This is a technical report about cement stabilization in general and the stabilizationprocess during the construction of a warehouse in Halmstad, Sweden in particular and iswritten at the section for economy and technology at Halmstad University incollaboration with NCC Anläggning.NCC encountered variations in compression strength in the stabilized material on the firstwarehouse that they constructed for the company Biltema. In our report we used thestabilization process of the second warehouse for the same company as a reference todetermine what could be done to get a more homogeneous result for future projects.We also looked in to what testing method is the most suitable to determine the result ofthe stabilization.After interviews with people involved in the process and visits on the work site we havecome to the conclusion that the most probable cause to the variations in compressionstrength is segregation in the ballast material. This segregation can occur in severaldifferent occasions in the process such as during the production, transportation andhandling on the work site.Other causes for the variation can be improper compaction, overlapping stabilization insome places and different duration of hardening of the samples that are tested.The best way to do in situ test of the stabilized material is to do seismic investigations asthose are non-destructive tests in comparison to taking core samples and you can discoverany cracks or air bubbles in the material..

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

Our paper is based on matrixes and the feedback process as tools in the daily work in the higher education system. The main purpose with this paper is to investigate if these tools can enhance the effect of formative assessment and increase students? empowerment in the courses. In do-ing so, we investigate if students experience that their efforts result in increased progression in their courses and if they acquire adequate proficiency in the subject matters native to their pro-grams, along with an increased desire for lifelong learning. Compulsory collection of data for profit is conducted through interviews of students in year one of the IT media program and the IT program.

AbstractVäxjö University, School of Social SciencesBachelor thesisTitle: Varför en rädsla för alternativmedicin? En studie om hur EU?s kosttillskottsdirektiv har implementerats i Sverige.Author: Annica BlomstrandSupervisor: Anne Haglund-MorrisseyThe aim of this study is to investigate the process of legislation and implementation of the directive of the European Union on the food supplements, focused on member state of Sweden.There are two questions in this study: What was the process of legislation in the period when the Directive on the food supplements became established? and How does the implementation of EU?s decision on the food supplements works in reality? In order to answer these questions, two different methods were used. One was qualitative analysis of the available text and the other one case-study (qualitative including interviews)The conclusion is that the implementation has not been successful. The process of legislation has followed its traditional way, which in its turn did not leave so much space to the thorough implementation of the Directive. Unfortunately, this is a process that overlooks citizens and countries with different premises, affected by the decision.Keywords: EU, kostillskottdirektivet, lagstiftningsprocessen, implementering, organisationsteori, fallstudie.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

Husums plant has a selection of different pulp pumps at bleaching plant 4 and 5. The displacement- (HC-pump, Sund Defibrator PTD-60) and centrifugalpumps (MC-pump, MCA 42-200, MCP 30/20) are of interest in this report. The centrifugal pumps are controlled by throttle valves, which result in an energy loss. Chemical mixers are used to mix ClO2 into the pulp before proceeding into a holding tower where the bleaching process occurs.The energy demand of the different positions has been measured or calculated to be used in comparisons against new equipment. Quotations were requested and delivered from Valmet and Sulzer.

The Motor Group of the European Council was commissioned in the autumn of 1997 to prepare a proposal for a new European Bus and Coach Directive. In the beginning, most of the Member States did not have the accessibility requirements as their main concern; still a smaller network with actors from the National delegations from Britain, Germany and Sweden would influence the other National delegations in the Council group to finally agree to retain the requirement of accessibility of the Directive. Within the EU decision process, the European Disability movement acted as a strong player during the whole negotiation process using the proposal to a new Bus and Coach Directive as a tool to influence key actors to go towards a Directive with a strong approach for accessibility.Policy Transfer and Policy Transfer Network are used as analytical tools to understand and structure the transfer of the question of accessibility during the negotiation process. Actors understanding how the bureaucratic process works within the EU decision system have a chance to contributing for the changes in the directions they wishes for within a range of policy areas. The principal aim of the Directive was to guarantee the safety of passengers and to provide technical prescription in particular to wheelchair users.

The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.

The development of farm-operated biogas plants in Sweden is increasing. This study investigates the process that firms go through in developing such ventures. The aim is to identify obstacles and opportunities that individual farmers have encountered during the implementation process, and through a comparative analysis find similarities and differences between cases. The overall goal is to increase understanding of the factors that influence farmers? development of farm-based biogas production, and more specifically, explore opportunities for support organizations to contribute to the innovation process. Findings indicate that the implementation process has changed over time.

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

Today equal representation between the genders in parliament is something to be desired. One way to reach the goal of equal representation is by using quotas. The purpose of the study is to research the lack of equality in elected institutions by using a perspective on qoutas.  The study also seeks to find answers to if using quotas is a good method according to gender studies. A text analysis is being used to find reasonable solutions to the study´s presented complivations.  By analyzing different texts about quotas some of the more common arguments in the discussion about using quotas in parliaments were highlighted. Some of the more frequent arguments to implement quotas are that it would be more just but also that women and men may have different interests, experiences and therefore equal representation would be a question of resources.

The aim with this master thesis is to analyze a scientific material concerning the context between learning and child/student development, and factors which controls process of learning, to create an image with quality account and teaching in mathematics, which then can raise the mathematical knowledge among students.The phenomena which stand in focus for the investigation is: why there is a negative tendency for development of knowledge in mathematics, among the Swedish students that TIMSSs investigations showed in intercultural comparison within the years 1993, 1999, 2003 and 2007.The method is the ethnographical method, which is based on: analyzing scientific theories about learning child/student development, factors which controls process of learning, and factors which controls process of learning the most and qualitative empiric investigation with qualitatively analyzes the questionnaires, which is about factors which are controlling the process of learning and factors which are controlling the process of learning the most.Result of the theoretical and empiric analyzes shows that factors as school environment, attitude for subjects and teaching, controls and influence the learning. To end a unenthusiastic tendency as a negative development of mathematical knowledge among students that is shown in TIMSS investigation and to elevate the students' performance in mathematics, an elevated qualitative account and teaching in mathematics, by the factors named. Safe school environments as the intercultural meeting place, the teachers influence part to the students' subjects' attitude in mathematics and goal related grading criteria in teaching, is all required for e qualitative teaching in mathematics..

The function of budgetary controls is to control the resource allocation within companies. It can also be an instrument for measure and control subordinates and/or business units? performance (Van der Stede 2001). This paper concerns the latter; when the budgetary control function is used to measure and control subordinates performance based on budget. Previous research in this area has not yet accomplished to explain the effects of tight budgetary control which Hartman (2000) considers as the main issue to be concerned about in management accounting research.Previous research has presented contradictory findings regarding tight budgetary control explained by positive effects as well as negative effects during the last decades.

Public participation in urban planning is meant to increase democracy in the planning process. Even though all citizens have the option to participate in urban planning debates, few seize their chance to partake. This thesis describes a study on how user needs are met and prioritized in design processes concerning urban planning. The aim was to determine whether user-centered design (UCD) methods could be used as an avenue for public participation in urban planning and ultimately invite more citizens into the planning process.The thesis details a design process where a team worked to develop Farsta, a suburb of Stockholm. The design problem was the question of how Farsta could become an attractive business location.