter på storbanker och hos mindre finansiella aktörer. Fem stereotyper har använts som diskussionsunderlag vid intervjuerna. För att kunna föra en djupare analys kring produkten som sparform för privata investerare har en portföljoptimering genomförts för att ta historisk data gällande risk och avkastning i beaktande.Slutsats: Studien fastställer att produkten passar privata investerare som befinner sig i den senare delen av konsolideringsfasen och inte är de mest riskbenägna. Studien visar att det främst är kredit- och marknadsrisken som är kopplade till aktieindexobligationer samtidigt som risken i produkten bedöms som låg.

There are around 855 000 on-site sewage systems in Sweden and some 1 800 of these are located in the municipality of Sigtuna. The Sigtuna local authority has set the goal that all sewage systems with insufficient function should be improved before the end of year 2010. A malfunctioning on-site sewage system may cause three main problems: spreading of diseases, discharge of eutrophicating compounds and wastage of resources. The municipality strives to reduce these problems already at the stage of granting permits for installation of on site sanitation systems. The municipality has recently adopted new guidelines, which demands certain minimum reductions for different compounds. The guidelines also state that it is preferred that neighboring house-owners cooperate in jointly built and operated sewage systems and that the system should be able to recycle plant nutrients.

The aim of this thesis is benchmarking of the program, based on dynamic programming, that earlier was written to imitate the production planning at TSS.This thesis starts with a chapter about the construction of the DP-program, a shorter description of one and each of the program parts and also a list over the in- and output data in each program part. The DP-program consists of six linked MATLAB-files that together produce an optimized production plan for the different planning groups at TSS. The program reads in and reformat the given data and optimize the production of the articles in one group. Finally it compounds all article production plans and give us a production alternative.After running the program with new data the result shows, resembling with previous results, that TSS could be able to make some distinct cost-savings. According to the program, a 50 % decrease of TSS production costs is possible. .

As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.

X-ray fluorescence (XRF) detection of heavy metals is a cost- and time-effective method for investigation of polluted areas. Compared to laboratory analysis, XRF analysis is limited by high detection limits and uncertainties in some situations. Preparation of samples is known to affect the results of measurements.The purpose of this thesis is to bring a deeper understanding of how different factors affect the results of XRF-analysis. A large number of measurements have been made with the instruments Niton XLt 700 and Niton Xli 700. Results from measurements of lead, zinc and copper have been analysed.This study has shown that a greater moisture content will give a lower measured concentration for the same sample.

The purpose with this thesis work was to design and build a technical aid for installingbatteries in telecom base stations. Today that job is done manually, since there is noequipment on the market for that purpose. Installing batteries in base stations manually isa very tough job.To get ideas for possible solutions a preliminary study on existing lift aids was done.From the preliminary study the conclusion that some kind of overhead crane would besuitable for the task was drawn. After that a lift for installing batteries in base stationswas designed, built and tested. The tests show that it is possible to minimize heavy liftingwhen installing batteries in telecom base stations, at a relatively low cost.ii.

The working capital describes the short-term financial position and focus on cash flow and the actual inflow and outflow of money in the company. Working capital is part of the company's financing and consists of the company's current assets and current liabilities. There are resources that are used in the daily activity and can be optimized. The more effective they are in circulation, the higher value they create. The control of working capital is called Working Capital Management and has its basis in the company?s Working Capital Policy.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

The hydropower from Nissan River is of national interest and produces annually 230 GWh from the twelve power stations in the main flow. For modified waters a consideration between the power production and the biological values has to be made. This reports serves as a pre-study for Nissans Vattenråd. It tries to evaluate some of the biological values in the Nissan basin and map the power production in the area. And the size and value of lost power production from new fishways for the twelve stations in the main flow.The investment of new fishways is calculated using simplified templates with values from the business.

In this project, we are studying the material flow and the information flow of sample materials and the appurtenant report of deviation for the purpose to be able to suggest better solutions. The sample material, which is to be analysed, is to be continuously taken from the production flow. The purpose is to navigate the process by the results found by the analysis. Because of this, it's very important that both methods of analysis are ensured and that the sample material is representative for the production flow. However, even more importantly, is that activities and transportations, combined with both flows, must perform in a quick and correct way in order to maintain or improve Höganäs AB's competitive strength.According to reports are about 20 products per day not available, for loading, at the time of delivery.