Due to the obvious fact that one can never be hundred percent sure of what's hiddenunder the ground surface, construction work is naturally hard to project.However, many of the work methods are executed in the same way on variousprojects. The department of construction work at JM AB region öst describes a lackof follow-ups and feedback between the calculators and production managers.In this thesis we have studied the communication between these groups and alsohow they share experiences and knowledge. In order to get the full pictureof the day-to-day operations we used three methods to gather information. Studyingliterature gave basic knowledge of theories about feedback, and thenecessity of working with giving feedback. In order to understand the process ofconstruction work we made several interviews, both structured and nstructured.

During the spring semester of 2012 did Petra Hollsten independently a thesis on reducing the environmental impact of capsule for coffee, tea and chocolate. The work was performed at Karlstad University, Faculty of Technology and Science under the Bachelor of Science program in innovation, technology and design. The project's scope is at 22.5 points.The employment for this project is the company Löfbergs Lila AB in Karlstad. Supervisor at the Principal has been Maria Herou Wallner and Sandra Lyxell, product managers. Supervisor at Karlstad University is Monica Jakobsson, lecturer and program leader for innovation and design engineering program.

?ÄTA-work? (Changes, Supplementary and Retiring works) is more or less common in all construction projects whether it is about houses, roads or railways, in the planning stage, or in the construction stage. For the Swedish Transport Administration, which is the largest purchaser of infrastructure in Sweden, ÄTA-work is a hotter topic than ever.Economists and managers want to draw conclusions on the projects share ÄTA-work, while the project manager is concerned about whether it is possible to draw any conclusions at all as each project is unique in itself and has its own merits. There is a big variation in the amount of ÄTA-work in different geographic districts in the Swedish Transport Administration.This study shows that the Swedish Transport Administration does not have a unanimous approach regarding the management of ?ÄTA-work?.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

In this thesis a concept for floor hatches for foam pits has been developed. Since there is an existing solution that is powered by hydraulics and is expensive, the goal was to develop a cheaper solution, as simple as possible.A number of different concepts were developed and evaluated. A concept with five sections that are pulled to the side and stacked on each other was chosen as it was thought to have the lowest risk of crush injuries and to be easiest to manage and control. In the opening behind the foam mattress a lifting table is placed to regulate the height of the stacked sections.To be allowed to be installed in the floor of sports halls the sections must be dimensioned according to the construction standards for these types of buildings. Different dimensions of beams in steel and wood materials were evaluated and of those, who lived up to the requirements of the standard, a concept was chosen.

 AbstractThis is a bachelor?s thesis within the program society development on the collage Mälardalenshögskola. The subject that will be handled is knowledge recycling, this intervenes very wellwith the program I am undergoing, and this is because Construction Company?s does ingeneral do the same mistakes over and over again. In the long run this will mean higher endprices for the end user.

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow.

Construction projects are generally designed as a general contract or a complete contract. In a general contract the commercial contract that is being used is AB 04 and related advice and instructions, AMA AF 07. In AB 04 there is an insurance requirement that stipulates that the contractor shall take all risks and liability insurance for the contract where the client must be co-insured.Construction law is almost exclusively regulated by the various standard contracts, one of those is AB 04. The Construction Contracts Committe is an organization that has published the standard contracts in this area of law and also the advice and instructions to help the parties to understand the agreements. The insurance requirement occurs in an area of law that is complex and the meaning of the concept is not entirely clear, nor which of the parties? interests and responsibilities that are covered by the types of insurances that are provided by the insurance requirement.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

The main purpose with this study is to describe teachers? use of textbooks and other teaching materials in upper secondary school (gymnasiet) in Sweden, and to discuss the use according to school subject and teacher style. Data was collected in two different ways. At first twenty classroom observations were made during lectures concerning the subjects Swedish (mothertounge), English (foreign language) and religion. Then four open interviews were carried out with the teaching teachers.

This final thesis is carried out at BAE Systems Hägglunds in Örnsköldsvik. The mission was to construct and integrate a new semi-active damping unit in the terrain vehicle BvS10. Questions that came up during the process, among others, was how to mount the damping unit to the vehicle in a flexible way without exposing it to unnecessary wears.A generation of the concept is made in 3D using CATIA V5 of a possible solution to the problem. The idea is to weld the unit to the skid girder which is one of the main constructions of the track system. In this way the damping unit will come closer to the track system, which will partly protect it from impacts from below and minimize current problems with breaking forces in the torsion shafts.The complete construction was then analyzed, first by theoretical calculations and then with the FEM-tools in CATIA V5.

Syftet med undersökningen är att undersöka, beskriva och analysera kring hur vida det finns ett bra substitut till bomull. Undersökningen kommer att belysa hur marknaden ser ut i dag och vilka material som används. Vidare utreds parametrarna funktion, kundnytta och hållbarhet, som kan komma att spela roll i valet av material för producenter av yrkeskläder. I dagsläget finns det inget solklart val av material som skulle kunna mäta sig med bomullen gällande de parametrarna som uppsatsen tar upp. Vad man väljer att använda istället för bomull beror mycket på hur företagen väljer att fokusera gällande just funktion, kundnytta och hållbarhet.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

The purpose of the study was to determine the attitudes of the teachers of Reggio Emilia inspired preschools concerning the science work with children between the ages of one and three, as well as their opinions on how the physical preschool environment and the choice of materials influence their scientific work. The study was conducted in three departments of two different kindergartens. Although both kindergartens called themselves Reggio Emilia inspired, their working methods and their environments differed largely. None of them were originally built as Reggio Emilia inspired preschools. One of the kindergartens strived to design their indoor environment the same way as the preschools of Reggio Emilia are constructed, there for they were setting up different stations where the children themselves have the opportunity to explore various scientific areas.