This report aims to suggest recommendations that will increase the efficien¬cy in theconstruction process of a construction project. Through interviews, studies of budgetcalculations and examples given by the project management at the construction sightsan understanding of some complications have been gained. These complications havebeen tracked back in an attempt to find the source of the problem, and at the end ofthe report some suggestions have been presented with the pur-pose of preventingthese complications. Through the interviews it is suggested that many complications re-late to lack ofcommunication and motivation due to poor planning be-fore and during theconstruction process, a suggestion that is supported by the study of the budgetcalculations. The examples from the project management also points out someshortages in planning, but also coordi-nation related complications due to lack ofcommunication. To prevent these problems the recommendations suggested at the end of thisreport aims to improve the planning process through a properly fulfilledwalkthrough-planning of all of the construction activi¬ties during the time needed todo so. It is also suggested that the company uses experience from previous projects inorder to reduce costs, and that the qualifications of the employees is being appliedwhere it is needed.

The task given to us was to develop an industrial wheel with new thinking in terms of fresh design and construction, with the ability to brake. While the produced wheels of today only own the property of total braking, a wish was made to integrate the ability of directional locking.The time spent working with the project has been filled with multiple sketches of ideas and function analysis.Choices of material and ways of construction have been verified by calculations, tests and prototype building. The goal of this thesis has been to develop a unique caster with well thought-out design that would be adaptable to different areas of applications.The result was a hubless wheel with the ability of directional locking before total braking.A prototype of the wheel has been made to show the design and functions..

Choosing a new plastic material for a container includes several different steps. In this case,the Finnish company Hackman needed a new type of packaging material for theircutlery- and kitchentool series »Hackman tools«. The project was carried out in cooperationwith the design agency Ytterborn & Fuentes, which has Hackman as a client.Several different demands were put on the material in order to fulfill as many of the clientswishes as possible. The most urgent problem with the existing container was the difficultysfor the customer to clearly see the contents in the container. Because of this problemthe customer tried to open the container in the shop.

School and education are topics that are frequent in Swedish media. The intention of this essay has therefore been to investigate the image of teachers and their profession in Swedish daily press. The overall aim has been to analyze how teachers are portrayed in the debate that followed the TV-show Klass 9A, and by that find how the debate defines the concept of a good teacher. The representation that was found was then compared to earlier studies. The series was shown on Swedish television between January and March 2011.26 articles were chosen and the ambition was to have various perspectives represented, such as different voices and also papers from different areas of the country.

The aim of this study is to investigate how the Swedish language proficiency of pupils in vocational programmes in 1977 was measured and assessed with the aid of a national achievement test, and to investigate whether vocational pupils today, in 2014, have similar language proficiency to that of pupils in the 1970s. The study also discusses how the design of the national achievement test from 1977 reflects the view of knowledge that prevailed in society and in the policy documents. The material for the study consists of a total of 75 national achievement tests, 40 of which were taken by pupils on a vocational programme in 1977 and 35 by pupils on a vocational programme in 2014. The national achievement test consists of two parts, the first of which focuses on isolated elements of language proficiency, while the second involves free text production. The material was analysed quantitatively in accordance with the correction material from 1977.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

Our Bachelor?s Thesies has been performed in co-operation with Cellplast Direkt AB inLaholm. Our task was to develop a construction that cuts gussets to ceiling disposition as isused to isolation.Our goal with our construction was to increase the degree of automation so that theproductivity increased and also meet the market which is getting tougher and tougher due tothe future business cycle.Cellplast Direkt gave us free hands in order to enable new ideas. A pair different principleproposal was developed and prepared to a final structure.The Bachelor?s Thesies resulted in one PLC - governed machine with three engines that runthree different moves, wich does that the degree of automation increases and the risk forerrors decreases.We have developed a complete production bases to Cellplast Direkt and our hope is that thecompany comes to produce the machine in the future..

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Titel: Investeringsuppföljningar ? En fallstudie på Volvo Construction Equipment i BraåsSeminariedatum: 2011-06-01Ämne/kurs: 2FE13E:3Författare: Aleksandar Stamenkovic och Donald BergströmHandledare: Anders JerrelingExaminator: Fredrik KarlssonNyckelord: Post-audits, Capital Budgeting, Investments, Performance Evaluations, ROI, RI, AARRSyfte: Syftet med detta ämnesfördjupande arbete är att förklara de problem som uppstår när avsaknad av investeringsuppföljning föreligger, samt att förklara för hur rutiner av uppföljningar kan organiseras.Metod: Valet föll på att göra en kvalitativ fallstudie gällande Volvo Construction Equipment i Braås. Kvalitativa semistrukturerade intervjuer har utförts med fyra stycken respondenter på anläggningen. Detta ämnesfördjupande arbete har utförts enligt en deduktiv metod och en diskussion förs angående arbetets validitet och reliabilitet.Teori: Den teoretiska referensramen behandlar relevant teori gällande investeringar och uppföljning, vidare behandlas även kortfattat de metoder som används för att bedöma investeringars lönsamhet på Volvo Construction Equipment i Braås.Empiri: Det empiriska avsnittet redovisar data från de semistrukturerade intervjuerna som fördes med personal på anläggningen i Braås. Dessa bestod av ekonomichefen, controllern samt två projektledare.Slutsats: Resultaten som presenteras behandlar komplexiteten med att följa upp investeringar enligt dess faktiska kassaflöden och förkastar därmed en sådan uppföljning för Volvo Construction Equipment i Bråas.

To be able to feel a sense of belonging, people need to have the possibility to take part of the information from the society. Hearing-impaired don?t have the same possibility as hearing people when they want to take part of the information, therefore they don?t get the same benefit. This contributes to a feeling of not belonging and a sense of limitation in different social occasions. Therefore the society needs to be accessible to everyone regardless disability.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

Abstract This essay is about girls that have chosen a gender atypical education on a gymnasia level. Since we are living in a society that is still today gender segregated in both working life as well as educational area, we find it interesting that it still exist an paradox which leads us to the question ?why? those girls and boys, woman and man choose so differently. We are not aiming towards study how many girls that have chosen a gender atypical education but rather how these girls that are on the construction program in one of Stockholm?s gymnasium have deliberated and what it is that has influenced them.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This paper is named ?The status of the programme is low? ? Gymnasium teacher?s thoughts and attitudes towards students in the vocational- and the educational programmes. The purpose is, as the title reveals, to examine the attitude of four teachers in the Swedish gymnasium towards the vocational and the educational programmes and the students that attend either one of them. This purpose is accompanied by research which says that the educational programmes? status is higher than one of the vocational programmes.

The aim of the present thesis is to examine discourses about teaching information seeking in upper secondary school teachers. The main questions are: (1) What different interpretative repertoires can be identified among teachers talking about teaching information seeking in relation to students? problem-based tasks? (2) How are these repertoires constructed and what functions can be observed? The theoretical framework is discursive psychology. Two teacher teams from two different upper secondary schools in the Gothenburg area participated in focus group interviews. Group A consisted of four teachers from the Individual Programme and group B of seven teachers from the Social Science Programme.