The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

The current research examined whether motives, traditional mass media consumption and individual differences (social activity and political interest) predicted the use of social media among a group of university students in China. In coherence with Uses and Gratifications assumptions the study found that the factors differentially predicted the extent of media use. Information seeking, social interaction and affinity were the main reasons for using social media. There was a negative correlation between television viewing and use of social media, in addition to a negative correlation between information seeking and use of the media. Results further suggest that social media are used to enhance social capital, since student?s being socially active offline, tend to use the media to a greater extent than those less active..

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

Due to the globalization today the competition in the market has in- creased and it requires flexibility and produce according to customer demand. In order to reduce the cost of wages industrial companies are now considering moving the manufacturing to low-cost countries. To keep up with the competition in the market without moving the manu- facturing abroad, Lean Automation was developed. The concept of Lean Automation is to reduce the perceived complexity with automa- tion and make automation available for new users and in new applica- tions.Haldex Brake Products are situated in Sweden and want to maintain the manufacturing of the automatic brake adjusters in the country. It is a product well-known and highly exposed to the competition in the mar- ket.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved and the aim of the work was to investigate the economical output of removing understorey trees before first thinning. Four treatments were studied. - no cleaning before thinning - cleaning of all trees less than DBH 5 cm before thinning - cleaning of all trees less than DBH 7 cm before thinning - cleaning of all trees less then DBH 9 cm before thinning The result shows a decrease of the cost per m3 for the harvester with about 38% if all trees less than DBH 9 cm was cleaned before thinning compared with the un-cleaned area. At the same time the total net revenue increases with about 22%. .

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

Purpose/aim: The purpose of this thesis is to examine if, and in that case how, the municipality of Umeå worked strategically with its communication during 2014 when Umeå was chosen as ?European Capital of Culture?. The research is mainly focused on the outlines of their communication plan, main goals, what  communication strategies the municipality has chosen to and their choice of media channels.Material/method: Two methods are used for this research; qualitative interviews with four employees within the communication team during Umeå2014 and a text analysis of three formal documents which provide the framework of communication policies and media strategies during Umeå2014.Results: The results clearly indicate a well structured, strategic planning outlined in the formal documents. The four people intreviewed all had a good knowledge of the policies and strategies in the documents, they also described their work in accordance with these..

The DuPont formula is one of the most well known and basic tools used for financial statement analysis and is highly useful for understanding firms strategies and operating environment. Previous studies on American listed companies have also shown that analysis of the changes in the DuPont components is useful in forecasting contexts. In this thesis we test whether disaggregating the change in return on net operating assets provides incremental information about future performance for Swedish listed and not listed companies. We find that the change in asset turnover is a leading indicator of increased profitability for both listed and private companies, regardless of size. We also find evidence that the usefulness of the disaggregation for understanding future performance is greater in capital intense industries and lesser in service industries..

This thesis work is a 30hp D-level assignment in design as a co-operation between MälardalenUniversity and Scania CV AB in Södertälje. The purpose was to develope a close fitted catwalk.The market has seen an increasing value for these types of applications and have the ambition to keep up with the rest of the competitors. The catwalks of todays standards shall be estetical attractive, have a non slippery surface and be costefficient.While working with this project I have spent a lot of time with the concept proposals and with the evaluation of the concepts, resulting in a final CAD model and a approximation of the cost estimate. The new catwalk fulfils all the new recommendations and rules as sharp edges, ADR, the height of the stepup and a non slippery surface with built in drainage..

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

Syftet med det här examensarbetet är att undersöka om det är möjligt att överföra hallbyggnadsteknik till produktion av småhus för att sänka produktionskostnaderna. Studien visar att hallbyggnadsteknik enkelt går att överföra till en villa. Dessutom blir det billigare att bygga klimatskalet med vårt byggsystem jämfört med ett traditionellt prefabricerat småhus. Genom detta system kan den totala byggkostnaden för villan i jämförelsen sänkas med 3-10 % beroende på vilket fasadmaterial som väljs..

In a time where many Asian metropolises experience an expansive development new urbanconditions are created and the already existing disappears or being replaced. Asian cities develop ata pace that is unprecedented in our history and which, through a western perspective can seemharsh. By focusing on an urban complex in Chengdu, capital of the southwestern province ofSichuan China, the study asks; is it possible to see this rapid urbanization from another perspective?The study examines the local and global dimensions of Raffels City, and how concepts such asnostalgia and authenticity, related to the city, can be understood in an urbanization that is so markedby massive demolitions. The study shows that these concepts can be expressed in several ways, andthat an awareness of them does not necessarily control the view of the city..

The intention of this thesis in political science is to understand how the European Union fights and prevents discrimination against the Roma minorities in Sweden and Romania, and how the implementation works in reality. The study consists of defining what it means to be objectively discriminated, what ethnicity really means and how the implementation process consist of a comparison and statement has been made by the national governments and comparing how two socioeconomically different member states handle EU directives and implement them in Sweden and Romania. The main findings of this study was that EU policies lack the capital and explicitness that is needed for great results to be accomplished and that the governments in both countries have different issues with implementing the protection of the human rights and Roma culture, and that EU needs to be more practical and develop in a faster pace. .