University of VäxjöSchool of Social SciencesBachelor Thesis in Political ScienceTitle: ?Sverigedemokraternas valframgångar 2006 ? En ulv i fårakläder??Author: Emma Haraldsson and Åsa NeuschützTutor: Emil UddhammarThe aim of this study is to explain Sverigedemokraterna?s electoral success in 2006 and the essay assumes that some form of change has occurred. To study this change two hypotheses have been constructed. The first hypothesis concerns the change within Sverigedemokraterna and the second hypothesis concerns the change of the Swedish voters attitudes.Kirchheimers catch-all theory is used to explain the change in Sverigedemokraterna. The catch-all theory states that parties have to change their structure to maximise the number of votes.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

Our Bachelor?s Thesies has been performed in co-operation with Cellplast Direkt AB inLaholm. Our task was to develop a construction that cuts gussets to ceiling disposition as isused to isolation.Our goal with our construction was to increase the degree of automation so that theproductivity increased and also meet the market which is getting tougher and tougher due tothe future business cycle.Cellplast Direkt gave us free hands in order to enable new ideas. A pair different principleproposal was developed and prepared to a final structure.The Bachelor?s Thesies resulted in one PLC - governed machine with three engines that runthree different moves, wich does that the degree of automation increases and the risk forerrors decreases.We have developed a complete production bases to Cellplast Direkt and our hope is that thecompany comes to produce the machine in the future..

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Titel: Investeringsuppföljningar ? En fallstudie på Volvo Construction Equipment i BraåsSeminariedatum: 2011-06-01Ämne/kurs: 2FE13E:3Författare: Aleksandar Stamenkovic och Donald BergströmHandledare: Anders JerrelingExaminator: Fredrik KarlssonNyckelord: Post-audits, Capital Budgeting, Investments, Performance Evaluations, ROI, RI, AARRSyfte: Syftet med detta ämnesfördjupande arbete är att förklara de problem som uppstår när avsaknad av investeringsuppföljning föreligger, samt att förklara för hur rutiner av uppföljningar kan organiseras.Metod: Valet föll på att göra en kvalitativ fallstudie gällande Volvo Construction Equipment i Braås. Kvalitativa semistrukturerade intervjuer har utförts med fyra stycken respondenter på anläggningen. Detta ämnesfördjupande arbete har utförts enligt en deduktiv metod och en diskussion förs angående arbetets validitet och reliabilitet.Teori: Den teoretiska referensramen behandlar relevant teori gällande investeringar och uppföljning, vidare behandlas även kortfattat de metoder som används för att bedöma investeringars lönsamhet på Volvo Construction Equipment i Braås.Empiri: Det empiriska avsnittet redovisar data från de semistrukturerade intervjuerna som fördes med personal på anläggningen i Braås. Dessa bestod av ekonomichefen, controllern samt två projektledare.Slutsats: Resultaten som presenteras behandlar komplexiteten med att följa upp investeringar enligt dess faktiska kassaflöden och förkastar därmed en sådan uppföljning för Volvo Construction Equipment i Bråas.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

The background of the study consists of the fact that knowledge about how eating disorders are developed and maintained is extensive. Socio-cultural factors and media influence when developing an eating disorder is of significance. When reviewing literature and previous research, knowledge about practical attainments when treating eating disorders are insufficient. The aim of the study was therefore to examine how staff who treats eating disordered patients think about body ideals, strive for success and media influence in treatment and rehabilitation. The theory consists of Foucault?s theory of power, how beauty ideals are dependent of the cultural context in which we live and what qualities are associated with beauty and body ideals.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

Abstract This essay is about girls that have chosen a gender atypical education on a gymnasia level. Since we are living in a society that is still today gender segregated in both working life as well as educational area, we find it interesting that it still exist an paradox which leads us to the question ?why? those girls and boys, woman and man choose so differently. We are not aiming towards study how many girls that have chosen a gender atypical education but rather how these girls that are on the construction program in one of Stockholm?s gymnasium have deliberated and what it is that has influenced them.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

The aim of this study was to explore and increase understanding of how a team of colleagues at an upper-secondary school in Sweden works with students with special education needs. The team works with a group of students where the majority have experienced school failure in elementary school. The focus of the study has been to analyze a project that the school undertook 2013 to improve students? results and improve their chances to successfully graduate from their program. Data was collected from relevant documents and interviews with members of the project at hand.

The study aims to illustrate how women victims of male violence in intimate relationships are treated during the legal process and with professional perspective describe what women?s experiences considered to be in the legal process. The study also aims to draw attention to the interventions for abused women during the legal process.The results are based on interviews with professionals in the justice system, and on observations in the courtroom. Overall our results show that abused women are in need of a great quantity of help and support before, during and after the negotiation. The legal process is very stressful for the women.

University of VäxjöSchool of Social SciencesBachelor Thesis in Political ScienceTitle: ?Sverigedemokraternas valframgångar 2006 ? En ulv i fårakläder??Author: Emma Haraldsson and Åsa NeuschützTutor: Emil UddhammarThe aim of this study is to explain Sverigedemokraterna?s electoral success in 2006 and the essay assumes that some form of change has occurred. To study this change two hypotheses have been constructed. The first hypothesis concerns the change within Sverigedemokraterna and the second hypothesis concerns the change of the Swedish voters attitudes.Kirchheimers catch-all theory is used to explain the change in Sverigedemokraterna. The catch-all theory states that parties have to change their structure to maximise the number of votes.