This is a diploma thesis executed as a part of the examination of the educationalprogram Building engineer ? Construction management at Halmstad University. The aim of the thesis is to compare and evaluate conventional open-cut pipe-laying withhorizontal directional drilling. The thesis includes a comparison of the economic,environmental and time-based aspects of both methods and discusses which factorsthat determine the optimal choice of method.The study is mainly based on previous studies regarding the subject and oninterviews with professionals from the industry.A fictional project with five realistic cases of pipe-laying scenarios was compiled,sent to different companies for calculation, evaluated and compared. Our conclusionregarding when it?s suitable to use which method is entirely dependent on thespecific project.

This study was carried out as a commission from Holmen Skog, district ?Egen skog? in Norrköping. During October 2006 several stands were inventoried by aerial photos from helicopter. The stands were those for which the next action proposed was plant inventory or plant check. The photos were interpreted and the number of stems was calculated.

Changes in the environment are affecting the world market, and pressures from several stakeholders? are forcing different enterprises to adjust to the current situation. Farmers? difficult working conditions and environmental impacts of the conventional cotton production in India have been highlighted. The small-scale production that is characterising India?s cotton farmers implies an insufficient competition power.

This study investigated potato growing in beds as an alternative to conventional ridges.It was based on results from field trials on bed-grown potatoes carried out by Halland Rural Economy and Agricultural Society in 2007, studies of literature and interviews with farmers with experience of bed growing of potatoes. Due to their shallow root system, potatoes are one of the most drought-sensitive crops. Potatoes are often grown on sandy soils with poor water-holding capacity. Factors such as total yield, tuber size distribution and quality defects are negatively affected when water becomes insufficient. Wide beds have a more flat top which leads to more uniform water infiltration. Further on, beds have lower soil surface area due to its shape, and therefore, retain water more efficient. In the field trials, which were carried out at the Stjärnarp Estate near Halmstad, potatoes were grown in beds alongside a conventional ridge-grown crop.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

The most common way to treat wastewater in Sweden today is by a combination of an activated sludge process and a chemical treatment. These processes are not very energy efficient and may not be the most environmentally friendly. That is why it is interesting to evaluate new alternative methods to see if they can be less harmful to the environment and help to a lower resource consumption. New techniques are tested in a pilot installation at Hammarby Sjöstad, Sjöstadsverket. To be able to evaluate these techniques in a wide perspective system analyses are conducted where different impacts can be considered, advantages and disadvantages in the systems.Five system structures for water treatment have been constructed in Matlab/Simulink in this study.

Magnetic resonance imaging (MRI) is a safe and painless diagnostic method. The patient may become concerned, suffer from anxiety and experience the examination as unpleasant. Detailed information and a good treatment can reduce anxiety and distress for the patient. The purpose of this study was to illuminate the patient?s experiences in connection to MRI, and to describe the patients needs for information and treatment.

The aim of this study was to investigate which elements that functioned in a positive way on the natural behaviors of dairy cattle among KRAV certificated and conventional farms. The study was based on reading of earlier research and completed by interviews with farmers, animal health inspectors and consumers. The results showed us that the KRAV certificated farms used only loose housing barns and that the cattle were allowed a pasturetime of five months, or more, in one year. Our interviews with the consumers confirmed that KRAV was a well known trademark. The conventional farms were more flexible in their choice of housing systems, and used both loose housing barns and barns with the cattle tethered.

The aim of this study was to investigate which elements that functioned in a positive way on the natural behaviors of dairy cattle among KRAV certificated and conventional farms. The study was based on reading of earlier research and completed by interviews with farmers, animal health inspectors and consumers. The results showed us that the KRAV certificated farms used only loose housing barns and that the cattle were allowed a pasturetime of five months, or more, in one year. Our interviews with the consumers confirmed that KRAV was a well known trademark. The conventional farms were more flexible in their choice of housing systems, and used both loose housing barns and barns with the cattle tethered.

Organic animal husbandry has received a lot of criticism lately. The aim of this literature review was to examine if the rules and principles of organic pig farming give better or worse welfare in comparison to the conventional systems in Sweden. Health, physiology and behaviour have been used as indicators of welfare in this study. This is due to the importance of using more than one indicator in welfare assessments. Studies have shown that organic pigs have more remarks on joints when slaughtered, but these remarks can be reduced by vaccination against erysipelas.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

Grid codes are becoming more demanding on power generating units due to the factthat the complexity of the power grid is increasing. The penetration of wind powerhas grown over the last years and it is clear that wind farms need to be addressedwith the same type of grid codes as conventional generation units. There is howeveran undeniable difference between the technology in conventional synchronousgeneration units, and the asynchronous generation units in wind farms.This thesis has reviewed the current grid code in Sweden and compared it to the newcode proposed by ENTSO-E, ?the Requirements for Generators?, in the aspect ofwind farms with an installed power of 30 MW or more. The comparison has beencomplemented by an analysis of how wind farms of two different technologies(Doubly fed induction generators and full power converters) can meet therequirements and technical proposals have been given on how to be able to meetcompliance with the new grid codes.The Requirements for Generators contains many non-exhaustive and optionalrequirements, because of this it has been difficult to, at this stage, exactly point outthe technical impact on the grid connection of future wind farms in Sweden.

In the pilot plant at Hammarby Sjöstad, Sjöstadsverket, several new methods are tested in order to achieve a good use of resources. When a new technique is considered it is often the performance of the technique itself, under given conditions, that is evaluated. However, in order to evaluate the overall function the whole picture is needed. With a system analysis it becomes possible to make a comparison where all the positive aspects are put up against the negative ones, for the technique itself as well as its requirements. In this way the influence that minor components have on an entire system can be considered.This report presents a system analysis of an anaerobic membrane reactor (MBR) with a VSEP-membrane (Vibratory Shear Enhanced Process).

A recommendation for stand treatment of lodgepole pine (Pinus contorta) is, in a scientific point of view, lacking when it comes to harvesting for biomass energy. Within the next decades it is expected that 280 000 hectares of lodgepole pine will have reached thinning age on the domains of Svenska Cellulosa Aktiebolaget (SCA). Due to this the interest has grown rapidly for studying the possibilities of harvesting biofuel assortments already in the first thinning. In this study the distribution of the biomass within lodgepole pine trees has been studied and taken into account for estimating the proportions of harvested assortments when using different methods of thinning. The methods studied were conventional biofuel-harvesting (with delimbed branches gathered separately from the round wood) and thinning with cutting of round wood and long tops (incl.

About 80 % of all Swedish dairy cows are kept in tie-stalls, but loose housing is increasing, probably because it is more profitable for the farmer. The design of the floors is of cruicial importance to the cows well-being. Traditionally, the most common type of floor in the alleys of a cubicle system still is a slatted manure-draining floor made of concrete. The typical Swedish design has 125-mm slats and 40-mm slots, maximally. With too wide slots, there is an increased risk of injuries to the claws when the cow makes a hasty move.