The purpose of this work is to study a circulation project in Enköping municipality, where the society?s rest products are used to make beneficial products. In Enköping the rest products from waste treatment plants and private sewers are used to fertilize and irrigate Salix plantations that later are harvested and burned at the local combined heating and power plant, ENA Energy AB, to produce electricity and heat. Possibilities to apply this kind of project ona municipality in Russia are also explored.Guryevsk municipality in Kaliningrad region was chosen since there is a need to improve energy systems and reduce emissions to water and air. This municipality strives to become environmentally friendly.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.

How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.

Low- performing pupils at the construction programme.

This report is about how to decide which method is the most suitable as floor covering at projectKlammerdamm in the centre of Halmstad. The covering has to be fire resistant and soundproof inorder to protect the wood structure and stop noise from traveling between apartments. There aretwo possibilities either traditional gypsum board or gypsum-based self leveling underlayment.The roads around the construction site are narrow. A regular twenty-five meter long truck has nopossibility to reach the site. The construction site is small and the storage area is limited.

The projecting time in the construction industry needs to become more efficient toshorten the amount of time it takes to project a build. One of the North's leadingconstruction company NCC constuction Sweden AB has developed a form ofcollaboration called ?NCC project studio? that they use in some projects today.My thesis consists in bringing forth the most important aspects of the collaborationform called NCC project studio. The point of this is to use my thesis to help thecompany develop a quality document that can assist them when starting collaborationbased on NCC project studio in the future.The conclusion of my thesis was that much of the focus needs to be on explaining tothe participants what NCC is aiming to gain from working with the NCC projectstudio and also which important parts that needs to be worked on..

This essay examines the differences and similarities, weaknesses and strengths of the two Cognitive Semantic theories Conceptual Metaphor Theory and Principled Polysemy Approach to Meaning Analysis. To illustrate the two theories, the Swedish verb-particle construction "gå upp" is examined and analyzed accordingly. The results showed differences in the number of polysemous meaning found. The methodological evaluation showed that the differences in the underlying ideas concerning meaning-construction behind these two theories make them incompatible..

AbstractBackground: The factors goals, emotions and motivation are nowadays well researched. Studies that shows the interaction between these three factors does exist, but in a small amount. In all different jobs people encounter these factors, no matter what you?re working with, some experience them daily and others only sometimes.Purpose: We want to study the significance of the interaction between goals and emotions among employees in the construction business, when leaders are about to motivate their employees.Implementation: To succeed with our study and achieve the purpose, we chose to do a qualitative research. We have conducted four visiting interviews and one telephone interview, with both leaders and employees in the construction business.Results: We have through our study found out that the interaction between goals, emotions and motivation are important in the work of construction, even if it?s not something everyone thinks about.

The market of fruit and vegetables develops continuously to become tougher and more complex. The fast development makes it difficult to keep up with all the changes. This is the case for apples and tomatoes. The purpose of this work is to explain what the trade routes are like for Swedish imports as well as the Swedish production of tomatoes and apples, both in the present and the past times. There is also an ambition to create comprehension of the trade routes.

Annedal is a brand new neighborhood in the Bromma part of Stockholm. The neighborhood construction has now reached its halfway point. When finished, 5000 people are estimated to live in Annedal. The focus for the new area is variation. Both housing co-operatives and rented apartments have been built and more are under construction.A study about the valuation of town quality in the Stockholm region was produced by the Stockholm County Council in 2011.

Vehicle simulators are becoming more common in vehicle industries. Company earns lot of money on simulations instead of real tests. Real tests are necessary but not made so extensively as before.In this thesis the building of an vehice simulator will be described and a comparison between three different cruise controls. The three cruise controls are PI-regulator, a regulator who regulates after positions in the terrain and a MPC-regulator. The reason for choosing this three is to see the difference between simple regulation and more complex regulation with respect to fuel consumption, travel time and complexity.The vehicle simulator is made in Matlab/Simulink, Visual Studio and Open Scene Graph.

This Master's thesis aims to investigate librarians' identity construction through the study of their narratives about themselves and their lives. We want to understand in what way the education in Library- and Information science contributes to shape the students professional identity and how these identities then continue to be transformed when they enter their professional lives. We assert that this construction of identity takes place through socialisation. We start with the reference work because we think this is a central part of librarians' tasks. Our theoretical starting point is constructionism, we mean that professional identity is a social construction that continuously is formed and transformed.We interviewed six former students at Library- and Information science at Lund University.

Uppsatsen diskuterar huruvida en ökad reglering av fastighetsmäklarbranschen kan hämma och skada effektiviteten på mäklarmarknaden. För att ge en bredare kontext som kan belysa frågeställningen har en översiktlig jämförelse gjorts mellan Sverige och England..