Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

The defence unit´s archive stretches over a time limit between the middle of 1971 to the end of 1987. The records the archive mainly contains are concerning the civil defence, inspection and construction of shelters, war- and crisis planning. The majority of the records are registered record, as often is the case with an authority?s archives. The main problems that occurred concerned what should or shouldn´t be public, the principle of provenance and what to prioritize; finish the project before deadline or make sure the records are prepared for a storage that ideally should last for several lifetimes..

Sandvik står inför många nya utmaningar då världen globaliseras. Sandviks strategiska plan syftar till att nå världsklass inom verksamheten och värdeskapande för aktieägarna. Sandvik Mining and Construction Köping AB är i startfasen när det gäller förbättringsarbete och 5S. 5S står för sortera, systematisera, städa, standardisera och se till.Syftet med detta examensarbete är att undersöka hur man genomför en förändring på bästa sätt och applicera det på implementeringen av 5S på Sandvik Mining and Construction Köping AB. Målet med examensarbetet är främst att göra en nulägesbeskrivning samt utveckla och arbeta efter framtagen arbetsmodell.

Purpose: The purpose of this paper is to examine if companies? incentive programs for employees is designed in such a way that it makes it possible for managers to reach their goals. Method: Qualitative with a semi standardised questionnaire Results: Our results is that the incentive programs for employees in their present form don?t give the companies a good possibility to effect the employees to perform towards the goals of the system. The performance measures in the incentive programs for employees is suitable in comparison with the goals of the program but the construction and the use of the systems doesn?t give a satisfied result in comprising with the goals.

Rapporten undersöker Volvo Construction Equipment Components axelmontering för axlar till Dumper och Hjullastare. Arbetet har utförts med intervjuer, studiebesök på andra fabriker och en detaljerad studie av monteringsavdelningen och dess angränsande avdelningar vilka levererar artiklar till monteringsstationerna. Undersökningen har resulterat i ett förslag där fördelarna av en stationsbaserad montering och fördelarna med en linjemontering kombinerats. Arbetet presenteras i rapporten och i en dator animerad 3D simulering av förslaget till en ny monteringslayout. Jag anser att Volvo CE Components och montörerna på monteringsavdelningen skulle gynnas av monteringslayouten som redovisas i rapporten..

The relation between LIS and physical bibliography is examined primarily through an analysis of such LIS literature as applies physical bibliography in research or otherwise discusses its relevance to information studies. Quite a number of scholars are stressing the usefulness of this bibliographical tradition, even though its position in LIS agenda as a whole seems to be less established. These scholars suggest that physical bibliography presents interesting conceptual and theoretical implications for many of the central objects of study in LIS, for example, knowledge organization, information retrieval, and information seeking. It is also suggested that physical bibliography could help deepen our knowledge and understanding of the digital media ecology. Physical bibliography is foremost seen as a method for the analysis of documents, a method in which not least its terminological apparatus may be a significant tool.

This study is an examination of the stadium fever prevailing in Sweden. It is built stadiums in Sweden as never before. The high cost of these constructions end up in the end at the Swedish taxpayers. The study examines through the hedonic pricing of real estate how local residents value the new stadiums. The result indicates that local residents put a positive value in the costly and sumptuous buildings.

According to FSC (Forest Stewardship Council) shall at least a mean of 10 trees per hectare including riparian zones and other areas with high biological values be left in final felling. In addition large clear areas should not be created and all retained trees with high environmental value shall be spared. To leave trees in final felling means a lower cutting volume and hence a lower income from the cutting, but it also means that the production in the next generation becomes less because of competition. The aim of this study was to evaluate the effect retained trees have on the production in the new generation of forest, and to investigate if there is any way to lower this effect. The environmental care has also been estimated by the amount left in final felling.

Successful forest regeneration is a prerequisite for sustainable forest management. Therefore, it is important to prevent browsing damage on the commercially important tree species Scots pine. In this study I have tested a new alternative way to increase the available amount of forage and increase the use of these resources by especially moose. The method is based on a slash treatment at harvest, where the accessibility of slash as forage is increased during final felling or commercial thinning by gathering the slash and putting the Scots pine slash on top of the slash piles. This study has compared the availability of forage, the amount of browsed biomass and the number of fecal pellet groups between conventional and slash treated stands after final felling and commercial thinning in southern Sweden.

This one-year master's thesis investigates the late part of the Middle Neolithic on the island of Gotland. This thesis has been written without the influence of a singular theoretical pespective, and has therefore seen input from the processual, and postprocessual theories. By using several perspectives, an attempt is made to view the material remains used in the most objective manner possible. The specific aim of this thesis is to investigate whether the Mid-Neolithic inhabitants of Gotland were a part of the Corded Ware culture (or as it is called in Sweden, the Battleaxe culture or the Boataxe culture). Most recent literature has concluded that Gotland was never a part of the Battlexe culture, though this thesis has discovered many parallels with the mainland culture, including the production of similar objects and ritual practices.

This report evaluates whether an interpreted high-level garbage collected language has enough information about its memory behaviour to make better cache decisions than modern general CPU hardware.With a generational garbage collector, depending on promotion algorithm and generation size, around 90% of all objects never leave the first generation. This report is based on the hypothesis that, because of the low promotion rate, accesses to higher generations are sufficiently rare not to benefit from caching.To test this hypothesis, we built an operating system with a Scheme interpreter in kernel mode, where the interpreter controls the cache. Generic x86 PC hardware was used, since it allows fine-grained control of cache decisions.Measurements of execution time in this interpreter show that disabling the cache for generations higher than the first does not give any performance gain, but rather a performance loss of up to 50%.We conclude that this interpreter design is not an improvement, but cannot conclude that the hypothesis is false in general. We suggest building a better CPU simulator to gather more data from which to make better caching decisions, moving internal interpreter data structures into the garbage collected heap and modifying the hardware to allow control in the currently rigid dimension of where data is cached---for example separate control of instruction and data caches and separate data caches for different areas of memory..

In this report statistics concerning the reliability of sprinkler systems from seven countries has been analysed. The objective of the report has been to determine the reliability of sprinkler systems in Sweden and to present suggestions on measures to increase the reliability. The main conclusion that has been drawn is that the reliability of sprinkler systems in Sweden is 92 percent according to the analysis of Swedish statistics, and that this figure finds support in statistics from other countries. Further results are that the quality of design, installation, maintenance and inspection of sprinkler has to be improved and that the Swedish incident report has to be revised..

Today's high oil prices and more stringent environmental requirements have led to that manufacturers of mobile construction equipment try to make their products more energy efficient. With this in mind a project about hybridization of hydraulic systems has been formed. The purpose of this project was to analyze the savings that can be achieved by hybridization of hydraulic systems. A reach stacker truck (Kalmar DRD450-80S4XS) were simulated in some load cases with conventional hydraulic systems and with three types of hybridized hydraulic systems. Different parts of the hydraulic systems were also analyzed separately.

Companies that invest in e-learning have different expectations regarding the outcome of the investment. According to literature and articles it is common that companies see reduction of costs as the primary benefit with e-learning. Therefore we ask ourselves the question if companies have attained the expected benefit of the investment in e-learning and to what extent cost reduction have been a determining factor in the investments? The purpose of the thesis is to examine if companies that invest in e-learning have attained the expected benefits. We also want to examine what the reason for investing in e-learning is and if cost reduction is the primary reason for investing.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.