The intrest and development of bioenergy and energy from renewable sources in Sweden has increased rapidly over the last few years. There are a whole lot of alternatives for those who would like to venture and invest in renewable energy production. Production of renewable energy opens up many opportunities for forestry and farming to venture a new branch of production, on basis of the primary production. Several of the new energy sources grows on farmland or in the forest. The opportunities exist in the primary products, as well as in refining and reselling, in the value chain of energy. The starting-point is the Farmer as an energyproducer. This master thesis studies the nature of farmer-own firms, who has invested in production of renewable energy.

During an excavation at Old Uppsala 571 raw garnets was found. In comparison with similar fragments from other sites in Sweden my aim was to prove a completely domestic production of garnets for cloisonné work. I have chosen to look at the archaeological sites of Old Uppsala, Valsta, Slöinge and Paviken and more closely at the material from Old Uppsala and Valsta. My theoretical framework has been to look at the garnets own agency in the contemporary society.Garnet cloisonné was a popular jewellery form during the Merovingian period on the continent although it came to an end in the early 7th century. It was during this time in Scandinavia a new sort of garnet, technique and paste was introduced and the garnet cloisonné was profoundly used for the gear of the elite and ritual objects.

This thesis aims to contribute to improved functional procurement of photovoltaic systems, PV systems. Functional procurement means that criteria concerning a function are set rather than specifying technical details or products. Possible advantages and difficulties in using functional procurement have been analyzed by interviews, simulations and a case study. Electricity production and surplus production for different scenarios have been simulated via MATLAB. The MATLAB script was also used to generate rules of thumb on feasible solar fraction for six different load profiles; a church, a farm, a car mechanic, an office, an industry and an apartment building.

The interest for locally produced food has increased the last couple of years, and some consumers have a willingness to pay a premium for niche products like locally produced food. At the same time it seems like the Swedish pig production are in a negative development period. This study tries to see if locally produced pork could be a possible factor which might affect producers in the county of Västra Götaland views on different aspects regarding their production. Consumers of pork and their point of view regarding locally produced pork were also studied. Surveys to consumers and producers were constructed. Although previous studies claim the opposite, in the two locations (Högsäter and Uddevalla) where the consumer survey were performed, there were more men than women that always bought locally produced pork.

Zambia is a country in Southern Africa where poverty is widespread and the traditional keeping of local poultry therefore plays a crucial role in improving nutrition. Meat and eggs from poultry are important sources of protein but also of income. Improving the poultry production is thereby a method to fight poverty. For poultry, the access to light is an important factor for both growth and egg production. In this paper, the focus is on the traditional village chickens used for both egg and meat production, how they are kept, their health and welfare and if the use of a solar lamp will influence their behaviour, growth and egg production. Three studies were conducted in Chibombo and Choma Districts in Zambia were 17 farmers were interviewed regarding the village chicken management of which six farmers participated in a solar lamp experiment.

This thesis consider alternatives for heating and cooling planned office buildings at Arlanda airport. The thesis is divided into three parts where the third part is a shorter synthesis of the two first. In the first part the energy demands of the buildings are modelled in a computer program. Two different building models are created, one more conventional and one with good energy properties. The results shows that with proper construction and ventilation systems etc.

Effektivitet är för många organisationer ett begrepp som förknippas med att utnyttja sina resurser maximalt. Detta är något som även är märkbart inom svenskt skogsbruk, där man idag är mycket mån om att vara resurseffektiv i sin verksamhet. Det finns dock fler innebörder av effektivitet som begrepp. Toyota, med sitt Toyota Production System, och lean production har bevisat att en flödeseffektiv process med kundfokusering kan vara ett framgångsrikt arbetssätt. Denna studie tar upp lean production som teori i svenskt skogsbruk och knyter an denna mot virkesanskaffningsprocessen.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

StoraEnso decided in year 2002 to build a pulp mill in the province of Guangxi, southernChina, and also establish eucalyptus plantations to provide it with raw material. By 2010StoraEnso controls about 90 000 of planned 120 000 ha, out of 75 000 ha is already plantedwith Eucalyptus.By using better genetic material, improve the tending, selecting the sites more careful and byusing a proper fertilization regime StoraEnso hopes to increase the mean annual incrementfrom today?s 25 m3/ha, on bark, to 35 m3/ha. This study is one part in this work to increase themean annual increment in the plantation.This master thesis is the forth in a series, that has followed up a fertilization trial that startedin spring 2006 when the trial was laid out and treatments decided. The aim with the trial is toexamine the production potential of Eucalyptus urophylla in Guangxi, southern China.

There are several factors influencing the profitability of production with sheep. Two of the most important factors are ewe fertility and lamb survival. Also growth capacity of the lambs is important. This paper aims to review correlations between the ewe?s fertility and maternal behavior and lamb survival.

In 2005, Outokumpu began to implement its system of continuous improvement, OK> 1, at Avesta Jernverk. OK> 1 has not generated sufficient results on plant KPI:s. The purpose of this study is to identify the understanding,  participation and commitment regarding to OK> 1, and to suggest some actions to make OK> 1 more successful with emphasis on these three aspects. The thesis shall also determine whether there are any differences in the attitude towards OK>1 between Blue Collars and White Collars.The study consisted of a survey, and interviews. The output from these methods were processed and analyzed and finally resulted in a SWOT ? analysis and suggested actions for improving the understanding, participation and commitment towards OK>1.

All companies wants? to be as profitable as possible. The company in question is one of the leaders in it´s field in Sweden. In order to increase profits as much as possible it is important to identify and eliminate eventual quality defect cost as far as possible.This study was performed in Huddig AB, and the purpose of this study is to try to develop a routine for monitoring the quality defect costs, and to improve communication and create feedback between production and aftermarket.In addition to an extensive literature review on quality defect costs most of the work have been conducted at the company. Own observations and interviews have been done with the staff to get a picture of the current situation and to try to come up with improvement proposals.During the study it was proved that much of the quality defect costs in essence, derived from the production, which is seen as positive because it is the easiest part of the company to improve.

Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed.