Bakgrund: Fetma är ett folkhälsoproblem som har ökat dramatiskt de senaste två decennierna. För att behandla extrem fetma har magsäcksoperationer blivit en allt mer vanlig metod. De hälsoekonomiska aspekterna av operation har ännu inte studerats i Sverige. Syfte: Studiens syfte var att belysa hälsoekonomiska aspekter av magsäcksoperationer som intervention mot fetma. Metod: Metoden var en litteraturstudie.

Purpose: We will understand and explain Dell?s value gap through an extended intellectual capital theory. This will be done by deriving the value to the different parts of the intellectual capital value scheme. We will also use value scheme to describe the ongoing strategy shift. Methodology: The qualitative method and an abductive reasoning have been employed during the progress.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

With the days DGPS-technology can a position of 5 centimetres decides. With this exactly position is the technology very interesting for the agriculture. I think this technology can come more and more in the future. You can also move the fact and information further to the spreader, sprayer and seeders. If the combine is equipped with harvest accounting, can you with help of the system make harvest maps.

The economic prerequisite to many farmers in Sweden after the EU membership and the new agriculture policy has generated large demands on the farm management. Until year 2004 you got a grant based on what you had produced and not on consumer demand. In 2005 a new economic aid (Mid Term Revue) was introduced and the conditions has changed again. Due to this I have chosen to do a cost-benefit analysis on a case, to investigate if the present production is sustainable in the future. My conclusion is that the profitability is acceptable even if the farm has a high debt. But to make the production more profitable the products produced should be refined as much as possible at the farm, to get maximum economic return.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Titel: Intäktsredovisningens nya form - En förstudie i hur de nya reglerna för intäktsredovisning tros påverka finansiell information från entreprenadföretag Bakgrund och problem: Intäkter utgör oftast den största och mest relevanta posten när det kommer till företags redovisning. De regler och regelverk som styr intäktsredovisningen har det senaste decenniet diskuterats flitigt. Detta dels för att intäktsposten och dess redovisning har varit i centrum för ett antal redovisningsskandaler, dels för att reglerna inte är harmoniserade och för svåra att tillämpa. Problematik har lett till ett konvergeringsprojekt mellan de två stora normsättarna International Accounting Standards Board och Financial Accounting Standards Board som nu under andra halvåret av 2013 kommer presenter ett nytt regelverk gällande intäktsredovisningen. Syfte: Syftet med denna studie är att undersöka hur intäktsredovisningen för entreprenadföretag fungerar, samt att ge en inblick i hur de nya reglerna kring intäktsredovisningen tros komma att påverka företag i entreprenadbranschen. Vidare syftar uppsatsen till att undersöka hur redovisningsexperter tror att de nya reglerna kommer påverka möjligheten för externa intressenter att få en rättvisande bild av företagen. Metod: Studien tillämpar en kvalitativ metod där sammantaget fyra respondenter intervjuats genom en semistrukturerad intervjumodell.

The aim of this empirical study was to investigate how nurses on a ward within the emergency clinic deal with analgesia prescriptions and the pain management documentation. The used method was divided into chart reviews and qualitative interviews with nurses in clinical practice at the ward. This means that both a qualitative and quantitative approach was desired. The results incline that nurses generally apply to the laws and restrictions surrounding the nursing discipline, as used in pain treatment. Thus they generally fulfill the obligations accounting to documentation.

The cost of transportation has strongly increased in the recent years, transportations which are a major part for the construction companies. Skanska Asphalt which is a part of Skanska Sverige AB has noticed that there are significant cost savings to be made with the purchasing of transports. The transports in this case is about asphalt, where the costs are about 10% of the outsourcing business turnover. The purpose of this thesis is to study the working practice that Skanska Asphalt are using today in controlling and time-writing, for the asphalt transportations. Resulting in recommendations on how to improve the working practice at Skanska Asphalt.This study was conducted with the help of a number of interviews with Skanska?s employees and with suppliers of transportation to describe the practices which are being used in during the asphalt transportation.

AbstractToday, too many construction projects are delayed and deviates from the budget. Agood project management is the basis for successful construction project. The mostcommon planning methods in the construction industry is currently Gantt chart andCPM. The problem with these is that focus is only at the time of the project anddoesn?t handle the budget.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.

In order for a judgement to be enforceable in another Member State, there is a certain requirement for an "intermediate? court procedure, a so-called exequatur procedure. An exequatur procedure is both expensive and time-consuming. The average cost of the procedure within the EU is 2 200 euro in a case without particular difficulties. In more complex cases, the cost of the procedure can be validated up to 12 700 euro.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.