the most obvious problem at Traction today is the in-between handling that demands much time and resources. The reason is that the packages are not designed with handling in mind. Several of the packages of today also have a poor degree of utilization that means there is room for a fewer number of articles. That in turn means more packages, more transports, more storage space and more staff. On the basis of a specification of demands ? which take quality and environmental influence, as well as transport, handling and economy in account ? we have developed suggestions on new packages that will facilitate handling and lower the total costs, The time of handling will in some cases abbreviate to just a few seconds with the new packages.

The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

Detta examensarbete handlar om hur datatrafik över en satellitlänk kan optimeras för att minska laddningstider och överförd datamängd. Syftet med studien är att undersöka i vilken omfattning datatrafik mellan fartyg och land via satellitlänk kan styras så att trafiken blir effektivare. Genom att använda DNS-mellanlagring, mellanlagring av webbsidor samt annonsblockering med pfSense som plattform har examensarbetet utfört experiment emot olika hemsidor och mätt laddningstid samt överförd datamängd. Resultatet visade att det fanns stora möjligheter att optimera nätverkstrafiken och de uppmätta resultaten visade på en minskning av datamängden med 94% och laddningstiderna med 67%..

I det här arbetet har algoritmen Simulated Annealing undersökts med avseende på dess möjlig att användas för att minimera av kostnaden för ett singelfrekvensnät för digital tv. Undersökningen är gjord genom att simulera ett antal testfall för att utreda hur olika ingående optimeringsparametrar inverkar på slutresultatet. Alla försök har genomförts i ett egenkonstruerat simuleringsverktyg, gjort i Matlab. En jämförelse av resultaten för två olika sätt att hantera täckningskraven har också gjorts, Simulated Annealing med- respektive utan straff metod. Alla genomförda försök har genererat en betydande kostnadssänkning jämfört med startkonfigurationen.

The purpose of this thesis has been to build a parameterized model of a prototype motor in the program Solidworks, to use in future optimization of aspects of effectiveness and weight. The result were two models. The first model were one minor part of the whole design in 2D, to be able to optimize and study the minor part with a faster loss simulation. The second model was the whole design in 3D. The whole model were done with the three programs Solidworks, Comsol and Matlab.

The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..

The purpose of this paper is to examine how the traditional airlines' strategies are affected by the low-cost carriers emergence and their business model and in wich ways they can achieve profitability. Furthermore we also want to examine the factors that affect the airlines' efficiency and competitiveness.The results of this study shows that the growth of the low-cost carriers have affected the network airlines' strategies as they, among other things, had to also lower their fares. This has forced them to revise their cost and efficiency in their entire operation. The result has also shown that the network companies can not come down to the same level of low costs as the low-cost carriers, and must therefore examine their ability to increase revenues instead. .

Lokala investeringsprogram was a subsidy program which supported environmental reforms during the years 1998 to 2002. The subsidies were given to Swedish municipalities. Most of the evaluations of the subsidised projects have now been completed and included in a database. The purpose with this thesis is to analyse whether the instrument has been effective with respect to carbon dioxide reductions and costs. These calculations have focused on subsidy and cost efficiency. The analysis has been compared with a previous report called "LIP ur ett samhällsekonomiskt perspektiv". The result shows that the reduction cost for one kg CO2 has been almost one SEK, which is twice as high as the cost reported in a previous report, half a SEK.

The purpose of this essay is to examine cost-benefit-analysis as a method of evaluation of labour market policy. To illustrate the possibilities and difficulties of the method chapter four contains a partial cost-benefit-analysis of the results of a labour market project in Kävlinge. The questions this essay strives to answer are the following: What possibilities and difficulties do cost-benefit-analyses entail? How would one conduct a cost-benefit-analysis of the project in Kävlinge?The method used in this essay is mainly a literature study of cost-benefit-analysis of labour market programs. The labour market project Brännpunkt is used as an example in a partial cost-benefit-analysis.The applied cost-benefit-analysis of the Brännpunkt project in Kävlinge shows that it is possible to calculate the profit for the society as a whole, given that the necessary information is obtainable.

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Folkhälsovetenskapligt program.