Sweden has today the highest moose (Alces alces) population in the world. The population has been very high since the late seventies and in the beginning of the eighties there was a big ?moose explosion?. The main food source for moose during the winter is young pine (Pinus sylvestris) and birch (Betula spp.). The high moose population has therefore lead to high damage on pine forests over big areas.

Energy consumption is at present a major political issue, and numerous projects that comprise many nations are currently in process to increase energy efficiency and bring down energy dependency. As a member state of the EU, Sweden now faces the challenge of implementing substantial energy-saving measures until the year 2016. One of these measures is the project ?Green Islands? financed by the EU that intend on creating sustainable islands in areas around the Baltic Sea. The Archipelago Foundation leads the project that concerns the Stockholm archipelago, where focus has been placed upon decreasing energy usage in businesses and services on Utö among other islands.

This thesis is an evaluation of a new design concept for statorfeets in Gallejaur hydro power plant. Founder of the work is Vattenfall AB Vattenkraft. During the 70- and 80´s nuclear power began to be phased in to the Swedish grid, which meant that hydropower became an important source of rules. The generators began running in so called intermittent operations instead of basic operations, which meant 300-600 start/stop per year instead of one-ten numbers start/stop per year. In order to deal with the thermal forces that arise at every start and stop suppliers began to mount so called sliding joints, which is to take advantage of these forces and maintain the stator shape.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Intense competition among companies and luck or unavailability of certain resources in country of company?s origin force last to cross the borders, and start to hunt for new markets and cheaper inputs. However, by investing abroad the company is not only facing and dealing with cultural differences and new regulatory framework, but also becomes dependent on decisions and actions of different and to large extend unknown government. Moreover, the majority of the investments? flows are directed to developing countries, where power and capabilities of state authorities are considered to be more extensive than in countries of developed economies.

Overdue cleanings have for a long time been an important topic of discussion within the forestry sector. When stands that have not been pre-commercially thinned are reaching the level of commercial thinning, many problems occur in terms of decision-making and economical outcomes. These types of stands are commonly known as conflict-stands. The work was carried out partly as an interview survey towards representatives from the forest sector and the energy sector, partly as a case study of conflict-stands situated in Böksholm, north of Växjö and in Tönnersjö east of Halmstad. The criteria for the studied stands were that they had to be dominated by Norway spruce and be in a severe status of ?conflict?. The aim of the interview was to get an overview of the situation today, and also analyse trends in terms of conflict stands.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

The municipality of Västervik, with support from Envipro Miljöteknik AB, is carrying out a main study of the minefields at Gladhammar. Mining of iron, copper and cobalt under different periods from the 16th century until the end of the 19th century has led to discharges of metals to the lakes situated downstream. The aim of the main study is to investigate the possibilities to reduce the environmental load on the surrounding ground and water caused by heavy metals from the mine. The present report is a part of the main study. The aim of the work is to investigate the geochemistry of the groundwater.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Increasing the use of biofuels is an important part of achieving the EU?s target of 10 percent renewable energy in the transport sector. However, the competition between biofuels and food production is an ongoing concern. Also, several studies have indicated a significantly higher climate impact than was earlier estimated, due to emissions from land use. In Sweden, both the use and production of biofuels from crops have increased substantially during the last decade. The purpose of this project is first to present an overview of the Swedish land use in all sectors.

Government regulations and customs duties restrict the import of trucks to some of the markets to which Scania tries to sell their trucks. The distribution problem due to these regulations is solved by the foreign assembly department, KD, at Scania. This means that competence is needed and costs are added not related to Scania's core operations.The aim of this master thesis has been to analyse and to evaluate alternative ways of managing the packing operations considering cost, quality and work organisation. To study and examine the work methods and operations of today and also to present methods measuring the operations effectiveness and productivity.We have used the system approach to maintain totality and to understand the component's relation to this totality. Field studies combined with studies of relevant literature and studies of other companies operations have given us the knowledge and the understanding of the packing operations needed.

AbstractA master thesis in business administration 30 hp, Jönköping International Business School, Spring semester 2012.Authors: Sarah Henningsson & Jim BörefeltSupervisor: Urban ÖsterlundTitle: Commercial real estate investment ? Factors from an investor perspectiveBackground and problem: In this study, we focused on the real estate investor and the factors and issues that may arise and affect real estate investment decisions. It has been put in relation to the other parties in the process of assessing and affecting real estate investment decision. The parties that we studied are real estate investors, banks, brokers and appraisers.Purpose: This study aims to describe and explain the factors that affect commercial real estate investments for investors, credit assessment conducted by the bank and valuation made by the broker and appraiser.Delimitations: We have chosen to limit the study to commercial real estates including residential, retail and office properties, industrial properties and combinations thereof. Agriculture buildings and forestry plots are not examined.

Background and research problem: The former highly inflationary property market is currently undergoing a stagnation process. Investors have been used to annual growth figures in double digits,but now this is no longer considered to be a realistic outlook for future years. According to a report from PriceWaterhouseCoopers and Urban Land Institute, published by Avanza Wealth Management,the three most attractive markets for property investment in Europe are London, Paris and Stockholm. Because of this the authors have focused their investigation on two companies in the London andStockholm. The authors will additionally use an international bank, an estate agent and a consultancy firm for further information, with regards to the property market and risks associated with these typesof investment in particular.

AbstractA master thesis in business administration 30 hp, Jönköping International Business School, Spring semester 2012.Authors: Sarah Henningsson & Jim BörefeltSupervisor: Urban ÖsterlundTitle: Commercial real estate investment ? Factors from an investor perspectiveBackground and problem: In this study, we focused on the real estate investor and the factors and issues that may arise and affect real estate investment decisions. It has been put in relation to the other parties in the process of assessing and affecting real estate investment decision. The parties that we studied are real estate investors, banks, brokers and appraisers.Purpose: This study aims to describe and explain the factors that affect commercial real estate investments for investors, credit assessment conducted by the bank and valuation made by the broker and appraiser.Delimitations: We have chosen to limit the study to commercial real estates including residential, retail and office properties, industrial properties and combinations thereof. Agriculture buildings and forestry plots are not examined.

The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest.Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage.