Swedish dairy production has during the last decades undergone considerable structural rationalisation and the number of dairy herds has decreased to less than 7000. At the same time the average herd size has increased and a large proportion of those investing in new buildings today choose automatic milking (AM). During 2008 more than ten percent of the Swedish cows will be milked with AM. The development has been faster than expected and the need for consulting has increased rapidly. This study aims to evaluate whether a check list originating from the FRISKKO (?healthy cow?) programme can be a useful tool when assessing how well the herd functions in various areas.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

The cost of construction projects have increased during the past few years. Different actors in the construction industry work together to advocate various measures to mitigate these cost increases. One of these measures is to try to improve the efficiency in the phase of production. By striving for a kind of standardization with a constant quest for improvement, the productivity can increase while the costs of production fall.For this thesis has a case study been conducted at the construction company JM AB which is seeking this. They call the approach structured production and have implemented various measures to achieve a more productive output.Based on information from reconciliations, the cost and the spent hours of craftsmen have been analyzed at the company where the case study took place.

The margin in crop production is more and more less and it forces the producer to check out how to reduce the cost of establishment of new crop. One way to reduce the cost in establishment is to begin with plough less farming. It saves money and time compares to conventional soil preparation with plough and harrow. Not all soil types are god for plough less farming and should be continued with ploughing (mainly light soil), but other soil types working very well with plough free farming. If you want to success with plough less farming you have to think in new lanes. One of the things you have to think about is to not grow too much cereal after cereal. Low stubble is important when you harvest the crop and also to spread and chop the straw well. I have in this work interviewed some farmers and farm advisers in Östergötland to see which thoughts they have about plough less farming.

This thesis examines Swedish filmmakers' modes of work and production within the Swedish film landscape. An introductory historical overview treats the Swedish regionalization since the mid 1990's. Political and economical aspects of producing films in various regions serve as a background for understanding the new generation of decentralised Swedish filmmaking, and the use of sound and music in contemporary film. The analysis consists of empirical studies; interviews with directors and producers, working with music for film and TV. Although the filmmaking perspective is in focus, composers and film scholars are heard as well.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

This project includes development of new packaging for dry spices and an investigation of how to automate the production line. The preliminary investigations show needs of an environmental friendly packaging possible to re-close. After screening for suitable materials three concepts were developed, a stand-up pouch, a plastic jar and a metal can. The pouch was excluded in a concept choosing process. In this process it was also decided to further develop the metal can concept.

This work consists of two studies. One is based on an inquiery to nurseries with production of woody plants, and the other on visits to gardencenters, primarily in Skåne but also in Stockholm. Inquieries where sent to 87 nurseries, 48 of them replied. The purpous of the inquiery was to make a thorough investigation of the ligneous production at the Swedish nurseries, what is produced and in what quantities. Within the inquiery was also a thorough look at the fruit tree production. This to be able to conclude what cultivars that are produced and how large part of that production that is certified according to the Swedish Board of Agriculture (SJV).

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

At present, the Swedish pig industry is in transition. Prices have been low, but feed prices have increased. Therefore, many pig producers have stopped their production. Producers that lack an integrated production may contract piglet?s producers, or may use the mediation services that slaughterhouses provide.

If Sweden want to be able to compete internationally with its production capacity,it is important to work actively with production development and production ofresource-and time-efficient. This report is a bachelor thesis of 15 hp conducted atthe University of Halmstad. Using the principles of continuous improvement andLean Production, the author developed a concept for HAGS Aneby AB to changeto the customer order driven assembly of spring toys.First of all, the theories of Lean Production, logistics and ergonomics are used tobuild and present a theoretical framework for further examination. Then, toachieve the target, the current assembly process is analyzed to develop some firstconceptual ideas for improvement. In order to develop the best advice, theconcepts are evaluated against the company?s requirementsThe developed action plan gives recommendations on how the company shouldrestructure their assembly process and the organization of the related departmentin order to produce spring toys in a more time efficient and lean way.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

A majority of Swedish consumers have a positive attitude towards organic production and the number of organic products on the market is increasing. Despite these positive trends, there are still relatively few consumers who choose to buy organic produced products. According to statistics, only 3% of the total sales of food consist of organic products. The aim with this essay is to understand what is needed, both from the grocery store and the consumer's point of view, to increase the consumption of organic food. Information has been collected partly through questionnaire with consumers and partly through analysis of sales statistics for a selected numbers of products. Then the empirical material have been analysed in the light of a combination of the Behavioural Perspective Model (Foxell, 1997) and Kotler's Four P:s (Kotler, 2002). Consumer's willingness to buy organic products is influenced by a number of different factors. One important thing is if the grocery store offers a behaviour setting that stimulates the consumers positive attitude and facilitates their possibilities to collect new information. Furthermore, the store needs to offer a broad and well-visualised selection of organic products.

Today cultivation of cereal in Sweden has high costs for establishment in relation to the rest of the world, and if this cultivation will be able to continue, the farmers have to control their costs. It is important to see all costs, not the maximum harvest achieved, but the net result. All farmers have different conditions with respect to soil, direction of the farm and were the farm is located geographically. With the right knowledge and ambitions, we think most farmers could change to reduced tillage. In this paper we have tried to find out if reduced tillage is an alternative for farmers.