Chemical substances are spread diffusely and uncontrollably as a result of the increased Consumption of goods. REVAQ is a certification system that works to reduce the flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

The end of the 20th century brought a dramatic change to the music industry. The then predominant models for music Consumption and sales were forever altered when the possibility to distribute music over the internet emerged. It has now become evident that it is virtually impossible to stop the distribution of digital music files. Music has turned into a non-excludable and non-rival product, which in economic terms is described as a public good. Public goods theory serves as a starting point for this study, which explores some of the factors that might explain why some consumers pay for music, while others choose to download music illegally.

Background: Oil is the most dominating source of energy of today, it constitutes for more than 40 per cent of the worlds total energy Consumption. This together with the fact that stock in oil companies has soared on the stock exchanges around the world makes oil a very interesting topic to write within. In order to gain knowledge in how to value oil companies, the authors will collect information from theory and through a questionnaire. By applying the information gathered to three companies listed on the Stockholm Stock Exchange the authors will reach an objective picture of valuation of oil companies.Purpose: To investigate how shares of stock are valuated in the oil exploring and producing industry, and what specific measures and metrics that are used in the valuation of stocks in Exploring and Producing (E&P) companies.Method: By using a qualitative approach for this thesis, the authors will investigate how the valuation of oil companies works and what measures that should be applied. The authors will use a part descriptive and part explorative study.

The aim of this thesis is to try to make the mathematics content of textile handicraft visible. This is done through an attempt at integrated studies in the two subjects with 6th grade students.The main question is: In what way may integrated studies in mathematics and textile handicraft lead to making the mathematics content of textile handicraft visible to the students? This question has been divided into three sub-questions: 1. What knowledge do students have on the order of the millimeter, centimeter, decimeter and meter units of length?, 2.

This thesis consider alternatives for heating and cooling planned office buildings at Arlanda airport. The thesis is divided into three parts where the third part is a shorter synthesis of the two first. In the first part the energy demands of the buildings are modelled in a computer program. Two different building models are created, one more conventional and one with good energy properties. The results shows that with proper construction and ventilation systems etc.

This thesis was commissioned by Volvo Powertrain, where manufacturing and assembling of transmissions is performed, which is used in the company's trucks and buses. The thesis has consisted of a case study that intends to study the problem areas in the current proposed activities and continuous improvements in the assembly department in the Volvo Powertrain facility.In the current situation, the proposals that are submitted by the employees suggest mainly minor improvements. The proposals concern for example, labelling of materials boxes and holders for tools, which do not generate any significant profit for the company. Directors and executives want an increased amount of proposals with a more results-oriented type, in terms of reduced costs, time Consumption and stops, and improved quality. The company would also deal with the problems that arise when implementing improvements in the production.

Syftet med detta examensarbete är att sammanställa maskinkostnader för etableringsmetoderna plöjningsfritt och konventionellt. Vi vill även titta på hur stor kapacitet som behövs på maskinparken för den tänkta gården på 600 ha åker, detta för att hinna etablera grödan inom ett rimligt tidsspektra. Anledningen till att vi valt ett företag på 600 ha är att det är den areal tröskan klarar av att avverka inom rimlig tid. Det medför att vi måste ta en del hänsyn till lägligheten och hur mycket av tiden som är så kallat ?tjänligt väder?.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical Consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

Syftet med studien var att testa ett nykonstruerat instrument för att beskriva grad av självtillit till att avstå från sockerhaltiga livsmedel i olika situationer. Syftet var även att beskriva vuxna individers intag av sockerhaltiga livsmedel samt att beskriva skillnaden mellan sockerintag och självtillit. Urvalet bestod av 62 patienter som kommit för undersökning eller behandling till privata och folktandvårdskliniker. Data samlades in via enkät. Resultatet visade att 16 (26,2 %) individer åt sockerhaltiga livsmedel minst en gång per dag och 45 (73,8 %) åt sockerhaltiga livsmedel mer sällan än en gång per dag.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

Urban density is not new, but rather one side of the continous processes of change underway in the city. During the urbanizing boom of the industrialization, when the cities grew bigger, the first spaces to be built on were vacant and planted areas in the interior of the district. The gardens that once were there were replaced by yardhouses. The idea of urban density is that a dense city means less distance between residential areas and workplaces, resulting in fewer shipments and travelers, which ultimately leads to lower energy Consumption and lower emissions. Urban density may lead to shorter distances, but not necessarily. In the wake of urban density the greenstructures of the city is shattered. The possibilities for green areas to contribute to the health of the city and its inhabitants is dramatically reduced.

Den svenska klädimporten har ökat dramatiskt och vårt samhälle har förändrats till ett konsumtionssamhälle där vi shoppar efter ?köp och släng? istället för ?slit och släng?. Den ökade klädkonsumtion är ett omdiskuterat samhällsproblem och mode är en färskvara som uppdateras i en allt snabbare takt. Ett stort utbud tillsammans med de låga priser som klädmarknaden är uppbyggd av uppmuntrar till impulsköp vilket gör det allt svårare för kunden att fatta medvetna köpbeslut. I denna studie kommer vi att utgå från Armstrong och Kotlers modell av köpbeslutprocessens som är uppbyggd av fem steg som innefattar hela processen.

The global wood pellet market has seen a rapid growth after the adoption of the Kyoto protocol and the renewable energy incentives created within the European Union. The global Consumption of wood pellets reached 13,5 million tonnes in 2010 and several experts estimate the Consumption to be between 35-50 million tonnes by 2020. These forescasts raise the questions which regions that can supply this vast amount of wood pellets and what the conditions are for producing it. This study evaluates the conditions for wood pellet production and export from British Columbia, on Canada?s west coast, focusing on existing industry structure, raw material supply and the distribution chain.