The aim for this study was to find out what strategies women use to not react against inequality and sexist prejudice. In the study I used a critical realistic approach through, primary, the social ontology presented by Margaret S. Archer. The study focus on both the women?s construction of femininity and their construction of masculinity and what directions it constitutes for the women?s social orientation.

With the growth of information stored over Internet, especially in the biological field, and with discoveries being made daily in this domain, scientists are faced with an overwhelming amount of articles. Reading all published articles is a tedious and time-consuming process. Therefore a way to summarise the information in the articles is needed. A solution is the derivation of an ontology representing the knowledge enclosed in the set of articles and allowing to browse through them. In this thesis we present the tool Ontolo, which allows to build an initial ontology of a domain by inserting a set of articles related to that domain in the system.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

This thesis examines the tendering process from the point of view of Swedish building contractors. The purpose with the study is to chart the decision process for the contractors during the tendering process. The study is designed as a survey study. This made it possible to reach a wide base of respondents, not letting such factors as geography being an issue. The survey itself was characterised by a very high response rate compared to other similar studies. The result from this study shows that former experience from similar projects, current workload and the clients economic condition are very important factors for both whether or not the contractor will bid for a project as well as the cost estimation and tendering price. Former experience from similar projects is also an important factor for the determination of the indirect costs.

Det har blivit allt dyrare att bygga i Sverige, den svenska byggnadsindustrin har halkat efter övrig producerande industri och byggföretagen måste börja tänka i nya banor om de ska klara de nya utmaningarna. Lean-tänkande har länge nyttjats inom den tillverkande industrin och byggföretag har på senare år börjat snegla på dessa koncept i syfte att öka sin produktivitet. Problemet är att byggindustrin inte har homogena produktionsmiljöer och därmed inte kan använda samma lean-koncept som exempelvis bilindustrin. Därför har ett nytt koncept som kallas Lean construction utvecklats som bygger på ett antal principer från traditionella produktionssynsätt (Koskela, 2000). Konceptet är relativt nytt och forskningen inom området har främst fokuserat på lösningar på specifika problem istället för att skapa förståelse för konceptets helhet.

This essay revolves around partnerships established between local authorities and civil society to promote integration in segregated urban areas. The main focus is on who is active in formulating the local integration policy in these partnerships. The analysis is based on qualitative interviews with representatives from the local public administration and from different parts of civil society in Rosengård and Södra innerstaden in Malmö. The conclusion is that local authorities to a large extent decide the content of integration policy. The authorities, in having the major responsibility of the integration projects, decide what parts of civil society to involve and what projects will promote integration.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this master thesis has been to explore how Skanska Installation can be organized and managed from a Feedback of experience perspective, and define how an IT solution for knowledge management can be designed by identifying the company's current needs in communications, structural capital and information management.The study follows a deductive approach with a qualitative starting point. Using the literature  studies  the theoretical references were built, which is of great importance when using  a deductive approach.Furthermore the report is based on a case study on two different projects: Herrgården and Nattsländan. With the collected empirical data from the case  study the analysis was carried out with the theoretical framework as a basis. This finally led to the conclusions of the study.The purpose of a communications plan is to show how the communication between employees must be managed to best move the project forward. Emphasis is placed on the formal and informal communication of the company.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

The number of ideas at innovative companies usually exceeds the amount of available human ormaterial recourses, this include ideas for development of new products. Since they are not able to doeverything they want to do they have to choose between ideas to develop new products. This includesthe decision on when to start, stop or kill a project as well as the thought process of prioritizing betweenongoing and potential projects.Project Portfolio Management (PPM) is an organizational process, with the purpose of systematicallyorganizing and running the activities that aim to evaluate, select and prioritize ideas and projects fordeveloping new products. PPM include four major goals to be fulfilled; Maximizing Value of thePortfolio, Achieving a Balanced Portfolio, Achieving a Strategic Alignment and Running the RightNumber of Projects.The purpose of the thesis was to develop a more visual and formal PPM process for the early stages inproduct development in one department at St Jude Medical AB, Sweden.The thesis was conducted by following a methodology known as Process Modules. The methodology isan approach for developing a PPM process that fits a specific company.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.