Skälby park is situated approximately 2,5 km northwest of the central parts of Kalmar and is one of fi ve town part parks. Originally Skälby consisted of a village of four farms. In 1965 the municipality in Kalmar bought Skälby and the agriculture ceased to appear. The land was parcelled out into plots and new roads. Only the area surrounding the old buildings remained, turned to a park.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Syftet med studien var att undersöka samband mellan upplevelse av tandvårdsrädsla och smärta hos patienter vid tandhygienistbehandling. Ytterligare ett syfte var att undersöka om det fanns samband mellan kön och ålder i relation till tandvårdsrädsla och smärta. Studien genomfördes med användning av enkäter på patienter som behandlades av tandhygieniststudenter på Högskolan i Kristianstad. I studien ingick 78 respondenter, varav 39 män och lika många kvinnor i åldrarna 21-81 år. Enkäten bestod av två delar.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed.

I uppsatsen undersöks hur 11 globala miljö och/eller etiskt märkta fonder har presterat i jämfö-relse med 17 konventionella fonder i det svenska premiepensionsutbudet genom tillämpning av utvalda finansiella prestationsmått. Detta med anledning av att miljö och/eller etiskt märkta fonder har haft en stor framväxt under det senaste decenniet och det finns därför en efterfrå-gan av att klargöra ifall en pensionssparare behöver göra avkall på den finansiella avkastningen vid val av miljö och/eller etiskt märkta fonder. En jämförelse av det statliga förvalsalternativet och 10 globala miljö och/eller etiskt märkta fonder har även gjorts för att undersöka skillnaden av att vara en aktiv respektive passiv premiepensionssparare då antalet som inte gör ett aktivt val är omkring 50 procent. Resultatet visar ingen statistisk signifikant skillnad med avseende på den riskjusterade avkastningen mellan fonder som är miljö och/eller etiskt märkta och fonder som inte tar hänsyn till dessa kriterier vilket överensstämmer med tidigare forskning. I jämfö-relsen mellan det statliga förvalsalternativet och 10 globala miljö och/eller etiskt märkta fonder har det förstnämnda presterat på en hög nivå..

Hemoplus® (Sarstedt, Nümbrecht, Tyskland) is a guaiac-based fecal occult blood test developed for human medicine. Guaiac-based tests make use of the pseudoperoxidase activity of hemoglobin so the test is not specific for human hemoglobin and can therefore be used in veterinary medicine. Peroxidase-containing foods such as meat (hemoglobin and myoglobin) can cause false-positive results of the test. To ensure that a positive result is not caused by diet, it has been suggested that canine patients should be fed a meatless diet for a few days prior to fecal occult blood testing. The aim of this study was to evaluate the effect of commercial dog food on guaiac-based tests. In this study fecal samples from healthy dogs were analyzed with Hemoplus®.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

When harvesteing ley there is always mechanical losses from the harvest machines. During the last years the roundbalers with knives,cutting the material-are more common, This use increase the mechanical losses of material. MATERIALS AND METHODS The roundbaler which used in this test was a Krone Vario Pack 1500 Multi Cut. This roundbaler has 17 knives. The theoretical length of cut was 64 mm. During the test we stretched a rubber tarp under the balechamber and collected the materials which fell down from the balechamber.

To support uniform and fair assessment of Swedish students? English language competences, mandatory National tests are provided both for secondary and upper secondary education. The current thesis may be seen as a contribution to the further development and validation of these tests, with regard to the likely introduction of computerized testing methods. The aim is to gain further knowledge from current research in the field, to study and elucidate international experiences of implementation, and to gather and analyze feedback from students and teachers. Based on my findings, some tentative conclusions will be drawn, and recommendations made concerning future developments.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The purpose of this study was to investigate the relationship between Health Locus of Control, Exercise habits, Food habits and Self-esteem (Personal self and Physical self) between two groups of student teachers at a university in the south of Sweden. Is health such as exercise, eating and self-esteem something that is controlled by internal or external factors? Student teachers that participated in Physical and Health programme and student teachers that participeted in other programme were investigeted. The participants (N = 160) answered the questionnaire. The Health Locus of Control scale and Tennessee Self-Concept Scale were used.

Organisationspsykologi kan ibland upplevas allt fo?r problemorienterad med stort fokus pa? just problem och konflikter i organisationer. Det finns dock en inriktning pa? de fo?rha?llanden och processer som bidrar till att ma?nniskor, grupper och organisationer kan frodas och fungera optimalt. Denna studie syftade da?rfo?r till att underso?ka eventuella samband mellan positiv feedback, self-efficacy, locus of control och socialt sto?d.