Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

During the past few years an increased attention has been paid to environmental issues in the construction and property sector in Sweden. In order to simplify the work with these issues a Swedish environmental certification system for buildings called Miljöbyggnad has been developed. This thesis aims to investigate the opinion of a selected number of selected property owners of Miljöbyggnad. From that basis recommendations and actions for the future work with the system will be presented.The investigation has been conducted through personal interviews with five property owners. The main issues that the interviews have been based on are their purpose, experiences, perceived complications and future prospects in terms of certification using Miljöbyggnad.The system intends to be cost-effective, simple and to offer a relevant environmental assessment of buildings and the result from the report indicates that this is largely fulfilled.

Rational Unified Process (RUP) är en systemutvecklingsmetod som tillhandahåller ett modifierbart tillvägagångssätt för hur man skall fördela uppgifter och ansvar inom ett systemutvecklingsprojekt. Syftet med denna studie har varit att undersöka om RUP verkligen bidrar till framgångsrik systemutveckling, och i så fall även till att identifiera de vitalaste faktorer som lett till denna framgång. Fokus har legat på processkvalitet och genom en enkätundersökning, samt kvalitativa intervjuer med användare, har vi kunnat fastställa att metoden faktiskt bidrar till framgångsrik systemutveckling. De mest väsentliga bakomliggande framgångsfaktorerna som undersökningen har identifierat, är RUPs riktlinjer för produktion av dokumentation, konfigureringsmöjligheter av utvecklingsprocessen, stödet för projektledning, samt det iterativa tillvägagångssättet vid utveckling..

The purpose of this thesis is to examine and analyze the characteristics of the management control system private equity firms use to manage their portfolio companies. The thesis takes a share holder value perspective, and it is assumed that the goal of the management control system is to increase the shareholder value in the portfolio company. In a qualitative study two private equity firms and two portfolio companies, one for each private equity firm, were studied in detail. In total, nine in debt interviews were completed. The results from this study suggest that the characteristics of the control system are dependent on the surrounding context; the focus on shareholder value and the specific characteristics of the private equity industry shape the characteristics of the management control system.

AbstractThis study examines the conclusions made by Roland Paris in his case study of fourteen major post-war reconstruction efforts following the end of the Cold War, and applies them to the current reconstruction process in post-war Iraq. Paris found a common denominator of the fourteen cases ? a belief that a rapid liberalization process, turning war-torn states into liberal market democracies, would foster sustainable peace. Paris calls this belief ?Wilsonianism? after Woodrow Wilson, who was one of the first advocates of it.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

As my final project I planned to animate a movie. Usually I work with illustration and I see animation as the next step in my design work, to investigate how illustration and movement can collaborate. The purpose with my project was to develop my technical skills, improve my design process and broaden my work to eventually be able to work with animation. My ambition was to make an abstract animation and my focus was mainly on my personal process and knowledge. I also wanted to explore how much one can abstract a movie while still communicating a story or message..

The creation of value is considered the core purpose and central process of economic exchange. Value creation is now conceptualized as shared by both producers and customers, and value is seen as fundamentally derived and determined in use, the integration and application of resources in a specific context, rather than in exchange, embedded in products and manifested as price. The field of research is abundant with publications but these do not fully further the understanding of value creation and co-creation in a way that is meaningful for theoretical development and decision making in business and marketing practise. Without a thorough understanding of the factors characterising value co-creation, the nature as well as content and locus of co-creation cannot be identified. In that case value co-creation easily becomes a concept without substance. Until now, individual publications on co-creation have focused on few or different aspects, have emphasized the process from either the customer?s or from  the firm?s vantage point, have different theoretical approaches and have ignored the complexity in interactions between actors.The purpose of this essay is to analyse how five fundamental aspects of co-creation of customer value are perceived in contemporary marketing literature. Discussing the different views on co-creation, this essay concludes that thoughthere are evident points of agreement, finding one generally valid doctrine of predestination or value co-creation is improbable.

Companies constantly strive for the perfect order which enables them to satisfy and retain their customers. This is a difficult process that can be facilitated by using different picking technologies. In this study, a research of the picking technologies Pick-to-Light and Pick-to-Voice have been made to investigate when each technology is suited.In order to collect relevant information and data to be able to answer the question formulation, a qualitative study with interviews have been made. The purpose of this essay was to investigate Pick-to-Light and Pick-to-Voice to see when each technology is best suited and to see what the differences between the technologies are. With our essay we wanted to help manufacturing companies to make the right decisions when implementing a picking technology.The results showed that those picking technologies give companies a higher picking quality and an increased work efficiency since the order picking is faster to perform, and that picking errors are reduced.

Our state of emergency is good - is the public library prepared for the future?Our state of emergency is good! These are the words spoken by Prime Minister Per Albin Hansson in 1939. He claimed that Sweden had nothing to fear from a future war, we were safe. Today we know it was not so. Is this the situation for Swedish public library of today? Is the public library ready to face the future, or is it only fancy words?We have to form the future, not let the future form us.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

This report is about changes in an organization. Changes is something that every organization sooner or later is bound to do. In many cases the changes leads to problems and conflicts. I have chosen to study one change process in the home help service of the municipality of Bollnäs. The change process I have chosen to study is about changes in the day-to-day work for the employees at the home help service.