This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

This paper analyses education regarding its profitability from an individual?s perspective. The method for conducting the analysis is an ex ante cost-benefit analysis and the time period examined is between the days the education begins until retirement age. The conclusions of this paper are that tertiary education is not profitable for an individual given the conditions stated in this examination. Furthermore the longer the education lasts, the more unprofitable it is.

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

This report concerns the for Sweden foreign tree species hybrid larch, hybrid aspen and poplar, and focuses on the area Kalmar and Mönsterås municipalities. The report shows that there are not only advantages with these species. The larch, the most common of the alien tree species has the greatest problems due to that its timber is difficult to sell in the area but also the Larch´s poor pulp quality and is more likely to be damaged by wildlife than the spruce is. Hybrid Aspen is much easier to sell and is used like regular aspen for match wood and textile pulp. Its disadvantage is the high cost for plants and to prevent damage from wildlife.

Tidigare forskning har undersökt effekterna av etiskt ledarskap på redovisningsbeslut och etiska riktlinjers allmänna påverkan, men vi saknar forskning kring variablernas gemensamma påverkan på redovisningsbeslut, vilket är syftet med detta arbete. Arbetet undersöker vilken effekt etiskt ledarskap och etiska riktlinjer har när en redovisningskonsult ställs inför en komplicerad redovisningsfråga. Variablerna undersöks både individuellt och tillsammans. En enkätundersökning genomfördes bland auktoriserade redovisningskonsulter i Sverige och 142 respondenter deltog. Studien tyder på att det finns ett gemensamt inflytande av etiskt ledarskap och etiska riktlinjer på etiskt laddade redovisningsbeslut.

In modern society globalisation is a fact within all industries, the textile industry included. Due to improvement in areas such as logistics and communication international trade have developed fast. As changes occur rapidly on the global market and companies must adjust and revise their processes in order to stay competitive.Because of the global price reduction consumers around the world expect low-price products, which mean that the companies have to find new ways to produce in a cost-efficient way. To maximize profit most of the textile production is situated in low-cost countries due to its labour-intensive character. It is crucial for fashion companies to allocate their activities in their value-chain effectively in order to reduce lead-times.

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

The purpose of this study was to gain a better understanding of how medium-sized construction companies adapt and how they choose to reorganize their operations in relation to the recession. The study has as its theoretical starting point theories about organizational learning, the impact of the economy on construction companies and strategies for dealing with recessions. The method used to conduct the study was semi-structured interviews with representatives from 15 different construction companies. The results of the study show that they used several strategies to adapt and reorganize the business in accordance with the recession. Some construction companies had to make cost savings as a result of the recession.

Compared with a few years ago, the cost of concentrates has increased substantially and because of that an increased proportion of pasture is of interest. Pasture is cheap and the farmer does not have to harvest when the cows do it themselves by grazing. This saves both money and time. According to research milk yield decrease with an increasing proportion of pasture in the diet. This is because cows on pasture will have lower dry matter intake than cows with supplements.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

During the last decennium climate issues have become more and more important. Many steps towards an adaption of efficient energy supply systems have been taken all around the world. These steps have been created to ensure the next generation?s energy demand. In EU and Sweden objectives have been set to ensure that the energy consumption decreases by 20% year 2020 and by 50% year 2050 compared with the energy consumption levels of year 1995.

Redovisningen av kundfordringar är komplex. Posten är förhållandevis svår att värdera och en felaktig värdering kan förvränga företagets finansiella ställningar. IAS 1 p.9 har ett fåtal regler som uppfattas som vaga för redovisning av kundfordringar vilket gör att skillnaderna ökar. Framförallt öppnas det upp utrymmen för manipulation av redovisningen.Syftet med studien är att ge en bättre förståelse av hur kundfordringar redovisas och att tolka och analysera hur upplysningar av redovisningsmetoder i årsredovisningar underlättar förståelsen av innehållet i rapporteringar. För att syftet ska uppnås studerades 24 företag.Studien visade att även fast alla undersökta företag är börsnoterade (på large cap OMXS30) så råder det stora skillnader i deras disclosure av information kring tillämpande redovisningsmetoder.

Since 1987 until November 2010, the entrepreneurs who choose to conduct its? company in the Swedish corporate form aktiebolag had no opportunity to evade or deselect the mandatory audit. The only choice that really was there to make was to which audit firm they would turn to and the Swedish auditor?s position was rather unchallenged. Today the circumstances are different and the small businesses have been given a chance to take charge of their own situation now being able to remove the auditor.

The purpose of this of this essay is to explore the construction of a conservatory that is livable allyear around. When you build a conservatory there are several factors that need to be regardedthat usually are of no importance when you build a regular conservatory. The glassed facadeneeds to have a very good U-value and all the parts of the facade need to be isolated and theconstruction needs to prevent thermal bridges.In this essay we will start by looking at the shape of the conservatory. Due to the façade consistsof glass the conservatory will need to have a good ratio between the area and the façade so thatthe heat losses will be at a minimum. However, due to the fact that one of the sides of the façadeis connected to the warm house, you quickly realize that the shape of the conservatory is of noimportance.There are two common ways to build a foundation for a conservatory, a molded concretefoundation and isolated wooden beams.