The thesis has been made for NCC Teknik in Gothenburg. The NCC Corporation is one of the largest leading companies in Scandinavia within the construction industry. NCC is active throughout the whole construction process, where one part is to carry out soil investigations prior the construction of various buildings, for example residential buildings. NCC Technology wants to visualize the samples taken at the construction sites in 3D for clients, authorities and also internally to show in a simple and understandable way how contamination is spread out in the soil.The thesis includes the area of Limhamns läge in Malmö, previously an industrial area. The area has previously included a concrete factory and the contamination from that factory has lingered in the soil.

Soils in a metal contaminated site on Stångberget in Gusum in southeastSweden were investigated and compared to relatively unaffected soils a fewkilometres away. Pollution came from historical release of untreated flue gasesfrom a brass mill. The objective was to find information on how high the metalconcentrations are, if metals from the polluted soil affect the surroundings andif the metal contamination affects the microbial community. The soil wasinvestigated using several different methods, such as field XRF measurements,chemical analysis of metal, carbon and nitrogen content, pH, acid neutralizingcapacity, texture, soil depth, field leach tests, sequential extraction and microbialfunctional profiles. The study showed that copper and zinc concentrationswere above Swedish Environmental Protection Agency guidelines for lesssensitive land use on the entire investigated area.

The freshwater pearl mussel Margaritifera margaritifera is an endangered species. To survive, the young mussels demand a fairly coarse bottom material containing an appropriate quantity of organic substrate to survive without suffocating. In order to estimate if a bottom is suitable for juvenile mussels, samples of the sediment are needed. To obtain samples a sampling device called the Mulv collector has been developed within this project. Bottom samples were collected from 18 stations in 4 south Swedish streams, Vramsån, Kling-storpsbäcken, Brönnestadsån and Bräkneån.

The aim of this study was to examine the amounts of heavy metals in the sediment of a wetland constructed for stormwater treatment. The wetland is called Vattenparken and is located in the city of Enköping. The heavy metals which were analysed were Pb, Cd, Ni, Zn, Cu, Cr and Hg. The total metal concentrations were determined using HNO3 chemical extraction. From 8 sampling sites 5 sediment cores were taken.

The eutrophication of lakes and seas with the algal bloom and deficiency inoxygen that follow, has been given priority by the Swedish government as oneof 16 environmental objectives. The purpose of this project was to develop a toolbased on a simple model, limited amount of data and geographic informationsystem (GIS) to identify areas with risk for phosphorus losses due to surfacerunoff. This tool can act as a decision support to decide where appropriatemeasures should be applied with the aim of reducing phosphorus losses and bythat the eutrophication.The method that has been used is a combination of two models, one calculatingthe potential erosion while the other one identifies areas of erosion (net erosion)or deposition. This ability is of great importance because potential erosionshould be calculated on areas with net erosion. Areas with high potential erosionhave an increased risk for phosphorus losses due to surface runoff.The potential erosion was calculated based on factors which describe how topography(LS), land use (C), soil type (K) and precipitation (R) effect the erosion.All of them have been modified to a greater or lesser extent.

AbstractSurface-water includes different kinds of pollutants from traffic and roads. To prevent these pollutants to reach nearby lakes one can construct surface-water ponds on locations with heavy traffic. At Bergviks shopping centre in Karlstad, two ponds, one smaller and one bigger has been constructed in order to decrease the pollutant pressure from the receiving waters of Kattfjorden. Several heavy metals are essential for plants and animals in low concentration but when they occur in higher concentrations, they become toxic to the organism. The larger pond at Bergviks shopping centre has a sedimentation function so the heavy metals sink to the bottom thereby not releasing directly in to Kattfjorden.

In this paper we have studied possible future uses for Additive Manufacturing (commonly referred to as 3D-printing) in Space. More specifically we have sought to establish how Additive Manufacturing can be used to construct structures on the Moon. Our studies have shown that Additive Manufacturing has great potential for establishing colonies on not only the Moon, but perhaps even further away from our home planet. With Contour Crafting-technology in combination with ISRU (In Situ Resource Utilization) we could, with material already present in the sediment layers of the Moon, construct advanced structures without having to transfer any extra material from Earth. This would lower the costs of establishing a colony on the Moon to such extents that it could actually be fiscally possible..

Fusarium head blight is a large problem world wide which reduces the yields and the quality of small grains. Shrunken kernels with decreased thousand kernel weight as an effect and pro-duction of mycotoxins are some of the problems caused by infection of Fusarium spp. To avoid toxin contaminated bulks to enter the food and feed chain it is important to have tools for prediction and analysis of the fungi and toxins. Good prediction methods are also impor-tant in the breeding industry since early identification in trials of lines with high resistance or susceptibility simplify the work. To compare different techniques for these objectives this project was initiated.

Fusarium head blight is a large problem world wide which reduces the yields and the quality of small grains. Shrunken kernels with decreased thousand kernel weight as an effect and pro-duction of mycotoxins are some of the problems caused by infection of Fusarium spp. To avoid toxin contaminated bulks to enter the food and feed chain it is important to have tools for prediction and analysis of the fungi and toxins. Good prediction methods are also impor-tant in the breeding industry since early identification in trials of lines with high resistance or susceptibility simplify the work. To compare different techniques for these objectives this project was initiated.

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

This thesis? objective is to evaluate the recently proposed Shy (2002) approach of estimating consumer switching costs. We apply Shy?s method for estimating switching costs on the Swedish markets for bank deposits and telecommunications. The evaluation has been achieved by comparing estimated results to economic theories, related empirical studies, and our expectations.

The manor Fållnäs gård is situated at the northern end of the bay Fållnäsviken, c. 12 km north-west of Nynäshamn, Sweden. A 300 cm long sediment core collected in the bay has been analyzed regarding pollen stratigraphy. AMS 14C dating of terrestrial macrofossils indicates that the sequence covers the last c. 5400 years.The aim has been to study vegetational changes, especially human impact, in the surroundings of Fållnäs gård.

Evaluations of open Ditch status and function, with an assessment of suitability of a conversion to a two stage ditch as a low maintenance alternative. To illustrate Swedish drainage problems this work focused on two agricultural drainage associations assessed in detail with a new method called MADRAS (Minnesota Agricultural Ditch Reach Assessment for Stability). With the assessment of the MADRAS method estimates were made to conclude the ditches operating problems. This was made through measurements of sediment depths, mass bank failures etc. in order to quantify ditch problems and propose practical actions for improved ditch stability and water quality. The MADRAS surveys were conducted in two main ditches that drains 2900 hectares of land on the northern shores of Mälaren. In the study measurements of the ditch cross-sections were also conducted to compare actual profiles with the original map profiles. The evaluation showed that parts of the studied ditch sections were operatively poor; main reason was mass bank failure, undercut channel banks, sediment aggregations and narrowed ditches. The profile survey shows that a majority of the profiles 80 % has sediment accumulations there remains only 64 % of the original profile from the map.

The freshwater pearl mussel (Margaritifera margaritifera) is threatened throughout its range. There has been a substantial decline of the species and one major reason is habitat degradation. We investigated how the substrate composition of the bottom floor affects the regeneration of the mussel by analyzing data from the Västerbotten County Board?s inventory of the freshwater pearl mussel. The results implied that fine material such as fine sediment and sand might be detrimental to regeneration whereas gravel and boulders and in particular stone seem to be beneficial.

As reptiles are becoming more common as patients in veterinary clinics, there is a need for creating new procedures regarding the care of exotic pets. The aim of this study was to develop a wound care routine adapted to reptiles, which can be used independently by a veterinary nurse due to the absence of prescription drugs or surgical techniques. The study was conducted by compiling the available research regarding wound care in reptiles, as well as research from related fields. The result indicates that polyurethane films and chlorhexidine-alcohol may advantageously be used on these patients. Hydrocolloid dressings and silver sulfadiazine dressings have adverse effects on wound healing and should not be used routinely in reptiles.