Östgöta Brandstodsbolag started its insurance business in 1841 and is today a part of Länsförsäkringsgruppen, which consists of 24 independent and locally anchored county insurance companies. The local concept is a condition for the county insurance (länsförsäkring) idea, which means that the 24 county insurance companies cooperate freely. Länsförsäkringar is the market leader within property and liability insurances in Sweden and has a market share of 30.5%. The largest, and most well known, insurance companies in Sweden, apart from Länsförsäkringar, are If, Trygg-Hansa and Folksam. This essay treats with Östgöta Brandstodsbolag, which is one of Sweden's largest county insurance companies. The company is active in the county of Östergötland where it has the dominant market shares within home, detached houses, car and farming.

The aim of this report is to develop an improved basis for calculation of common costs as well as to create a support, showing which steps can be taken for improving the future monitoring at NCC Hus in Karlstad.The objective of this report is to improve the quality of the process of quoting by verifying current key numbers, production of new key numbers and to identify the problems affecting the monitoring of projects.The objective is also to provide suggestions of actions improving quality assurance at NCC Hus in Karlstad..

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

Purpose: The purpose of this study is to increase the understanding of how a bank?s features and internal factors have affected its choice of method in calculating the capital requirement.Theoretical and Empirical Method: The research strategy of this study has been of a qualitative nature with a deductive approach. The choice of method was depth interviews with respondents from a targeted sample of Swedish banks. These respondents were chosen based on the knowledge they possess as key employees in the capital requirement process and their involvement in choosing their banks? method for calculating the capital requirement.

Antalet flygresor har ökat markant i världen de senaste decennierna. Detta har medfört en ökning av flygets koldioxidutsläpp som därmed har gett en ökad påverkan på klimatet. Forskning angående människors syn på och uppfattning om flyget är relativt ny och forskning rörande ämnet är mer förekommande idag än för ett decennium sedan. Tidigare undersökningar är dock i stort sett eniga om att människor, både miljömedvetna och icke-miljömedvetna personer, inte tänker ändra på sina flygvanor och flyga mindre på grund av flygets klimatpåverkan. Denna studie undersöker klimatengagerade personers flygvanor och vad de har för syn på flyget och flygets påverkan på klimatet.

The increase of complexity in embedded programming is forcing the development of higher level programminglanguages. These languages not only consist of traditional text based programming but also with graphical programminglanguages such as the programming language G from LabVIEW which is developed by National Instruments and havebeen around since the mid eighties. However since 2004 this language has also been able to program embeddedhardware, using the modules LabVIEW SDK and LabVIEW for ARM. This thesis shows how LabVIEW for ARM converts itsgraphical language G to C and then how C is flashed into the microprocessor. The thesis also takes up the pros and consof using G for embedded development.

This master thesis is an in-depth study of an existing heating system at a household cooperative in Uppsala that has been converted from district heating to a bedrock heat pump system. The study focuses on an economical system optimisation of the building?s complete heating system. The aim was to determine how well a heat pump system in large buildings actually work, find out possible ways to optimize the existing system and point out important system parameters for new heat pump installations in larger buildings.The project points out a possible energy cost reduction of 45 % without investment and further cost reductions with equipment investments. A reduction by 30 % is possible by improvements in the regulation system and 15 % is possible by maintaining the brine system.

Sustainability reports have during the last decade had a strong development. Both in terms of establishing a sustainability assurance, in its form, and get it assured together with standards, principles and regulations which organisations and accountants have utilized. The growth of sustainability reports and the choice of getting them assured have in particular favoured the accounting business. Due to this result, some critics have voiced that assuring a sustainability report gain accounting firms more than it gains the actual organisation. Other say that it is necessary in order to increase the credibility and the eligibility of the report, while it also has become a requirement from stakeholders.

The cost for forestry logistics in Sweden is about 25 percent of the total cost of getting the raw material to industry (Anon., 2010). There might be much to gain by taking a look at your supply chains on the logistic side in your company. In this report the logistic chains by Mellanskog for ENA Energi AB in Enköping has been looked in to. ENA Energis plant is a combined power and heating plant and about 99, 5 percent of their fuel consisted of bio energy in year 2009 (ENA Energi, 2011, länk A). The main purpose with this report is to look at three questions: 1. How does the supply chain look today? From forest to industry. 2.

During the period 2009-2013, investments in the Swedish national grid increase by a factor of ten compared to previous years. In order to fulfil their mission to manage the national grid in a safe, efficient and environmentally sound way, Svenska Kraftnät (Swedish National Grid) needs to take all these perspectives into account while planning new investments. To compare and relate perspectives of technology, economy and environment the same yard stick must be used. That yard stick is commonly money. A problem arises however as environmental issues are difficult to price.The purpose of this master?s degree project was to develop a tool for evaluation of environmental impact related to investments in the Swedish national grid.

This thesis deals with numerical simulation of earth pressure against tubular bridges in the software Plaxis. Plaxis is a FEM (Finite Element Method) software based on numerical calculations for which approximate solutions are developed through an iterative process. The program is specifically designed for soil and rock mechanical tests, such as voltage and deformation calculations in soil.The Royal Institute of Technology conducted in 2005, field tests on tubular bridges of corrugated steel, which was part of Ersa Bayoglu Fleners PhD (Bayoglu Flener, 2009). She studied how two different tubular bridges deformed during installation and filling. Tests and measurements were made during filling.

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.

The aim of my study is to answer the question whether there is a potential for services by working horses in the Swedish municipalities. The Swedish University for Agricultural Sciences (SLU) and Swedish Farmers Union (LRF) has started a cooperation called Climate School (Klimatskolan), with the purpose to increase knowledge in environmental and climate related issues in context of agriculture. This Master thesis is in the framework of the Climate School.Global warming is a problem that gets much attention today. Global warming and climate change are two subjects that are very much in focus on the political agenda. The municipalities of Sweden have a big responsibility concerning environmental work and to develop their own environmental thinking.

Specialarbete, 15 hpSvenska som andraspråk, SIS 133VT 2012 Handledare: Håkan Jansson.