In recent years it has become more and more evident that man has contributed to much of the climate changes that have taken place during the last century. A major challenge today is to reduce emissions and energy usage at the same time as the global population is growing. To contribute to a better environment, Stockholms Stad has set at target of becoming fossil fuel free by the year of 2050. The construction of new districts is done with this goal in mind; energy efficiency and renewable energy sources are examples of methods to achieve this.Solar energy is considered to be a sustainable energy source and the most common techniques to harvest solar energy in Sweden are solar cells and solar collectors which produce electricity and heat respectively. This report aims to investigate whether an investment in any of these systems would prove to be economically beneficial at Kvarnholmen, a district under construction in eastern Nacka, Stockholm.Since the finished blueprints only cover a small portion of Kvarnholmen, the report examines the possibilities for a house where construction has already begun, Nya Kvarnen.

Under framtagandet av nya produkter måste ett antal prototyper tillverkas för att verifiera konstruktionen. För en metodingenjör som tar fram reparationsmetoder innebär prototyptillverkning att tankar som växt fram under utvecklingsfasen kan provas för första gången på en fysisk produkt. Detta sker relativt sent i produktutvecklingen och eventuella ändringar som kan uppstå på grund av att servicevänlighet inte uppnås blir mycket kostsamma. Om däremot prototypen där metoderna verifieras för första gången är digital och detta sker tidigt blir kostnaderna för eventuella ändringar avsevärt mycket mindre. Modellen som ligger till grund för metodstudierna kan sedan används för att skapa ett utkast till service litteratur, detta medför att även den delen av slutprodukten kommer att vara i fas med övriga utvecklings avdelningar. Under detta projekt har en digital prototyp av en Scania motor använts för genomförandet av metodstudier.

This study was conducted at the City Abattoir in Kampala, Uganda to evaluate the cleaning process, with focus on bacterial pathogens, in a pilot scale integrated bioprocess. This consisted of four steps: anaerobic sequencing batch reactors; aerobic/anoxic sequencing batch reactors; a high performance temperature controlled methanogenesis digester and a constructed wetland. The objective was to determine if this type of cleaning process could be used to clean wastewater from abattoirs in a satisfactory way. The indicator organisms for faecal contamination, Escherichia coli and Enterococcus spp. were used to investigate in what numbers bacteria could be found in the untreated wastewater and how much that was reduced in the different steps of the cleaning process. The water was analysed for Salmonella to see if human pathogens could be found and could survive the different steps of the treatment process.

The Landscape Architecture Program at SLU, Ultuna provide several design courses. Within these courses, students are mainly introduced to one type of design process, a process based on the specific site and its conditions, known as Genius Loci. This report presents a course and a design methodology from Cornell University which aims to provide students with tools for a more conceptual way of thinking about design and architecture. The design method is presented in two stages. First an introduction to the course description and objectives.

Purpose: The purpose of this study has been to identify different actors and processes in music recording. We find this interesting since there have been a lot of changes in the music industry over the last years. Our ambition has been to point out different actors and their roles during the advent of recorded music, and identify different features and processes in the creation of music today and in the future. To fulfill our purpose we have had the following research question: What characterize, in a future perspective, the gathered process during the creation of recorded music from idea to delivery and experience?Method: We have used a qualitative approach for this study and we have conducted seven interviews with persons from different areas of the Music Industry and radio.

Målet med detta arbete var att belysa skillnaderna mellan ett fyravåningshus med trä- respektive halvprefabricerad betongstomme ur ett tekniskt perspektiv för att utröna vilket stomalternativ som är att föredra.Faktorer som belystes var:Tjocklekar på bärverksdelarLängsta möjliga spännvidderInstallationsmonteringElementmonteringGrundstorlekLjudisolerande förmågaRisk för fuktskadorBranddimensioneringProjekteringskomplexitetBygghandlingar från ett befintligt flerbostadshus med trästomme erhölls och analyserades, och ett hus med likvärdig stomme av betong projekterades.Bärverket med halvprefabricerad betong dimensionerades efter rådande Eurokoder och detaljer utformades enligt gällande lagar och regler samt erkänd branschstandard.Ur de tekniska perspektiv som avhandlats i denna rapport väger fördelarna med betong något tyngre än träalternativets fördelar trots att egenskaperna i vissa hänseenden är mycket lika.Betongalternativet ger stora fördelar vad gäller brand och ljud och är samtidigt enklare att projektera, medan trä har sina fördelar i montering och grundläggning. Att välja en stomme av trä till ett flerbostadshus verkar också ha fördelar i de icke avhandlade aspekterna, t.ex. miljö och arbetsmiljö.För att uppfylla ljud-, brand- och fuktkrav i ett trähus krävs det avancerade byggsystem som innebär stor komplexitet i projekteringen vilket kräver ett nära samarbete mellan träprojektör och fabrikör. .

This degree project is a realization of a strategy for collaboration between an industrial designer and employed workmen of a producing company. The collaboration aims to engage everyone involved in the co-authorship of a products design and manufacturing history. The realization has taken place in an open dialogue where the designer no longer owns the design process by himself. The project has been carried out in cooperation with the company Iris Hantverk. The company is owned by the Swedish body for visually impaired and has their main production facility in Stockholm.

Objective: For a long-term and viable economic development to take place in a country it needs to promote creativity and innovation in enterprises. The study applies the process model to study the process of innovation in innovative companies in Sweden. The study also applies the technology commercialization model to indicate the ability of companies to commercialize the technology to the market.Main purpose: The purpose of this work is to study how companies in Sweden proceed with an idea generation and if they manage to commercialize these ideas.Method: This study used a qualitative approach. Multiple case studies & interviews.Conclusion: The innovative ideas in innovative SME:s in Sweden is emerged from randomly events and from systematic developments. Consumer chock is the trigger who draws focus on the idea.

What is the?self? and to become ?one-self?? To resolve this questions possibility I´ve been using the philosopher Søren Kierkegaard metaphysic paradoxes. This essay about the ?self? shows the reader the difference between describing a transcendent and immanent phenomenon and if it´s possible to become or to not become ourselves. The process is a key of the ?self? which Kierkegaard explains the ?self? in and for it-self.

During the years 1950-75 was the construction of building apartments in high speed. A rapidly growing reconstruction requirement is the consequence of the rapid construction speed in these years. The technical lifetime of the different parts of the buildings is about to end and the needs for reconstruction is huge. One of Sweden's national environmental objectives is to reduce the urge of energy in buildings. This calls for radical measures to implement energy efficiency of existing assistance particularly in the assistance that is now facing reconstruction.

This is a critical discourse analysis of the conformation of the conflict in Goma, Democratic Republic of the Congo, as constructed by Ekot, a news-show on Radio Sweden. The ambition of this bachelor thesis is to examine the production of a Congolese conflict for a Swedish audience and to find out how the construction differences with and without a reporter in the field. To obtain this purpose the narrative is studied as well as the use of voices that define the conflict. The construction of proximity between Swedish audience and the Congolese event and the meaning of sound to stabilize the formation of discourse within foreign news is examined as well. To conform and explain foreign news it must be put in relation to a starting point.

What is sketching for a landscape architect? Does it involve anything else than the sketching process, the tool withwhich we work and carry a project through? The answer is yes, it is a process but one that includes many functionslike making notes in drawings or words for remembrance, a way to convey your ideas to others and to clearifyideas for yourself or together in a group. This thesis aim to give a broader picture of what sketches and sketchingis through many voices, and images made by architects, a psychiatrist, a teacher, and landscape architect students.The focus is on the hand made sketch and show many examples of what a sketch can look like.What is a sketch? A sketch can be many things, but the general consensus is that it is made fast and as a draft. Itcan be made in any material, two or three dimensional.

With increased deployment ofintermittent renewable energy, such aswind and solar power, energy storagebecomes necessary to help reduceproduction peaks. Thermoelectric EnergyStorage is a method still in researchphase, which stores electricity in hotwater at a temperature of 120 ° C. Thisthesis aims to examine whether theThermoelectric Energy Storage would bepossible to integrate into existingpower generation such as a combined heatand power plant, and how the technologypotentially could function in theelectricity market. ThermoelectricEnergy Storage consists of a chargingprocess and a discharging process, bothoperating by the working fluid CO2. Toincrease the efficiency of theThermoelectric Energy Storage, wasteheat from the district heating networkis integrated.A model of the Thermoelectric EnergyStorage has been developed and it wascalculated by thermodynamic propertiesof the working fluid, CO2, in thevarious process steps.

The purpose of our study was to examine how missing children are portrayed in media. We wanted to see if there are any recurring story patterns and characters in the texts. We also wanted to examine how the relationship between children and adults are framed and which comprehensive view of children is mediated in journalistic texts.Our questions were: how do Swedish newspapers write about missing children? Which narrative pattern are there in the texts? How are children and adults represented in the texts? What relationship between children and adults are made visible in the texts? What a comprehensive approach to children is constructed in the texts?For this study, we used the media discourse, theories of representation, stereotypes and characters. And theories of narrative, dramatic turns and opposites.We chose to make three case studies in which children suddenly disappeared, the case of Bobby Äikiä, the case of Engla Höglund and the case of Sebastian Hedman.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.