While the call for regulations against greenhouse gas emissions are louder then ever before, demand for oil is also at an all time high. Oil companies face the dilemma of making sound business without being perceived as environmental villains. In this essay I will examine how BP, one of the largest companies in the world, broke rank with the industry and devoted itself to being an environmental friendly oil company. The actions and motives of this change will be evaluated through up-to-date theories about company motivation to environmental adaptation. We see that BP:s transformation can be well explained through Simone Pulvers theory about the socially embedded company.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

Light pollution in urban areas - How to prevent light pollution at construction Jakob Sjöling Light pollution is a relatively new but rapidly growing form of pollution. Society's increasing demand for light coupled with the pace at which lighting technology evolves is accelerating that growth. The purpose of this study was to analyse how the construction industry plan and design outdoor lighting when erecting new buildings, specifically with regards to the issue of light pollution. It also investigated how local authorities work with these issues during urban planning. In both cases special interest was placed in ways to improve the planning and use of outdoor lighting in order to minimize light pollution.

The aim of this research is to find out what environmental impact a wave power park has on the Swedish west coast by creating a consultation paper (?Samrådsunderlag?) for the Lysekilproject at Uppsala University. To highlight the complexity of the problem a system analytic approach was used and illustrated by a Causal Loop Diagram.The overall assessment of the Lysekilprojects wave power park at the Swedish west coast is that it will have a low impact on the environment. This is due to the relative small size of the wave power park and some technical solutions made with the environmental aspect in mind. Artificial reefs and a sanctuary for marine species are effects created by the wave power park and in the longer term the impact will give access to an untapped source of renewable energy, wave energy.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

The Swedish boat industry is considered quite conservative and subject to only limited development. The purpose of the study is to explain the structure of the boat industry, to analyze and evaluate ways of competing and provide recommendations for developing a competitive strategy. The aim of this thesis is to explain how to be competitive in the Swedish boat industry. To be able to do so three areas are used to deepen as well as broaden the understanding. The three areas within competitiveness we have chosen to highlight are differentiation, individualization and distribution.

About 30 % of our greenhouse gas admission comes from the food we are eating, and food plays a crucial role in the choice of destinations. The tourism industry has a great opportunity to affect our food habits. Used in the right way, the industry can teach us to eat more environmental friendly..

About 30 % of our greenhouse gas admission comes from the food we are eating, and food plays a crucial role in the choice of destinations. The tourism industry has a great opportunity to affect our food habits. Used in the right way, the industry can teach us to eat more environmental friendly..

Everywhere you look in today?s society many kinds of people are constantly interacting with each other. Especially in large groups of people working together, the phenomenon is even greater. In the construction industry there are many kinds of parts that need to come together in order to get sustainable and successful results. Therefore the relationship between the contractor and the construction client must be at its best.

The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses  The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.

Background: Studies that have been made in male-dominated organisations shows that only few women have succeeded in advancing to the higher positions in all businesses. Statistics shows that merely 4 % of the managers in all building companies are female. The manager role has earlier always been classified as most suitable for men resulting in barriers for women who strive for management positions. This problem is now very renowned and is called the glass ceiling. To improve the current situation, both the organization's structure and culture, have to be modernized for more women to succeed and get the courage to get into the industry.

The construction industry develops at a high pace today. Because of this the construction companies has to rethink and try to develop at the same pace. One of the biggest challenges in the construction industry today is to improve the logistics since improved logistics leads to lower costs. This is something that the construction companies have started to realize and they are beginning to invest more money in order to improve the logistics. It is especially important to have good logistics when the conjuncture turns for the worse.

The purpose of this report was to identify the current waste management of non-hazardous construction and demolition waste in a few Swedish construction companies, based on the different steps in the waste hierarchy with a focus on waste prevention, reuse and recycle. Additionally, the purpose was to attempt identifying opportunities, obstacles and as well as to propose possible solutions from an environmental perspective. The method used was a qualitative study using interviews conducted through emails and phone with employees occupying positions that could answer this reports questions. The results of this report indicates that waste management of construction and demolition waste has improved, and less waste goes into landfills. The concern is that the overall amount of waste being produced is not decreasing, thus calling for actions preventing the production of waste.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.