An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

A lot of mine waste rock and tailings arise from all mining processes and have to be stored in an appropriate way. Tailings are deposited in impoundments retained by tailings dams. The objective of tailings dams is to retain the slurry from the mining process and in that way prevent spill into the surroundings that might be harmful for the environment. Tailings dams are often constructed as staged embankments so that construction costs and demand of materials are spread more evenly over the period of deposition.The objective of this thesis has been to compile information about and evaluate events at Swedish tailings dams and also to develop a collective database for all Swedish mining companies for all tailings dams and all events that occur at tailings dams.Information about 60 events at Swedish tailings dams has been gathered and evaluated. The evaluation has been performed by comparison between and analysis of individual parameters and also by use of a multivariate statistical method called PLS.

There are several different methods of assessment of functional communication in individuals with aphasia. However, these are not very established in Sweden. A number of assessment methods are not translated and adapted to Swedish. The views about what functional communication means are scattered. The purpose of this study was to, with the help of a questionnaire survey, identify how Swedish speech and language therapists assess functional communication, to what extent and what they want that an assessment method should contain to be clinically useful.The study involved 54 clinically active speech and language therapists in the area of aphasia.

Construction accounts for about 35 percent of the total Swedish energy consumption and most of the energy is used by the large housing stock from the so-called ?Million program?. In the national action plan the government has put forward in energy efficiency. It is mentioned that existing buildings account for more than 90 percent of what is expected to be the housing stock within the coming 50 years. In order to meet environmental objectives its required that the existing stock be reviewed for energy efficiency. The goverment is now initiating a national framework with a budget of SEK 300 million Swedish crowns per year for five years, starting in 2010 to achieve the goal on energy efficient buildings. Energy efficiency of buildings in both new construction and above all within the existing stock are addressed.

The main purpose of this thesis was to examine the collection management at five different hospital libraries´ children and youth?s section to discern different roles of the collections. We made qualitative interviews with five hospital librarians. The purpose was also to see how the collection development affected the different roles of the collections. We used two theories.

This thesis has evaluated environmental classifications of projects and the lessons learned to explore what the possible ramifications of implementing this in the construction and infrastructure are. Companies today are looking to develop methods to demonstrate their environmental commitments, but there is an uncertainty regarding the contribution of environmental classifications in this aspect.The literature review presents the theory of environmental classification, which provides a general knowledge of its function. The empirical data is based on an analysis of existing classification methods and qualitative interviews. The analysis shows specific environmental classification system for the area of construction and infrastructure. CEEQUAL is currently the only environmental classification applicable to Swedish projects and therefore serves as the basis for the continued analysis.

Dental implants that are integrated into the jaw bones are widely used to replace lost teeth in human beings. Tooth-loss is often related to loss of the surrounding alveolar bone. This can make implant placement difficult and a bone substituting material may be required. The standard method is to use a bone graft harvested from the patient which requires additional surgery than that needed for implant placement. Limitations in the amount of bone that can be harvested also pose a problem.

For an outdoor environment to function optimally as a playarea requires that it is flexible, that is, contains places and elements that give room for the imagination and for own interpetretations, and also that the children in some way can influence and change their surroundings. It is also important to have variety, both in the sense that the playground has a unique character that distinguishes it from other places, and that it allows many different games and activities. There should for example be room for both wild games of running and moving around where many children can participate, and calm corners to withdraw to for rest or quiet play. A good playground should surprise, challenge and encourage children to discover their surroundings. One way to achive this is to use plants and materials from nature, whose irregular forms and structures can become interesting elements to explore. Vegetation also gives sence-experiences of various kinds, materials like twigs and leafs to play with and a place to play house.

Detta examensarbete utreder frågeställningen om den såkallade "olyckskorpen" ? alltså yrkesarbetaren som är inblandad i flertalet arbetsplatsolyckor ? verkligen existerar. Frågan är lite av kontroversiell typ och har diskuterats sedan 1940-talet, utan något avsevärt utslag eller dokumenterat alster.Samarbetspartner blev NCC Construction och två av deras stora arbetsplatser i Stockholmsområdet valdes som mätfält; Söderby samt Frösunda.Undersökningen baserades på datainhämtning genom enkätformular till yrkesarbetare och ledning på de utvalda arbetsplatserna, genom erfarenhetsinhämtning från platschefer och lagbasar inom NCCs organisation samt från YTH-studenter på byggprogrammet. Författarnas egen erfarenhet från branschen har också vägts in i bearbetningen.Resultatet gav ingen olyckskorp att sätta fingret på, men en indikation från samtliga håll att egenskaper som kan knytas till olyckskorpen förekommer i branschen. Detta gav upphov till en teoretisk modell att användas för att ringa in olyckskorpar på individuell nivå i en vidare undersökning..

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

Quality assurance for Scania engine componentsScania engines have become one of the world?s most renowned corporations in themanufacturing of engines. This is mostly due to the quality and performance thatScania have shown. However, this does not stop Scania from trying to achieve moresuccess in the fields of development and research to assure the quality of theirengines.The purpose of this thesis is to show how Scania ensures the quality of the enginecomponents, both those who made externally and internally at Scania, also inclusivethe manufacturing and assembly process.Three engine components were examined: D16 block engines, water pump andXP-Iinjectors. The study included the whole process from the step of supplying therow materials to the last step in production functional test.In this thesis an investigation of how other companies are working with qualityassurance was conducted.

The purpose of this thesis is to investigate respectability and the construction of ?free love? in Swedish feminist debater and playwright Frida Stéenhoff?s (1865?1945) drama Lejonets unge (1896). In 1897 the first production of the drama was set in the small town of Sundsvall in Sweden and caused a public storm be-cause of its plea for free love for both men and women.Through an intersectional perspective, where the axes of class, gender, sexual-ity, religion, nationality and age are central and with a starting point in Beverly Skegg?s concept ?respectability? I investigate how ?free love? is constructed in the drama. I also link the construction of ?free love? to the historical context of the debate concerning sexual morality and marriage which was intense in society and literature in Scandinavia in the late 19th century.In the drama the plea for ?free love? is created mainly through the character Saga Leire.

On ocean beds around the world sinking particles of residual biomass from animals and vegetation have, over time, accumulated into thick layers of sediment. For researchers these layers of sediment contain valuable information about the earth?s past climate, information that can be used to predict future climate change and to estimate natural vs. human causes of today?s global warming.The Institute of Geosciences at Stockholm University studies sediment cores that have been acquired with an apparatus called piston corer.

The main purpose of this thesis has been to address the problem connected with conservation ofspecific objects in historic buildings that have a protected building status. The immaterial demandsand environmental concerns of a place of cultural significance are discussed as opposed to the welladaptedsetting of a museum, with regard to long-term preservation. In an authentic interior of acertain era, large-scale individual treatments of the objects that define it and regulations forconservation-related reasons, may not be considered a worth-while effort, as it is often the integrityof the environment as a whole that has been declared as significant. To investigate the relationshipbetween object and its context, a case study has been conducted by examination of the propertycalled ?Curmans villor?, located in the seaside community called Lysekil.