Logistics and supply chain management in the construction sector is an area with great potential for improvements. Today, a lot of the workers time is spent on non-value adding activities. Research has shown that waste is a large proportion of the total production cost in building projects today.The purpose of this report is to analyze problems concerning logistics in the construction sector. Two of Skanska?s construction projects in Uppsala have been analyzed to identify problems.

The transition from having been under another country?s control to becoming a democratic country can, many times, pose difficulties, which has proven itself to be quite common. Estonia and Moldova?s processes towards a democratic regime are two examples of countries with varied success in the final transition phase.When the USSR (Soviet union) fell and collapsed in 1991 Estonia was well on their way from having a communistic ruling to a democratic one due to the fact that their democratic work had already begun a few years prior to 1991. After the collapse Estonia continued with their democratic work and in 2004 the country became a EU member state.

The transition from having been under another country?s control to becoming a democratic country can, many times, pose difficulties, which has proven itself to be quite common. Estonia and Moldova?s processes towards a democratic regime are two examples of countries with varied success in the final transition phase.When the USSR (Soviet union) fell and collapsed in 1991 Estonia was well on their way from having a communistic ruling to a democratic one due to the fact that their democratic work had already begun a few years prior to 1991. After the collapse Estonia continued with their democratic work and in 2004 the country became a EU member state.

We would like to gain a more in depth knowledge of whether the modern orientations both within corporate governance and control philosophy lay the foundation for enterprises? more sustainable success. These both modern orientations are increasingly focusing on the importance of enterprises? setting of goals and visions on the basis of stake holders? interests and the employees? more active engagement in and motivation for the goal achievement. Despite these common inherent characteristics, it is not evident from current scientific debate how such integration actually emerges in the control philosophies of the enterprises.

In the construction industry the number of female managers is very low, only four percent (SCB, 2010). In fact, women with management positions has risen by six percentage overall, the last seven years (SCB, 2010). If women in managerial positions continue to grow at this rate, the proportion of women managers will be equal to that of male managers in 2033. More women are needed in the maledominated construction industry in particular because it is deemed that they have a different way of thinking and acting (Granér, 1994). Nelton (1991) believes that companies can take advantage of female managers to be more competitive on the market, the reason why is because women can see other possibilities when solving problems. Rapacioli (2010) argues that the recruitment of women into management positions not only benefits the individual itself but also the company. We have used a qualitative study with a deductive approach. Six respondents from the same company were interviewed, two of them have management positions and the other four were underemployed.The research question of this paper is: What differences and similarities are seen between male and female leadership in terms of their characteristics in the construction industry?The purpose of this paper is to examine similarities and differences in leadership in the construction industry where the focus is on the female and male characteristics. To fulfill our purpose we chose a qualitative study. We have interviewed six respondents at one company in the construction industry. Two of the six respondents have management positions and the remaining four are employed. In this paper we have concluded that there are some differences and similarities between men and women´s leadership in terms of their characteristics.

This qualitative research is about how Swedish media constructs immigrants in articles. The focus of the study will lie on ten Swedish articles and how they stereotype immigrants, but the demarcation will be for young immigrant boys related to crimes. The purpose of this paper is to highlight how media achieves its goal to construct a group as inferior. This will be implemented with the help of articles from different newspapers that reported on immigrants who have committed crimes. We have chosen to look at different newspapers to see if there is a curtain pattern in the construction of immigrant boy.

The aim of this study is to analyse how female neopagan practitioners form their identitiesindividually as well as collectively. Using Ernesto Laclau?s and Chantal Mouffe?s discourse theory and Anthony Giddens? descriptions of late modernity and self-identity, I intend toinvestigate my informants? construction and upholding of a meaningful identity and sense ofself. I will also look at how the neopagan movement can be viewed as a phenomenon closely interwoven with the overriding tendencies in our contemporary society. Neopaganism is an umbrella term that is used to describe a number of modern nature religions that take their inspiration from pre-Christian traditions.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.

This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

The purpose of this thesis is to analyze the construction of consensus in commune-collaborations. By a review of written material combined with elite interviews we have been able to follow the decision-making and the forming of consensus, in a commune-collaboration called NOSAM, in which they have decided to use consensus as a decision method. The thesis is based on a case study and we have decided to follow a specific issue that has been discussed for some time.We have created an instrument based on the ideal of deliberative democracy, through which we have been able to examine whether the decision-making in NOSAM can be described as a deliberative process or if consensus is formed by other incentives.The study shows that the decision-making in NOSAM cannot be described as a deliberative process, although there are some elements of deliberation. Consensus is formed in a proposition drawn up by the officials for the commune-representatives to agree on. Afterwards, the decision has to be brought up in each commune before reaching a final decision in NOSAM.Our opinion is that having consensus as the decision method leads to difficulties when deciding on bigger issues..

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

The purpose of this thesis is, through both a quantitative and qualitative study, to map out how the interaction appears between the established parties and the radical right-wing party, the Sweden Democrat?s (SD) and their core issue ? immigration in the Swedish parliament. By applying analytical dimensions on the parliamentary protocols regarding the immigration issue between the years of 2010-2012 this study will get an insight on how the argumentation concerning immigration has developed since their entrance into the Swedish parliament in 2010. The result shows that SD, through the rejection treatment of the established parties, fulfilled the three conditions which accordingly to the study's theoretical framework are crucial for the party's future success. In the established parties? reception of SD regarding immigration, SD is, to a large extent, left unchallenged as the established parties rather focus on integration instead of challenge SD in the immigration issue.

Light pollution in urban areas - How to prevent light pollution at construction Jakob Sjöling Light pollution is a relatively new but rapidly growing form of pollution. Society's increasing demand for light coupled with the pace at which lighting technology evolves is accelerating that growth. The purpose of this study was to analyse how the construction industry plan and design outdoor lighting when erecting new buildings, specifically with regards to the issue of light pollution. It also investigated how local authorities work with these issues during urban planning. In both cases special interest was placed in ways to improve the planning and use of outdoor lighting in order to minimize light pollution.

Our everyday life is becoming more active and the activities we perform influence the way we dress. Due to an increase in activities undertaken in an urban environment, demands are changing and the need for active wear that meets the new demands follow suit. The four characters represented in the research can be seen as a reflection of the functional features needed, including base layer, mid layer/insulation and shell.Despite the increase in activities, most of our clothes are still constructed on static dummies or drafted on a table in 2D and the main developments within the active sportswear field is driven by material innovation. By creating garments on a body in movement, my aim is to develop new functions and expression in active sportswear through construction.Construction methods in active sportswear are examined and understood through observations and reconstructions and constitute the foundation of a study of movement for a design recovery.The movement and features required for leading an active urban life sets the direction of the development of new func- tional garments. A series of trial and error sessions and draping fabric on a live model in movement created the prototypes used in functionality tests to establish their feasibility.