This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Tidigare ombesörjde organisationen karriär och karriärutveckling för den anställde och karriärkontraktet byggde på livslånga anställningar. Det nya karriärkontraktet bygger istället på en så kallad proteisk karriär (Hall, 1996), vilket utmärks av att individen ser sig själv som ansvarig för och drivande av sin karriär, att egna värderingar får styra samt att psykologisk utveckling är främsta mål. Studiens frågeställning var att undersöka om personlighetsfaktorer i termer av self-efficacy, självkänsla, locus of control samt neuroticism kan predicera proteiska karriärattityder. I studien användes kvantitativ metod och en enkätundersökning genomfördes på studenter. Korrelationsberäkningar visade att samliga personlighetsfaktorer samt proteiska karriärattityder var korrelerade.

Sekretessbelagd.

Det pågår en transformering av svenska stridskrafter till följd av en förändradomvärldsbild och en teknisk utveckling. Obemannade farkoster studeras och bedömskunna tillföra värdefulla förmågor.Syftet med uppsatsen är att undersöka nyttan med små UAV-system för bataljonsnivånvid en internationell militär operation. De fyra utvalda basfunktionerna ledning,underrättelser, verkan och skydd utgör analysfaktorer.Uppsatsens resultat omfattar en kontextuell del och en teknisk del. Den omfattar även envärdering av små UAV-system i ett typfall, strid i bebyggelse. Uppsatsen visar att detfinns ett flertal uppgifter inom basfunktionerna, som små UAV-system kan lösa medvarierad förmåga.

Today there is an even higher demand on IT-projects success rate compared to a few years ago. IT-projects must be handled more efficiently and result in a more profitable investment. In order to make the handling of IT-projects more efficient and create profitability the developers must have a broad understanding of the IT-projects characteristics and which factors that affect the result of the projects. Changes within IT-projects are often carried out through the development of a system. Since this change is more common when it comes to IT-projects it is important to handle risk and change within these kinds of projects in order to prevent and avoid uncontrolled changes.

Background: Since the start of the twenty-first century it has become very important for companies to act in a responsible manner, in guides of CSR. The idea is that companies have more responsibilities than to achieve a higher profit for their shareholders. They should also care about the society and act in a responsible way.Problem discussion: Problems concerning CSR are that the internal part of the sustainability work has not encountered the same level as the external part of the sustainability work. Companies are today struggling with implementing CSR into their business strategies.Research questions:1. What does a company has to consider when working with CSR? 2. How can management Control systems help the implementation of CSR into the organisation?Purpose: The purpose of this thesis is to examine what a company has to consider when working with CSR and how management Control systems can help the implementation of CSR into the organisation.

Denna studie handlar om molnbaserad ekonomistyrning i små och medelstora företag och hur en existerande ekonomistyrningsmodul kan utvecklas i ett molnbaserat redovisningssystem. Fallföretaget i studien är Fortnox AB som vid uppsatsens början hade en ekonomistyrningsmodul som ansågs bristfällig. Prototyping kommer vara en stor del av studiens ansats och den efterliknas med en utvecklingsstudie inom systemutveckling. Den prototyp som utformas och förädlas genom studiens gång ska bidra med att Fortnox får ett bättre redovisningsprogram att erbjuda samt att revisionsbyråer och slutanvändare kan utvinna en bättre ekonomistyrning ur deras redovisningssystem. En sådan här systemutveckling förutspås också få ett par effekter hos små och medelstora företag vilka studien även ska kartlägga.Resultat: En ekonomistyrningsmodul anses enligt denna studie behöva erbjuda anpassningsbarhet, användarvänlighet, enkelhet, överskådlighet, vitalitet, grafisk och designmässig attraktivitet samt interaktion för att få genomslagskraft.

The Airsoft Community always search for realism and optimal performance.When the performance and/or the realism in your AEG1 aren?t enough you turn to modifications toimprove the weapon. But to manufacture such modifications isn?t that easy, hence you turn tocompanies that are specialized in creating such devices.The goal with this project is to create a prototype of a modification called ?Programmable MOSFET?and targets optimization of the electrical components within the AEG. This means that you digitalizethe control of your AEG thus entails new functions and more stability to the system that isn?t possiblewith its mechanical predecessor.A prototype has been manufactured and programmed with functions according to requirementspecificationsthen it was tested on an airsoft-gearbox with rewarding results.

Change is inevitable when software is built and deployed. It?s not particularly problematic to manage change if there is just one system. But in a large global IT organization, with several systems and people who develop, problems may arise. If organizations don?t control change, change will control the organization.

Gamification är en strategi som använder spelmekanismer och spelkomponenter för att skapa motivation och engagemang hos användare av olika typer av system. Denna studie syftar till att undersöka om gamification kan användas för att motivera användare av system för tillverkningsindustrin.Studien har genomförts med en initial litteraturstudie och kvalitativa intervjuer med experter inom gamification samt utveckling av system för tillverkningsindustrin. Intervjufrågor har därefter ställts mot tidigare genomförd forskning, för att identifiera möjliga resultat.Resultatet av denna studie visar att spelmekanismer och spelkomponenter skulle kunna användas i ett system för tillverkningsindustrin, förutsatt att det finns ett tydligt affärsmål, mätbar och användbar data samt identifierade drivkrafter hos organisationens maskinoperatörer. Vidare har ett antal punkter identifierats som kan vara motiverande för en användare av system för tillverkningsindustrin:Möjlighet för operatörerna att följa utvecklingen i sitt expertområdeKartläggning av operatörernas drivkrafter, vilken därefter används för att förbättra operatörernas arbetssituation, med exempelvis mer givande uppgifterBelöningar som utdelas är matchade mot operatörernas preferenser, med syfte att vara mer effektiva som motivationsskapare.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This study focuses on the internal marketing and how it affects the complaints by companies? communication control. Our purpose with this subject is to increase the understanding of which components affects the relation between internal marketing, communication control and complaints. We have chosen the subject, internal marketing because it caught our interest in an earlier course. On the basis of the literature of costumer complaint there have not been so much research about it and that is why we have chosen this perspective on internal marketing.This study is based on a qualitative approach.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

A new site- and construction-law came into effect in May 2011. The new law, PBL2010:900 implies several different changes of the law. These changes concern bothconstructors, people working in municipality and county councils and other peoplethat in some way are related to the building sector. Except from the change in orderof the chapters and the renewed and modernized language, the law has now beenextended with a few new phases.According to the new law a certificate has to be issued to start and finish theconstruction; the construction consulting has changed name into technical consultingand the protocol for the controls has to show what the control is being compared to.This diploma work concerns control visits on construction sites as related to the newlaw. The reason why visits on construction sites are now implemented in the law isbecause the government saw a lack of trustworthiness in the old law.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.