The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..

This thesis includes a mechanical engineering design work performed incollaboration between ÅF and Halmstad University. The work is done by FredyOlsson?s methods of Principle- and Primary Construction and David Ullman?stheories of Design for Assembly.The group was commissioned by ÅF to produce a concept to narrow down theassembly time of today?s luggage doors by reducing the numbers of adjustmentoptions. They also wanted it to be easier to mount the assembly by making itpossible to adjust the door in a closed position. Today luggage door takes, with its10 adjustment possibilities, around 4 hours each to assemble and ÅF wanted anassembly time around 10 minutes per door.Initially a preliminary study was made where the group began reviewing today'sconstruction and mounting of rails and doors on buses.

This essay describes coordination of the work environment on construction sites where many entrepreneurs share workplace. As employer, the entrepreneur has main responsibility for the workers safety on the construction site, the project supervisor is responsible for the work environment, and to coordinate the work environment a coordinator of the construction work environment is appointed. The purpose of this essay is to describe how the work environment is ensured on a shared workplace. In order to answer the essays questions I?ve used a juridical method to interpret the law.

Stress and burnout are two words that are commonly occurring in many contexts today. More and more people experience that they are stressed and that they does not feel well. The long term sick -leave increases as a consequence of people being burned out. These phenomena prolong over all ages, sexes, classes and professional categories, which probably means that the construction industry would not be spared.  In the construction industry, stress and bad health are no new phenomenon, already during the 1970s and big parts of the 1990 s, the construction sector were exposed to the phenomena.A sector that has a large turnover annually cannot presumably be faultless.

During the last decade executive coaching has become an increasingly popular method of management development. Few studies have been conducted within this area, especially in Sweden, and little has been said about the construction of management in executive coaching. The purpose of this master?s thesis is to study executive coaching from a social constructionist perspective, focusing on the construction of management. The two research questions are: How is management constructed in executive coaching? How can we understand the construction of management in executive coaching? Additionally, we identify gender as a social construction of importance and thus include a gender perspective in our analysis.

This essay examines the visual art of Helena Blomqvist with theory of performativity from Judith Butler among others, with a focus on the potential of visual art to question and dislocate norms. It consists of an analysis of three works of art from three aspects: the work of art, the viewer and the situation, and eventuates in an analysis of how the works relate to representation and norms. The construction of the works is related to Butler's theory of identity construction..

Denna rapport är ett inledande steg mot att förbättra arbetsmiljön för svetsare vid påsvetsning med Uddcomb Metoden i massakokare. Syftet med rapporten är att analysera problemet med värme och dålig luft samt förklara hur och varför problemet uppstår. I arbetet ingår även att ta fram olika lösningar för att slutligen hitta ett komplett system för ventilation och kylning. Den föreslagna lösningen består av ett integrerat kylsystem och ett koncept med mindre fläktar, kallade torpeder, som monteras på arbetsplanen vilka driver ut varm och smutsig luft snabbare ur kokaren. Den föreslagna lösningen utreds även ur ett ekonomiskt perspektiv.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

The aim of this study was to gain a comprehension of managers experience of their identity and their construction of identity in the work sphere. 14 semi-structured interviews were performed with managers in the public sector. The interviews were analyzed from a hermeneutic approach. The results showed that the managers´ experience of their identity and their construction of identity were full of nuances and was characterized by a being and a becoming. The managers had several social identities at their disposal, which were brought to the fore due to the situation.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

TAT?s Cascades and Kastor are programming languages used to create graphical user interfaces (GUI) for mobile phones. TAT Tutorials is a dynamic, interactive tutorial site for these xml-based programming languages. An editor will be available for download to enhance the learning process..

One of the aims of this report has been to make an inventory of the building trade market to see which document handling systems that are available. The secondary aim was to document the users´ demands on the systems and other demands such as quality assurance. After this, the document handling systems Byggnet and Lotus Notes, which are rather complex systems, have been analysed. Finally a recommendation has been made. In the inventory of the marketthe internet has been used because it is there the latest information can be found.

This thesis is written at WSP management and investigates the practice of pre-project planning and feasibility studies at Swedish construction companies, through the study of the ongoing feasibility study of the mall Sturegallerian in Stockholm, and through interviews with experienced project managers in the construction industry. There is currently a big span in the way Swedish construction companies plan the pre-project phase and the aim of this thesis is to present a more generic and standardized way that helps minimize project risks and maximize efficiency and profit. The result is a generic model which can be used in pre-project planning. The model describes the phases in the preproject planning process and the activities that span these phases. Is also describes the categories of professions that need to participate in the preproject planning group and which activities that each profession executes. The other result is a list of factors that need to be considered for a well performed pre-project phase, as found during the interviews. Among others the thesis stresses the importance of involving the client as a key participant in the process.