The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.

The aim of my study is to answer the question whether there is a potential for services by working horses in the Swedish municipalities. The Swedish University for Agricultural Sciences (SLU) and Swedish Farmers Union (LRF) has started a cooperation called Climate School (Klimatskolan), with the purpose to increase knowledge in environmental and climate related issues in context of agriculture. This Master thesis is in the framework of the Climate School.Global warming is a problem that gets much attention today. Global warming and climate change are two subjects that are very much in focus on the political agenda. The municipalities of Sweden have a big responsibility concerning environmental work and to develop their own environmental thinking.

Previous research in the field of consumer marketing has confirmed the positive effects of divergence on advertising efficiency. Despite the coherent evidence, some industries lag in the adoption of these findings, one of which is the Swedish real estate market. Divergence has not been elaborately investigated within said context and this paper addresses the need of actionable insights for housing advertising. Starting with the proven success of housing firm Fantastic Frank who work with detail photos in contrast to the common wide angle, this paper examines theoretical implications of detail photos' characteristics. Besides being divergent, detail photos are also ambiguous which renders access to effects related to visual perception.

Specialarbete, 15 hpSvenska som andraspråk, SIS 133VT 2012 Handledare: Håkan Jansson.

Bakgrund: Det har visat sig att det i många fall kan vara svårt att jämföra kalkylinformation mellan likartade enheter trots att dessa använder sig av samma kalkyleringsmetoder, särskilt om enheterna i fråga är geografiskt placerade i regioner med olika kalkyleringstraditioner. Det är därför av intresse att undersöka hur kalkylinformationen kan skilja sig åt i dessa fall. Syfte: Syftet är att analysera försäljningsomkostnader med hänseende på deras urval och värdering i kalkyler. Genomförande: Vi har genomfört en casestudie med intervjuer med tre enhetschefer i den svenska divisionen samt med tre engelska chefer för motsvarande enheter i den brittiska divisionen inom en och samma globala koncern. Resultat: Vi finner i vår studie att kalkyltraditioner spelar en stor roll för vad kalkylinformationen visar, men att det även förekommer stora skillnader mellan enheter som har samma kalkyltradition.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

Background and problem: The background to this study is the organizations increased difficulty to retain employees in the organization when more and more employees today choose to do their career in several organizations. The problem to keep the employees in the organization leads to several problems where the loss of experience reduces efficiency and increased risks and cost associated with recruitment are some problems that arise. The problem therefore faced for this study is: How can opportunities for career development within an organization created to get employees to stay over time?Purpose and method: The purpose for this study is to describe how organizations can create opportunities for the development of career that gets employees to stay within the same organization and make their career in this organization. The method used for this study is a qualitative approach where data is collected through semi-structured interviews in a case study.Empiricism: The empirical result have shown there are four factors that an organization should overhaul to create an opportunity for the development of a career that gets employees to stay in an organization over time.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

An important task for Region Skåne is to allocate resources to the health care districts. From 1999 to 2002 Region Skåne used needs-based resource allocation as a model for allocating resources. In a needs-based resource allocation individuals with the same socioeconomic and demographic characteristics are assumed to have the same level of need and are therefore allocated the same amount of resources. During the period of needs-based resource allocation a matrix model was used as a method. In the matrix model individuals were divided into cells after each combination of the socioeconomic and demographic variables.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

Today there are a big need for a system that delivers overview of all available units for different municipalities and shipping- and security companies due to the increasing requirements for efficiency. The purpose with this graduation thesis is to find out which systems that is suitable to use while developing cost-effective software for positioning and to produce a prototype for such solution.This assignment has been done at the request of PocketMobile Communications AB. PocketMobile is a company that are specialized on delivering modern mobile software solutions and systems to companies with their own vehicle fleet or mobile workers.This master thesis can be split into two separate parts, the theoretic- and the practical part.The theoretic part includes producing a number of functional requirements in cooperation with PocketMobile and comparing the available systems against the function requirements.The practical part deal with the development of a prototype that demonstrates the software recommended. The development tools that best matched the functionality requirements when the selection was made in May 2007 were Map24 and OpenLayers. The system that was selected to use while developing the prototype was Map24, because this product matches all of the requirements and it is also suited for professional usage regarding support, scalability and reliability.