Introduction: The health for individuals with intellectual disabilities is asubject that is prioritized by the Swedish Institute for Public Health. Socialsupport has been proven to be important for health and quality of life. Despitethis fact there is no research available regarding the influence social support hason health and quality of life for people with intellectual disabilities in Sweden.Aim: To describe social support and the consequence of social support forhealth and quality of life for individuals with intellectual disabilities. Method:A litterature review of research in a defined area with a descriptive design.Systematic searches for articles were done in several databases and ultimately16 articles were chosen. Themes and categories were created with respect to theaim of this study during the analysis of the articles.

Title: Besparingar inom Barn- och utbildningsnämnden.Seminar date: 29th of May 2009Course: Degree thesis in Business Administration, bachelor thesisAuthors: Amela Smajlovic and Sten SundfeltAdvisor: Leif HolmbergPurpose: Our purpose is to explain the cost-saving process that many municipality organisations face because of the global financial crisis.Limitations: We have limited our study to the municipality of Landskrona and Kristianstad.Method: Our study has a qualitative approach. By using open interviews we have been able to get an open dialog with our respondents.Theory: We have compared with different theories, such as Rombach?s budget-theory and Wildavsky?s role theory.Empirics: The material is based on interviews and conversations with key figures in different levels of the organisations in Landskrona and Kristianstad.Conclusions: The success of a cost-saving process depends on the engagement, awareness and how inclined to changes the persons in the organisations are. Has everybody the willingness to take responsibility fore the organisation and the changes that the surrounding world claims?.

Introduction: The health for individuals with intellectual disabilities is asubject that is prioritized by the Swedish Institute for Public Health. Socialsupport has been proven to be important for health and quality of life. Despitethis fact there is no research available regarding the influence social support hason health and quality of life for people with intellectual disabilities in Sweden.Aim: To describe social support and the consequence of social support forhealth and quality of life for individuals with intellectual disabilities. Method:A litterature review of research in a defined area with a descriptive design.Systematic searches for articles were done in several databases and ultimately16 articles were chosen. Themes and categories were created with respect to theaim of this study during the analysis of the articles.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The conditions for a good silage process start with good wheather and choice of crop, then choice of harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.

Partnering is a collaboration method where the contractor and the client work together, based on a mutual trust towards each other and with a common goal for the project. The method originates from the United States where it was early adapted by the U.S. Army Corps of Engineers. It later spread internationally where the United Kingdom and Denmark were early in Europe to see the potential with partnering, to help aid with the issues they were having where construction projects kept running late, going over budget and lacked in quality. By using partnering you can achieve a shorter building time, improved work relationships and enhanced efficiency and cost effectiveness.