Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

This paper studies the research foundations created in 1994 from the former wage earners? funds out of a portfolio management point of view. Firstly it describes the seven largest foundations and their different portfolio management structures. Secondly it analyses the performance of these foundations measured as the intercept, Jensen?s a, in a linear regression of the excess returns of a portfolio versus a proxy for the market, as well as the Sharpe-ratio.

The 26th of February 2009 the Swedish government gave a referral to the council of lawregarding the removal of a law concerning mandatory membership at a student union andstudent nation while studying at a university or college in Sweden. This has led to adiscussion amongst the student nations in Uppsala as to how this proposed change will affectthe nations? future operations. Some, including the chairwoman for Kuratorskonventet,Therez Olsson, and the 1Q for Norrland?s student nation, Jon Stridh, have expressed theirworries that this could lead to a decrease in members.

Servera R&S AB is Sweden?s largest wholesale company within the restaurant and food service industry. Servera R&S AB is the daughter company to Axel Johnson AB, which in turn is a part of the Axel Johnson Group with Antonia Ax:son Johnson as the owner. Servera is a nation wide company with a business concept of offering a complete selection of merchandise and services to the professional food service market. The company is split into for different regions: the north region, the middle region, the southwest region, and the southeast region and has its headquarter in Stockholm.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

This thesis approaches the problem of estimating the arm angles of an industrial robot with flexibilities in joints and links. Due to cost-cutting efforts in the industrial robots industry, weaker components and more cost-effective structures have been introduced which in turn has led to problems with flexibilities, nonlinearities and friction. In order to handle these challenging dynamic problems and achieve high accuracy this study introduces state observers to estimate the tool position.The observers use measurements of the motor angles and an accelerometer and the different evaluated observers are based on an Extended Kalman Filter and a deterministic variant. They have been evaluated in experiments on an industrial robot with two degrees of freedom. The experimental verification shows that the state estimates can be highly accurate for medium frequency motions, ranging from 3-30Hz.

I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.

The Swedish agricultural sector is currently undergoing a substantial structural change. The number of farm enterprises is continuously decreasing and the average farm size is increasing. In combination with increasing number of competitors in the insurance market, the competitive rivalry within this market has increased significantly. With this knowledge in mind, Länsförsäkringar Uppsala initiated this study, which aims to provide an understanding of customer?s view on customer value, related to agricultural insurance and financing.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The purpose of this study is to analyse and describe social work students? view on a person with self-injurious behaviour and the following issues. The aim and focus is on the general depiction. The theoretical perspectives have been intersectionality and its focus on social constructivism, and gender perspectives. The method was semi-structured interviews with eight social work students at Linnaeus University Kalmar.

The payment for produced grain is constantly going down in price. It is important for farmers to become more effective in cultivating more land in a shorter time perspective. At the same time we have to calculate with the risk of getting lowered subsidies from the EU. This is why I would like to find out the possibilities for establishing winter wheat without ploughing. I hope to find a difference in the number of plants due to different soil preparations. With this experiment I expect to find out whether I can establish winter wheat at a lower cost, with the same numbers of plants per square meter.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.