Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

AbstractC-level essay in political science, by Frida Orlinder, spring semester 2008Supervisor: Susan Marton?Good contracting? ? A study of contracting in public procurement regarding the transportation of school children?Over the last decades models influenced by the market have been gaining influence in public administration all over the world. New Public Management has been presented as a theoretical ?shopping basket? from which concepts can be applied to the administration of municipal services. The purpose of this essay is to investigate in an explorative way how New Public Management (NPM) views contracting and the role of the internal customer in contracting.

The thesis of this work has been to investigate the information behaviour of archaeologists. Interviews were made, between March-September 2002, with ten archaeologists, employed in one Swedish organisation, conducting rescue archaeology. The archaeologists were all experienced in working positions as project leaders. Our thesis could be expressed in following questions: - Which sources of information did the archaeologists use in their work? - Which external and internal factors had influence on the information behaviour? The results of this study have been analysed within a theoretical framework of T.D Wilson, Lars Seldén, Lars Höglund and Olle Persson, among others.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

Reptiles are animals than have been neglected in the research for all times. Some people have the opinion that these animals have fewer needs and demand less from their caretakers. The Aldabra Giant Tortoise lives on the Aldabra atoll outside the coast of Tanzania. The Aldabra tortoise population has varied throughout the years, but today the population is around 100.000 animals. The purpose of this study was to analyze the enclosure utilization of two Aldabra tortoises, a male and a female, at Parken Zoo in Eskilstuna, Sweden.

The climate at the labour-market in Sweden today means that students who have recently passed their examinations find it quite difficult to find work. The competetiveness calls for a strategy to find advantages in the employment process. The strategy explored in this thesis is called personal branding. We believe that by building a strong personal brand you can increase the possibilities to influence the decisions of those responsible for recruitments in our society. The question we ask ourselves in this essay is how to build a personal brand with the power to give students a competetive advantage in the employment process.

Warthogs live under natural conditions in matriarchal groups, bachelor groups and yearling groups. Just like all pig species do warthogs have a complex behaviour repertoire. The semi-wild warthog population at Kichwa Tembo Lodge, outside Masai Mara National Reserve, lives in a fenced area with access to food all over the year and is protected from predators. The aim of this study was to observe the male warthogs? mating behaviour and their hierarchy during the mating season.

Lean production is the name given to Toyota?s Production System (TPS) by the west. The continuous improvements of their operations through Lean has made Toyota into the largest car manufacturer in the world. This, in turn, has led to several studies regarding both Toyota and their system as to find ways to apply Lean in other organizations. Even so, over 90 percent of all companies fail to implement Lean.

AbstractIn this study eight caregivers, all with long experience from working in nursing homes for people with dementia, were interviewed.  The aim of the study was to describe the caregiver?s experiences in caring for people with dementia and Behavioral and Psychological Symptoms of Dementia disorder. Data were processed by qualitative, inductive, content analysis. The results were presented in four categories: To connect, Two days are never the same, Being calm and giving time and All are needed. The result showed that caregivers met a variety of difficult and varied tasks in nursing.

Because of among other things the globalization and a focus on core competencies knowledge has become very important for the companies of today, especially for research-intensive companies. The problem is that the companies become more sensitive to how knowledge is created and spread, that is, how organizational knowledge is created. Especially sensitive are companies who are small, young and research-intensive. The purpose with this thesis is to explore how organizational knowledge is created in small, young and research intensive companies.The theory is based on a five-phase model of organizational knowledge creation and four modes of knowledge conversion described by Nonaka and Takeuchi (1995). These concepts constitute the foundation of the analytical model used in the thesis.The study is carried out by qualitative, highly structured interviews with low standardization.

To meet the needs and demands of the costumer, accurate information about how much is available in stock is necessary. When the information in the system does not match the physical inventory, inventory inaccuracy occurs. Inventory inaccuracy is common among companies and may contribute to increased labor cost, excess inventory, production disruptions, waste of time, late deliveries, poor service and lost customers.The purpose of this study is to identify contributing factors to inventory inaccuracy for business with outdoor storage. The study also aims to investigate how efficiency factors can reduce the inventory inaccuracy for business with outdoor storage.A case study was conducted to answer the purpose. A company in the steel industry was chosen to examine inventory inaccuracy on business with outdoor storage.

Background: The need for palliative care at home hasincreased in recent years as more people wish to die in their own homes. Toperform good palliative care by addressing patients' needs and desires of lifecare requires a better understanding of how nurses experience palliative careat home. Aim: The aim of the study was todescribe nurses experiences of caring for patients in palliative care in homecare. Method: The method was asystematic literature review and the article search resulted in elevenqualitative articles. An inductive qualitative approach was used where nursesdifferent experiences was identified. Results: Our results are reportedunder two themes:Opportunities and Barriers. Palliative carein home care experiencedby nurses in variousways in which personalgrowth, experience, guidance,trustful communication, cooperation and self-knowledgewas opportunies thatemerged. Barriers experienced by nurseswas ineffective communication,lack of time and abuseof power in palliative care at home.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.