Storm water is defined as runoff from precipitation such as rain or snow. It is collected in sewage disposal systems and since it mainly originates from urban areas it can contain high levels of heavy metals, nutrients and oil etc. Polluted storm water is currently treated by different methods such as wet ponds, constructed wetlands and filter strips. This study investigates these methods, which in earlier studies have shown to give varying results regarding their treatment efficiency.This thesis has been written on commission of SWECO VIAK and was aimed at studying those parameters that may affect the treatment efficiency of nutrients and heavy metals in storm water treatment facilities (STF:s). Through literature studies the dominating treatment processes in ponds and wetlands were examined.

Förorenat dagvatten från Stena Gotthards metallåtervinningsanläggning i Eskilstuna har filtrerats genom kolonner innehållande två olika adsorbenter, torv och furubarksflis. Torv är en organisk jordart som främst används som bränsle och furubarksflis är en biprodukt från skogsindustrin. Båda filtermaterialen är relativt billiga och finns i stora kvantiteter i Sverige. Filtermaterialen har visat sig ha varierande kapacitet att adsorbera metaller i vatten på grund av själva materialet samt vattnets sammansättning. Resultatet från den här studien visar att av de två undersökta filtermaterialen så har furubarksflis störst kapacitet att reducera bly, koppar och zink från det specifika dag vattnet..

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

This paper illustrates the working conditions at the copper factory in Åtvidaberg during 1800-1890 from different views. The highest salary was given to the building contractor. Thereafter came in order the rust turners, the garmaker, the melter, the ore booker, the factory supervisor and the garmaker hand. Also the rest of the working conditions for different employees might differ from each other in this order. The mine workers generally earned a little less than the other workers at the factory, and especially the workers in the Bersbo mine.

Dagvatten från vägar innehåller ofta tungmetaller. De vanligaste metallerna i vägdagvatten är bly, koppar, kadmium, nickel och zink. Dessa föroreningar utgör en belastning i recipienter som tar emot dagvattnet. I denna rapport har bly, koppar och zink reducerats från vägdagvatten genom filtrering i kolonner med amorf, granulerad masugnsslagg och sand. Masugnsslagg, som är en biprodukt från framställningen av järn, är en alkalisk produkt med goda sorptionsegenskaper vilket gör den lämplig att använda som filtermaterial för vatten förorenade med metaller.

Dagvatten från vägar innehåller ofta tungmetaller. De vanligaste metallerna i vägdagvatten är bly, koppar, kadmium, nickel och zink. Dessa föroreningar utgör en belastning i recipienter som tar emot dagvattnet. I denna rapport har bly, koppar och zink reducerats från vägdagvatten genom filtrering i kolonner med amorf, granulerad masugnsslagg och sand. Masugnsslagg, som är en biprodukt från framställningen av järn, är en alkalisk produkt med goda sorptionsegenskaper vilket gör den lämplig att använda som filtermaterial för vatten förorenade med metaller.

The purpose with this thesis was to examine the cold rolling mill located at Högskolan Dalarna and to stabilize the rolling process, to achieve steady state. Experiments with cold rolling of an aluminium strip have given results for rolling force, friction, reduction, strip tension and strain hardening. Results show that steady state has been found for the experiments with roll force and strain hardening, and not been found for the experiments with friction and reduction. Results show that increased strip tension gives lower roll forces. The roll force equation of Stone shows comparable results with reality for dry contact with reductions up to 30 %, but starts being incomparable with higher reductions.

Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

It is important that the current urine separating systems are evaluated to allow improvements to be made and consequently increase their future propagation. In order to increase the knowledge about urine separating systems this study was made. It included, among other things, measurements of amounts of urine as well as of the composition of urine collected at Nytorgsgatan 4 in the city of Hallsberg. The study was increased after an inquiry that also included the district of Understenshöjden in the city of Stockholm. In the inquiry, the users were asked questions about odour, cleaning of toilets and occurrence of blockages in the urine water locks etc.

SAMMANDRAGHistorisk Simulation, Delta-Normal och RiskMetrics prestation utvärderas med hjälp av Kupiecs Backtest. Value at Risk (VaR) beräknas med tre olika konfidensnivåer utifrån Affärsvärldens Generalindex och HSBC kopparindex. Utifrån överträdelser från verkligt utfall undersöks vilken VaR-modell som estimerar marknadsrisken bäst. VaR-modellernas prestation jämförs, och i analysen utreds hur konfidensnivå och tillgångars egenskaper påverkar VaR-modellernas prestation. Resultaten visar att Historisk Simulation presterar bättre än Delta-Normal och RiskMetrics på den högsta konfidensnivån vilket troligtvis beror på att RiskMetrics och Delta-Normal antar normalfördelning.

The metal mining history goes thousands of years back. The downside of the mining industry is the large amount of tailings created during the mining operations. Drainage and leaching of heavy metals from these tailings may cause major environmental problems including acid mine drainage and leaching of heavy metals. This study examines a pond located near an old mining site, where part of the old mining facility has been recently (1990) restored. The objective was to assess eventual metal contamination from historical mining and the recently performed restoration using a sediment core as a natural archive of historical metal inputs to the pond.

This report contains a degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.