After the deregulation of the Swedish pharmacy market customers can be lost due to stock-outs. Optimization of pharmacy inventory levels has thus become increasingly important. To minimize inventory costs while considering the cost of shortages the latter must be estimated. However, the shortage cost is very difficult to compute. Thus, the aim of this paper is to estimate the pharmacy-specific shortage cost parameter and its relation to other inventory costs.

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

The purpose of this essay is to identify the costs of illness in different organizations, and compare the calculated result with the actual result in their annual reports.We collected information thru interviews with the personnel manager in the selected organizations, and used the annual reports to add necessary information.When we applied our model, we found that the selected organizations, in some cases, have a cost of illnes which is up to seven times higher than shown in their annual reports. It?s, in general, the costs that aren?t related to the salary (additional costs), which are much higher than shown.The absence of a model that calculates the costs of illnes can result in wrongful decisions. If a model would be applied in an organization, it should increase the awearness of the actual costs of illnes, which can lead to better decisions througout the whole organization.This report is written in Swedish..

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

This thesis is about new technology in academic libraries in the form of Patron Driven Acquisition. As libraries take part in the digital era, a new model of patron driven acquisition has emerged. This model gives users more influence over the libraries electronic book collection. The collection development model changes libraries traditional role in the collection development process, from collecting for the future to the present.The purpose of this thesis is to gain knowledge of what acquisition librarians think about the effects of PDA on the collection, the acquisitions role and the cost structure. The theoretical framework relies on Christensen?s theory about disruptive technology and was used to interpret outcomes of new technology in libraries and its staff.Five librarians from four different Swedish university libraries were interviewed using a qualitative semi-structured method to carry out the investigative part of this thesis.

The purpose of this master thesis is to map and analyze the appropriate valuation approaches used for Intellectual Property rights and develope a model for valuing patents. This project has been executed on behalf of Electrolux?s Group Intellectual Property and is intended to be used for managerial purposes.Project limitations include patents that doesent concern technology oriented products and services, real option methods, financial forecasts, decisions concerning patents taken by the R&D division, patent applications in general and taking into account unexpected future management decisions regarding patents.Electrolux?s Intellextual Property team applies, manages and protects the groups Intellectual Property rights including patents, designs and trademarks. With an increased globalization and the rise of emerging markets, incentives have increased further to protect and safeguard the group?s innovations.Mainly there are three different valuations approaches for valuing intellectual property rights, these include the income based approach, cost base approach and market based approach.

the most obvious problem at Traction today is the in-between handling that demands much time and resources. The reason is that the packages are not designed with handling in mind. Several of the packages of today also have a poor degree of utilization that means there is room for a fewer number of articles. That in turn means more packages, more transports, more storage space and more staff. On the basis of a specification of demands ? which take quality and environmental influence, as well as transport, handling and economy in account ? we have developed suggestions on new packages that will facilitate handling and lower the total costs, The time of handling will in some cases abbreviate to just a few seconds with the new packages.

The thesis deals with three document retrieval models based on logic: the Boolean model,the fuzzy model and the Van Rijsbergen model.In Chapter 1, the author presents the purpose of the thesis. This is to give the logical foundationof the models, to describe them and to examine them critically. In Chapter 2, some importantnotions in document retrieval are presented. Chapter 3 is devoted to the Boolean model, Chapter4 to the fuzzy model and Chapter 5 to the Van Rijsbergen model.These three chapters are organized in the same way. First, the logical foundation of the modelis given.

Projects is the most common work model within the cultural area, but what is a cultural project? The definition of cultural projects is ambiguous. There are also no compiled information about what it means for culture to be pursued in project form. Scientific research about traditional project management and success criterias are wide-ranging. So is the scientific research about cultural studies and cultural policy.

Rimaster Kisa AB is a member of the Rimaster Group, the corporation was bought from Samhall AB in January 2007. The corporation is producing mechanichs needed by the Rimaster group as well for external costumers. Samhall AB is now functioning as a provider of labor for Rimaster Kisa, as the company is hiring personnel from Samhall AB. The company has earlier have had problems with their lead times being far too long. This has resulted in that the management decided to invest in a new edging press.

The purpose of the thesis is to compare Sweden's and Great Britain's total costs for their systems regulating producer responsibility for waste packages. Producer resonsibility is a strategy implying that producers are responsible for their waste also after its use. Sweden and Great Britain introduced different systems systems after an EU directive was adopted in 1994 (94/62/EC), and they have resulted in entirely different recycling levels in the two countries. In the Swedish system, responsibility has been delegated to the industry who are responsible for reaching the determined goals. The economic instrument used is a fee, set and managed by the industry. The British system is more centrilised, and the economic instrument used to finance recycling of waste is a system based on transferable permits. The thesis compares the four different alternatives: delegated and centralised methods, and fees and transferable permits analytically.

The Stockholm office market segment have for a long time been considered a safe havenwhen it comes to withstand negative turmoil in the form of rental compression due toeconomic fluctuation, especially in the CBD demographic. Recently however, a large numberof banks and institutions, amounting to some 200000 square meters, have decided to relocateto more peripheral locations with the aim of cost reductions on rent. This mass exodus isstudied with focus on rental dynamics as the result of increased vacancies. Other variables arestock changes and employment. The method is econometric combined with an interviewseries.

Performance of an intersection affects the total travel time in a traffic network. An intersection with good performance can easily be described by its contribution to lower travel time than in a comparable intersection. The travel time is of importance in the cost calculations when a specific intersection is to be chosen and designed. It is important to be able to make correct and precise performance calculations so that the cost calculations will not be incorrect. For that purpose the software Capcal, which is a traffic model for intersection analysis on performance, is used in Sweden.

Evaluating and choosing suppliers based on price alone, has traditionally been the dominant strategy for supplier selection within the purchasing function. With the origin of the Total Cost of Ownership (TCO)-concept in the early 1990s, a new philosophy dawned that promoted the importance of knowing the effects of supplier performance on the buying firm?s internal costs. Since then, scholars have been arguing the case of TCO as a viable model for making purchasing decisions and conducting supplier evaluation. Still, after two decades little is known about its penetration and impact on the practices of buying corporations, leaving the questions of which costs are included in the purchasing organisations? decisions unanswered, and even more importantly why certain costs are considered and others not.

The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..