A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

This dissertation deals with two sports clubs and their operational development between the years 1946-1998. The research was made by a qualitative analysis of the annual reports and protocols that the clubs produced between 1946-1998. The two clubs are IFK Växjö and Växjö BK which are located in Växjö in Sweden. Our main purpose with this study was to analyze the operational development and in which way elitist drive affects the voluntary society content and culture. Results indicated that if a sports club starts with elitist sport it could have a bad impact on the voluntary sector.

Ett effektivt industriellt bostadsbyggande i trä bygger på kontrollerade och standardiserade processflöden. För att visa på vilket sätt de har ett samband, har grundläggande kunskaper om proceskartläggning och processbaserad verksamhetsutveckling använts. Processen kan sedan effektiviseras och utvecklas för att i framtiden göra det industriella bostadsbyggandet ännu mer framgångsrikt. Vilket kan gynna träbyggandet både i Sverige och internationellt. Syftet med examensarbetet är att kartlägga företaget Plusshus arbetssätt från ide till färdigt hus och sedan upprätta ett förslag på en hållbar standardiserad processmodell.

The feed is a major cost in the dairy production and there is a constant interest in findingalternative cost-effective feedstuffs. Competitive dairy producers have to seek ways todecrease their production costs and the pursuit of cost-effective feed rations contributesto lower costs of production. An interesting group of protein concentrates are rapeseedproducts like ExPro (heat treated rapeseed) which have during the autumn 2008 andspring 2009 been very favourable compared to other protein feeds.This study focuses on the feedstuff products ExPro and Raps-Drank 60/40 (rapeseeddistillersgrain). The potential use of ExPro in dairy cow feed rations are also explored.ExPro is a well known feedstuff but Raps-Drank 60/40 is a relatively new product andnot known for many farmers.A field study on the use of rapeseed products was made on a limited number of dairyfarms. The main purpose was to study the management of the feedstuffs on the farms.The Farms were selected in cooperation with two local extension services.

Distrilux International AB, a company within the Electrolux-group, works among other things with storing of products from other companies in the Electrolux-group. This rapport contains a cost analysis of the two Distrilux warehouses in Motala and Mariestad. The company offers five services in these warehouses, in-loading of products from a local factory and from external factories, storing, out-loading of products to Sweden (domestic) and for export. Since there has been some hesitation of the accuracy of the price-model of today, a master's thesis has been advertised. The purpose of the thesis has been to investigate the agreement of the price-model of today and the apportionment of the costing in warehouses.The main problem is to determine which activities is to be considered important in the price-model.

I denna uppsats studeras investeringsprocesser i det divisionaliserade företaget Södra Skogsägarna ekonomisk förening. Studiens syfte är att beskriva och förklara företagets investeringsprocesser och i vilken utsträckning dessa processer är standardiserade. I studien analyseras dessa investeringsprocesser utifrån befintlig teori. Studien visar att investeringsprocesser initieras i den operativa verksamheten för att sedan drivas fram i den operativa verksamheten och i ledningen på enhetsnivå. Beslut fattas på alla nivåer i företaget efter investeringars storlek.

In our thesis we will compare interior walls, both bearing and non-bearing. All of thewalls analyzed are currently used in production by Skanska Construction, who is alsoour employer/supervisor for the project. The different wall types will be comparedfocusing mainly on time, cost and workability. All of these walls aside from the nonbearingwall are constructed using concrete, either prefabricated or cast on site..

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

Costs of maintenance on agriculture machines is something that many farmers has a low knowledge of, it can depend on low interest or that the farmer don?t have enough time. To make it easier for the farmers they can use many computer programs which are available on the market. In this program they can calculate their costs of maintaince on their agriculture machines, for example STANK and JTI machine calculation program. Most of this program is using Svensson (1987) costs model whish was made in Sweden in the middle of 80 decade in a large study.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.