The purpose of this work was to see if it was possible to rebuild an old dairy house into a house fore sheep production. The goals fore the work was to see witch kind of production model was suitable, how the actual drawing would look like and witch kind of interior was needed. The building was built in the beginning of 1900. It is located on the mountain Kinnekulle in Sweden. It was a big production fore its time and hade about 60 dairy cows. It was a lot of hard work because the floor was built by big stone blocks and it was very hard to rebuild when some more automatic solutions came fore handling all the manure. The idea of remaking the building came when we rebuilt the roof fore 5 years ago.

Accounting for financial instruments can either be based on a transactions approach or an eco-nomic approach. Under a transactions approach instruments are reported at cost whereas under an economic approach instruments are reported at fair value. Hence, under a transactions approach realization becomes a criterion for recognizing fair value fluctuations as revenue whereas under an economic approach it does not. A mixed model is defined as a combination of the transactions approach and the economic approach insofar it records some accounting items at cost and other items at fair value. The mixed model gives rise to an issue commonly referred to as an accounting mismatch.

Higher demands of competitiveness and efficiency have led to increasing sizes of farms, with more land, more capital and more comprehensive logistics. The aim is to gain benefits of scale economies that reduce the production cost per unit. However, a greater extent of the business exposes the farm of increased risk where small deviations rapidly can erase the benefits. A modern dairy farm thus put high demands on the farmer?s ability to coordinate, plan and manage the forage production through the whole process until storage to obtain silage of the desired quality and quantity at the right price. The objective of this study was to design a simple model, i.e.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

Performance of an intersection affects the total travel time in a traffic network. An intersection with good performance can easily be described by its contribution to lower travel time than in a comparable intersection. The travel time is of importance in the Cost calculations when a specific intersection is to be chosen and designed. It is important to be able to make correct and precise performance calculations so that the Cost calculations will not be incorrect. For that purpose the software Capcal, which is a traffic model for intersection analysis on performance, is used in Sweden.

The financial crisis in 2008, effected companies around the globe and forced them to change their operational strategies, in order to survive. Companies with international links needed to consider external effects and due to that adapt their strategies on a global level. Demands for goods and service were decreasing and companies could only manage the cost during a recession to not face bankruptcy. Organisations need to reconsider their optimal strategy as this will determine their future outcome when managing a crisis as the one in 2008. British Airways - Air Cargo is a global company with an international network which serves about 80 countries, with about 200 destinations.

Title:Change strategies in the transition towards a cashless banking systemLevel:Final assignment for Bachelor Degree in Business AdministrationAuthor:Elin Lånström och Vildana SmailagicSupervisor:Stig SörlingDate:August 2013Aim:In our study, we compare what it is that drives a bank to implement changes in their business, what problems these changes may bring, and how organizations deal with these. We do this by studying how different banks choose to relate to the handling of cash.The questions we ask ourselves are:? What lies behind the decision to make changes in cash management?? How is the change implemented in practice?? What do banks think this change will mean for the future?Method:The study was conducted with the help of a qualitative scientific method. We conducted interviews with representatives of four banks, and made use of secondary data in the form of scientific literature and scientific articles.Result & Conclusions:Organizations implement changes in order to adapt and achieve balance with their environment but also within the organization itself. Our study shows that the decision to introduce cashless branches is mainly a result of banks' efforts to become more cost efficient.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

The purpose of this study is to examine the effects of joint venture announcements on stock prices behavior and simultaneously to test the German stock market (Frankfurter Wertpapierbörse) for efficiency. We tried not only to analyze the general impacts of a JV-announcement but also to look for differences in the market response to announcements of different types of joint ventures, namely: domestic, international, horizontal and vertical. Our expectations of efficient market were confirmed during our paper, which employed the technique of the standard event study. The calculation of abnormal returns which are the signals for market efficiency or inefficiency respectively were based on the market model, establishing linear relationship between the return on the market and the return on an individual security. The parameters of the model were obtained through regression analysis..

The lack of fresh and clean water today causes severe problems, mostly in developing countries. Waterborne diseases like typhoid, cholera, amoebic dysentery and diarrhea create health problems and deaths among people. There is a need for low cost interventions like household-based water treatment and safe storage (HWTS). Solvatten AB is a Swedish company based in Stockholm. Their product, Solvatten, is a household water treatment unit that can treat water containing viruses, parasites and bacteria.

The purpose of this project has been to cut production costs for the fascia panels ofGetinge?s largest autoclaves. The cost for the stainless steel plates currently used is veryhigh. An alternative material solution could cut costs significantly.In addition, improvements have been made to the instrument tower which is a central partof the fascia panel. As a result of the new modular design in a new material theinstrument tower has been improved in several aspects..

The agricultural sector accounts for about 13 percent of the total load of greenhouse gas emissions from Sweden (Swedish Environmental Protection Agency, 2007). The Swedish objective to reduce the greenhouse gas emissions with 40 percentage units to the year of 2020, based upon the year of 1990, might imply stricter regulations for Swedish farmers. A regulation or other forms of economic incentives is probably necessary to reduce the emissions originating from the agricultural sector. This study aims to investigate the economic and managerial impact on two agricultural firms with differing production system given that a constraint on green house gas emissions is introduced. Gases included in this study are carbon dioxide, methane and nitrous oxide.

Title: Competition for small audit firms ? a qualitative study on possible competitive strategies and how the upcoming changes will influence competition on the audit market    Subject: Auditing Tutor: Margareta Paulsson  Authors: Per Dahlström and Martin Holmberg Purpose: The purpose of this study is to develop an understanding how smaller auditing firms use competitive strategies and why. The result aims to work as a support for owners and leaders of audit firms as they make decisions of how to compete in the future. We would also like to explore how smaller audit firms view the change of the mandatory audit, that is, our intentions are also to examine how they think the consequences on the market will be and their view on its affect on the competition of the market.    Methodology: Our methodological approach was characterized by a hermeneutic approach in order to explain and understand why the smaller audit firms do what they do. Our approach is a combination of inductive and deductive as it allows us to develop an understanding of the subject, then gather our empirical data and from that draw valid conclusions.

This master thesis is performed at Scania Axles and Gearboxes, a production plant located in Södertälje. Within the plant axles, gearboxes as well as central gears are assembled from components to finished products. All production is conducted on production lines, with a pre-determined rate, which is supplied with components by the material handling department. Since the production quantity and the mix of product variants produced on the production line is customer order-based, the number and type of components needed for production as well as appropriate staffing within the material handling department is difficult to predict. Scania is currently using a number of different resource planning tools for each material handling-department within Axles and Gearboxes to visualize the workload within the departments.