The exhaust arrangement on a Scania V8 consists of one manifold at each bank connected to a twin entry turbine (8-2-2). A study in GT-Power has shown improved performance and reduced cylinder to cylinder variations using two manifolds at each bank in combination with a single entry turbine (8-4-1). This thesis work analyses the difference in performance shown in simulation and verify it by engine test.The initial work was focused on simulation in GT-Power. Investigating how exhaust manifold volume and pulses effects the turbine efficiency and the mean effective pressure during the gas exchange. To verify GT-Power simulations four engine tests with different exhaust arrangement have been made.The results from GT-Power simulation indicate that a larger exhaust volume improve the turbine efficiency.

This paper is an event study on Initial Public Offering?s return behavior after the dot com bubble. Cumulative Abnormal Returns are used to measure the performance against a market index. The results suggest that the market correctly prices IPOs in the long run thus upholding the Market Efficiency hypothesis. Moreover, value weighted CARs show that large IPOs are more likely to outperform smaller IPOs, however in the long run there is an unpredictable pattern.

Environmental impact and management of energy is a highly topical issue in today's society. Climate impact must be reduced. The Government has set a target to reduce energy consumption in buildings by 20 % by 2020 and 50 % by 2050 compared to the energy use in 1995.With this in mind, we chose to examine how property owners can work on improving energy efficiency in existing apartment buildings. We also wanted to investigate profitability of different increasing energy efficiency measures and the calculation methods and the risk assessment performed by such investments. To tie in with government objectives, we also saw the possibilities of achieving these goals.20 companies were interviewed, of which 14 were property owners and 6 were consulting firms that works with energy efficiency.

Since the 1980s, companies have taken a larger interest in quality and it´s economic impact within the company. Having the knowledge that it´s not quality that costs money, but it´s rather the lack of quality. The work immerses itself in the field of cost of poor quality and the development of key performance indicators.The thesis is performed at Bufab Holding in Värnamo. Bufab Holding is a trading company which mainly buys and sells C-parts. C-parts include fasteners, other small metal-, rubber- or plastic parts such as wires, springs and electronic fasteners.The aim of this thesis was to make a survey of the cost of poor quality and to find key performance indicators (KPI) for cost of poor quality that can be continuously monitored.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This essay will explain the effects of decentralisation, and what impact it has on the efficiency to create a better integration for immigrants on the Swedish labour market. Examples of literature that has been examined are Marcus Gossas and Jon Pierre. From these authors, I have been trying to explain the relationship between decentralisation, cooperation and efficiency.Since the end of the Second World War until the middle of 1980, Sweden mostly received labour immigrant. Since then, the immigrant pattern has changed to consist of mostly refugees. Changed immigration patterns together with increasing debts for the Swedish government has lead to decentralisation and cooperation between public authorities has therefore become a target to reach better efficiency.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

The objective of this thesis is to explore opportunities to enhance the phosphorus use efficiencyof inorganic fertilizers in crop production, with techniques available today and in thefuture. Phosphorus is a finite resource of declining quality; therefore a phosphorus use efficiencyin crop production of only 15-30 % is unacceptable. The main reason for low efficiencyis the retention by Ca and Mg in calcareous soils and Fe and Al in non-calcareoussoils. Due to the low mobility of phosphorus, plant uptake is mainly dependent on root growthrather than diffusion. Therefore, measurements need to be taken that benefit contact betweenroot and fertilizer, before fertilizer phosphorus becomes unavailable to the plant.

The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

In todays society IT in general and the Internet in particular are given elements in people´s everyday lives, and smartphones has come to be a big part of those elements. This study focuses on how the use of Smartphones in particular influences the individuals in their working environment, and how this use influence the efficiency and the well-being of said individuals.  To answer our research question regarding how said use comes to effect the efficiency and the well-being for proffesionals in their working environment we have used data from qualitative interviews who is enriched by a short initial diary study. This data has then been analyzed using the Affinity Diagrams Technique, leading to four central themes emerging from the data. The results show that smartphone use at work comes with both positive and negative effects; efficiency increased through the use of smartphones due to the great versatility that comes with the technology, while in terms of well-being issues of stress emerged.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

A study has been conducted on how organizations in Sweden administer costs of facilities management services internally. There are three main theoretical methods for administering costs. In the first method, costs are maintained on a central level; in the second method, costs are allocated and in the third method, internal transfer pricing is used. The aim of the study is to identify which methods are applied in practice, to evaluate whether the methods fulfill their intended purposes and to study the relationship between the methods used and the cost level of facilites management services. In practice, a large diversity of methods are used for facilities management costs.

With a larger awareness of the climate changes and increasing electricity prices, energy efficiency measures in the industry have become more common. By rationalize the activity and by the same time decrease the emission of greenhouse gases the company can both save money and reduce negative environmental impact. For the Swedish industries the electricity price have traditional been relative low, which has resulted in a considerable larger usage than other European countries. By a deregulation of the European electricity market the electricity price will level off between the countries, which will cause a higher electricity price in Sweden than we are use to. To prevent that the Swedish industry don?t lose competitiveness against the other European countries, it will require energy efficiency activities in all different forms.ABB Sweden has decided to decrease their total energy usage with five percent in two years.

The society of today can?t manage without transportation. We need transports to getfood, to go to work and to create new products. The transportation ofgood is thus an important part in the function of the society and they?ll increase, bothin number and in amount.

The economic prerequisite to many farmers in Sweden after the EU membership and the new agriculture policy has generated large demands on the farm management. Until year 2004 you got a grant based on what you had produced and not on consumer demand. In 2005 a new economic aid (Mid Term Revue) was introduced and the conditions has changed again. Due to this I have chosen to do a cost-benefit analysis on a case, to investigate if the present production is sustainable in the future. My conclusion is that the profitability is acceptable even if the farm has a high debt. But to make the production more profitable the products produced should be refined as much as possible at the farm, to get maximum economic return.