This report addresses the growing need to adapt the medical healthcare to the new possibilities that can be accomplished by incorporating a web aspect to the personal treatment plans of patients. It describes what implementations that need to be considered in order to successfully convert to a partially web-based treatment.The report also reflects the potential economical gain that can be made by keeping the communication between the patient and the doctor frequent. It also takes into account the personal gain to the patient by increased feedback and easier ways to communicate with their attending physician and thereby increasing the quality of their healthcare and service.The construction of a prototype of the system required is also included in the report as a description of construction and functionality of the prototype along with results and estimated outcome..

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

User participation in the planning process of renewing the yards of existing residential areas was introduced in Sweden in the 1970s. It arose as a solution to many of the problems which became common in the residential areas built within the Swedish million program. The aim with the million program was to build one million homes within ten years. The same year as the million program was completed, in 1975, government subsidies to improve the residential yards were introduced. One of the conditions to get the subsidies was that the residents had to be involved in the planning process.

This thesis examines a project that has been conducted at a software development company. The aim is to investigate which problems firms of this kind faces performing projects. We choose a theoretical frame consisting of a modern view on how to manage projects. The view argues that the management of each project has to be adapted to the situation at hand. This theory is divided into two separate streams of reasoning; one emphasize learning, delegation of responsibility and flexibility, while the other argues for control, time planning and the importance of keeping to the plans.When we compare the theories to the case we draw three main conclusions: A thorough phase of investigation is required to produce the necessary planning documents.

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

How do museums work with plurality in their organizations and in the production of exhibitions and other activities? This paper examines how civic museums, provincial museums and state museums work with plurality from a perspective of culture policies, particularly in relation to the government bill Tid för kultur, issued by the Swedish government in 2009.All together I examine 25 museums and their efforts to include marginalized groups in their activities and exhibitions. To do so I have studied four possible measures that are available for the museums. This includes the following: projects that pay attention to a marginalized group or their living conditions; projects that are specifically created for a marginalized group; projects that include a marginalized group in the museums preparations; and projects were museums give full responsibility to a marginalized group. I have also examined how plurality have been presented ? as isolated cultures and cultural expressions or as hybrids and interchangeable phenomenons ? and to what extent the museums are ready to involve marginalized groups in their physical environment and in their exhibition and activity programs.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

With this paper my aim has been to investigate my subjectivity and responsibility as a landscape architect and to find ways to relate to it and handle it in my work. When I advocate a certain concept for a project, I influence the outcome, and in doing so I take on a personal responsibility. Even though my judgement is built upon facts and cooperation with colleagues and other consultants, I am always responsible for the part I play and how I affect the course of action. To what extent can I advocate my view and is it actually my responsibility to do it? How is my subjectivity part of my knowledge and influence as a landscape architect? I have interviewed three well known Swedish landscape architects to have their view on the matter. Since they are all strong individuals with huge experience and influence, the personal responsibility they bring upon themselves for their design action is as important. I have also used one of my own projects as a case study, analysing my design and standpoint and my relationship to the client to illustrate how these questions emerge even in the smallest projects. In the last section of the investigation I have searched for clues in diverse literature. This section is divided into three view points; the society, the profession and the individual..

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.

How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.

AbstractThe purpose with this essay has been to gain a greater understanding and clarify how an arena can create value within place marketing and development of a place brand. This will be achieved through a description of which values an arena causes in the surrounding areas and an understanding of how these values can be interpreted through the place brand. We decided to base our study according to the following two questions:1. What are the underlying reasons why there has been such a big trend with arena project?2.

During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.