In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

Antalet flygresor har ökat markant i världen de senaste decennierna. Detta har medfört en ökning av flygets koldioxidutsläpp som därmed har gett en ökad påverkan på klimatet. Forskning angående människors syn på och uppfattning om flyget är relativt ny och forskning rörande ämnet är mer förekommande idag än för ett decennium sedan. Tidigare undersökningar är dock i stort sett eniga om att människor, både miljömedvetna och icke-miljömedvetna personer, inte tänker ändra på sina flygvanor och flyga mindre på grund av flygets klimatpåverkan. Denna studie undersöker klimatengagerade personers flygvanor och vad de har för syn på flyget och flygets påverkan på klimatet.

The increase of complexity in embedded programming is forcing the development of higher level programminglanguages. These languages not only consist of traditional text based programming but also with graphical programminglanguages such as the programming language G from LabVIEW which is developed by National Instruments and havebeen around since the mid eighties. However since 2004 this language has also been able to program embeddedhardware, using the modules LabVIEW SDK and LabVIEW for ARM. This thesis shows how LabVIEW for ARM converts itsgraphical language G to C and then how C is flashed into the microprocessor. The thesis also takes up the pros and consof using G for embedded development.

This master thesis is an in-depth study of an existing heating system at a household cooperative in Uppsala that has been converted from district heating to a bedrock heat pump system. The study focuses on an economical system optimisation of the building?s complete heating system. The aim was to determine how well a heat pump system in large buildings actually work, find out possible ways to optimize the existing system and point out important system parameters for new heat pump installations in larger buildings.The project points out a possible energy cost reduction of 45 % without investment and further cost reductions with equipment investments. A reduction by 30 % is possible by improvements in the regulation system and 15 % is possible by maintaining the brine system.

Background: In 1998 it was stated that Swedish municipalities would report the pension liabilities according to the mixed model where the pension liabilities before 1998 was moved from the balance sheet. The mixed model has been criticized by economists for not showing the total pension liabilities. To remove some of the liabilities in the municipalities balance sheets means that the solvency improves. Some municipalities have decided to go against the municipal accounting law and recognize all of the pension liability as a liability according to the full funding model. When two accounting models are being used the comparison of the municipalities' financial statements is much harder.Purpose: The main purpose of this study was to study the reason why some municipalities apply full funding model rather than the mixed model.

Huvudsyftet med denna studie är att ta reda på om mindre onoterade aktiebolag som arbetar med forskning och utveckling valt att tillämpa K2- eller K3-regelverket. Delsyftet är att undersöka vilka faktorer som kan inverka på valet. En förhoppning med studien är att denna kan vara till hjälp för de företag som står inför valet mellan K2 och K3. I studien har en kvantitativ metod tillämpats. Empiriskt material har samlats in genom årsredovisningar, via databasen Retriever samt via kontakt med ansvarig person på företagen i urvalet.

The cost for forestry logistics in Sweden is about 25 percent of the total cost of getting the raw material to industry (Anon., 2010). There might be much to gain by taking a look at your supply chains on the logistic side in your company. In this report the logistic chains by Mellanskog for ENA Energi AB in Enköping has been looked in to. ENA Energis plant is a combined power and heating plant and about 99, 5 percent of their fuel consisted of bio energy in year 2009 (ENA Energi, 2011, länk A). The main purpose with this report is to look at three questions: 1. How does the supply chain look today? From forest to industry. 2.

During the period 2009-2013, investments in the Swedish national grid increase by a factor of ten compared to previous years. In order to fulfil their mission to manage the national grid in a safe, efficient and environmentally sound way, Svenska Kraftnät (Swedish National Grid) needs to take all these perspectives into account while planning new investments. To compare and relate perspectives of technology, economy and environment the same yard stick must be used. That yard stick is commonly money. A problem arises however as environmental issues are difficult to price.The purpose of this master?s degree project was to develop a tool for evaluation of environmental impact related to investments in the Swedish national grid.

This paper is a study of corporate governances in the municipal of Stockholm. The purpose of this paper is to enlighten the problems and opportunities for the corporate governances of the wards in the municipal of Stockholm. The municipal of Stockholm is made up of 18 relatively self-governing wards, whose activities bear a resemblance to one and other. Therefore we have specified our survey to corporate governances in the ward of Skarpnäck (Skarpnäcks stadsdel), to be able to use this ward as an example to corporate governances in the entire municipal of Stockholm. The essay emanates from the important management theories: Budget, Integrated Management system (ILS), Benchmarking and Balanced Scorecard.The essay is based on interviews and a poll survey we conducted in the administration of the ward of Skarpnäck, and also based on interviews with Stockholm?s city hall.

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.

The aim of my study is to answer the question whether there is a potential for services by working horses in the Swedish municipalities. The Swedish University for Agricultural Sciences (SLU) and Swedish Farmers Union (LRF) has started a cooperation called Climate School (Klimatskolan), with the purpose to increase knowledge in environmental and climate related issues in context of agriculture. This Master thesis is in the framework of the Climate School.Global warming is a problem that gets much attention today. Global warming and climate change are two subjects that are very much in focus on the political agenda. The municipalities of Sweden have a big responsibility concerning environmental work and to develop their own environmental thinking.

Specialarbete, 15 hpSvenska som andraspråk, SIS 133VT 2012 Handledare: Håkan Jansson.

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.