Root rot causes large economical losses for Swedish forestry. The spread of root rot can partly be prevented by treating the spruce stumps in thinnings. Late pre-commercial thinning (PCT) is one of the forestry measures where stump treatment is not used. Late PCT can be defined as: The act of cleaning the stand with the aim of improving accessibility and sight within the stand, and so to increase the mean stem´s volume during the first conventional thinning. The aim of this study was to examine how late PCT is performed, its spatial extent and if it aids the spreading of root rot. The study was limited to encompass late PCT before first conventional thinnings in spruce stands in southern Sweden. Samples of spruce stumps were taken from four stands where late PTC had been carried out.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

Identification of fungi is based on macroscopic observations of morphology and microscopic characteristics. These conventional methods are time-consuming and requires expert knowledge. For the past years Matrix-assisted laser desorption ionization-time of flight mass spectrometry has been used for routine bacterial identification in clinical laboratories but not yet in the same extension for fungi. In this study three preanalytic preparation methods for fungi were evaluated in order to shorten the processing time in routine laboratory performance.Clinically relevant strains (n=18) of molds and dermatophytes were cultivated on agar plates and prepared according to the different preparation methods for protein extraction. Each strain was analyzed in quadruplicate by the MALDI Biotyper and the database Filamentous Fungi Library 1.0.The results showed that the genus and species identification rates of the least time-consuming direct extraction method were 33% and 11% respectively.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

Introduktion: MR-undersökning är en högteknologisk undersökningsmetod som blivit allt mer värdefull vid diagnostisering av olika patologiska förändringar, särskilt i mjukdelarna. Trots att MR-undersökning är en bra modalitet kan den vara förknippad med oro och ångest hos en del patienter. Syfte: att belysa hur röntgensjuksköterskan kan stödja oroliga patienter som genomgår MR-undersökning. Metod: En litteraturöversikt baserad på Fribergs modell har valts för detta examensarbete. Litteraturöversikten bygger på 12 artiklar som tagits fram via databaserna Cinahl, PubMed och Scopus.

Title: The Investment Savings Account ? Standard Taxation ? Right in TimeAuthors: Gustav Mårtensson and Erica Nordström LöfSupervisor: Göran HäggBackground: In order to facilitate and stimulate financial investments among privateinvestors the organization Aktiespararna made a proposal for a standard-taxed account. As aresult of this, the Swedish government decided to implement the Investment Savings Accountin January of 2012. The introduction of the Investment Savings Account implies that there arenow three different types of accounts for financial investments that are differently taxed onthe Swedish Market. Private investors can improve their after-tax results by combining AssetAllocation and Asset Location, according to earlier studies.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

In the 1970s and 1980s, Sweden held about 15-20 certified health resorts that wanted to improve peoples? health with vegetarian food and alternative medicine. This essay aims to explore the popularity of health resorts through a patient?s perspective. What did the patients look for at the resort, which they could not find in the official health care? A basis for the analysis is Bonnie Blair O´Connor?s theory of Health Belief Systems.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Sahlgrenska Academy at University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Can peppermint oil relieve the symptoms of IBS?A systematic reviewAuthor: Caroline Månsson and Linn RamströmSupervisor: Fredrik BertzExaminer: Frode SlindeProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 23, 2013___________________________________________________________________________Background: An estimated 7-10% of the world population suffers from Irritable BowelSyndrome (IBS), a disease that greatly affects the daily life and the quality of life of the afflicted.The total annual health care cost of IBS is around 1280 billion Swedish crowns. IBS ischaracterized by abdominal pain/discomfort in combination with diarrhoea, constipation, or acombination of these. The etiology is unknown but it is believed that there are several factors thatcome into play. The disease cannot be cured, but there are ways to alleviate the symptomsthrough a variety of medicinal preparations and dietary treatment.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.